HOME   Cart(10)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

JJG 1080-2013 English PDF

US$439.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
JJG 1080-2013: Verification Regulation of Wheel-Checker for Railway Locomotives and Vehicles
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
JJG 1080-2013English439 Add to Cart 4 days [Need to translate] Verification Regulation of Wheel-Checker for Railway Locomotives and Vehicles Valid JJG 1080-2013

PDF similar to JJG 1080-2013


Standard similar to JJG 1080-2013

JJG 1114   JJF 1280   JJF 1126   JJG 1088   JJF 1088   JJG 1081.1   

Basic data

Standard ID JJG 1080-2013 (JJG1080-2013)
Description (Translated English) Verification Regulation of Wheel-Checker for Railway Locomotives and Vehicles
Sector / Industry Metrology & Measurement Industry Standard
Classification of Chinese Standard A52
Classification of International Standard 17.040
Word Count Estimation 19,176
Regulation (derived from) ?State AQSIQ Announcement 2013 No. 7;
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine
Summary This standard applies to railway rolling wheels inspector (hereinafter referred to as checker) initial verification, follow-up test and use checks.

JJG 1080-2013: Verification Regulation of Wheel-Checker for Railway Locomotives and Vehicles

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Verification Regulation of Wheel-Checker for Railway Locomotives and Vehicles State verification procedures People's Republic of China Railway Locomotive wheel inspector Issued on. 2013-01-06 2013-04-06 implementation The State Administration of Quality Supervision, Inspection and Quarantine released Railway rolling stock wheels Inspector Verification Regulation Focal point. the National Railway special equipment metering metering technology committee Special railway length of the Technical Committee The main drafting units. the Ministry of Railways Institute of Measurement Standards Participated in the drafting. the Beijing Railway Star Technology Development Co., Ltd. Liuzhou Branch Road, measuring instruments limited liability company This procedure entrust the national railway special equipment measurement technology committee railway length measurement technology division The Committee is responsible for interpreting surgery The main drafters of this procedure. Wang Yanchun (MOR Standards and Metrology Institute) Lijun Xia (MOR Standards and Metrology Institute) Drafters participate. Meng Jing (Beijing Star Technology Development Co., Ltd. National Railways) Ancient Healer (Liuzhou Branch Road, measuring instruments limited liability company)

table of Contents

Introduction (Ⅱ) 1 Scope (1) 2 Overview (1) 3 metering performance requirements (1) 3.1 Measurement range (1) 3.2 Face surface roughness (1) 3.3 scale mark width (1) 3.4 vernier label side edge to the distance between the surface of the main scale marks (1) 3.5 straightness measurement reference plane S (2) Distance 3.6 tread wear measuring tape and measure the position of the reference plane S (2) 3.7 rim thickness measurement reference plane S perpendicular to the line of (2) 3.8 rim (hoop) straightness measuring the thickness of the line (2) 3.9 Tread Wear probe from the probe flange thickness extending horizontally from the vertical line (2) 3.10 tread wear measurement of the reference plane S positioned perpendicular to the face (2) Indication error 3.11 Tread Wear measuring tape (2) Indication error flange thickness measured 3.12 feet (2) 3.13 rim (hoop) Indication error thickness measuring tape (3) 3.14 QR measurement point to locate the positioning surface tread wear measurement of the vertical distance (3) 3.15 QR value indication error of measuring tape (3) 3.16 avoid indication error from the measuring tape (3) 3.17 Digital inspector Repeatability (3) Indication stability 3.18 Digital inspector (3) 4 General Requirements (3) 4.1 Appearance (3) 4.2 Interaction of each part (3) 5 control of measuring instruments (4) 5.1 test conditions (4) 5.2 Verification Project (4) 5.3 Verification Methods (5) 5.4 Verification Results Processing (7) 5.5 test cycle (7) Appendix A Wheel Inspector classified schematic form (8) B railway rolling stock wheel inspector seized a combination schematic appendix (10) Appendix C Railway Locomotive wheel inspector test records (11) Appendix D calibration certificate and test results in the notice page format (12)

Introduction

This procedure is based on the TB/T 2597-2005 "railway rolling stock wheels Inspector" and "Railway transport EMU Servicing procedures "(Beijing. China Railway Publishing House, 2007, p. 1) established. This procedure was first formulated. Railway Locomotive wheel inspector verification procedures

1 Scope

The order applies to railway rolling stock wheel inspector (hereinafter referred to as the inspector) initial verification, subsequent verification And the use of checks.

2 Overview

Check the thickness of the rim is mainly used for direct or indirect (such as contour method) locomotives, vehicles and EMU wheels Degrees, the tread wear depth, EMU wheel QR values or rolling stock vertical wheel flange wear, abrasion and local Tread Depression depth, rims (tire) Thickness, tread peeling length. Inspector Inspector divided locomotive wheels, vehicle car Check the wheel and the wheel EMU checker three, the structure diagram in Appendix A. Display device may be cursor and type Digital. NOTE. QR rim thickness measurement value is the point to the top of the rim at the level of the inside edge down to 2mm distance.

3 metering performance requirements

3.1 Measuring range Inspector of each measurement scale measurement range should meet the requirements of Table 1. Table 1 inspector measurement scale measurement range Unit. mm Measurements Inspector Type Measurement Range Flange thickness Check locomotive wheels 22 to 37 Check the vehicle wheels 20 to 35 EMU wheel inspector 20 to 37 Rim height Check locomotive wheels 25 to 40 Check the vehicle wheels 24 to 38 EMU wheel inspector 25 to 40 QR values EMU wheel inspector 3 to 13 Rim (hoop) Thickness Check locomotive wheels 38 to 95 Check the vehicle wheels 22 to 70 3.2 Face surface roughness Surface roughness Ra of the upper face of each inspector is 1.6μm. 3.3 scale mark width Vernier and main scale mark width of 0.12mm ~ 0.20mm, other scale marks width of 0.12mm ~ 0.25mm; variety of scale marks the difference in width should be less than 0.05mm. 3.4 vernier label side edge to the distance between the surface of the main scale marks Vernier label side edge between the main scale marks to surface distance should be no more than 0.3mm.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of JJG 1080-2013_English be delivered?

Answer: Upon your order, we will start to translate JJG 1080-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of JJG 1080-2013_English with my colleagues?

Answer: Yes. The purchased PDF of JJG 1080-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.