|
US$359.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 45439-2025: Technical specification for the application of traceability two-dimensional code on fuel gas cylinders and fuel gas cylinder valves
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 45439-2025 | English | 359 |
Add to Cart
|
4 days [Need to translate]
|
Technical specification for the application of traceability two-dimensional code on fuel gas cylinders and fuel gas cylinder valves
| Valid |
GB/T 45439-2025
|
PDF similar to GB/T 45439-2025
Basic data | Standard ID | GB/T 45439-2025 (GB/T45439-2025) | | Description (Translated English) | Technical specification for the application of traceability two-dimensional code on fuel gas cylinders and fuel gas cylinder valves | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J74 | | Classification of International Standard | 23.020.30 | | Word Count Estimation | 18,118 | | Date of Issue | 2025-02-28 | | Date of Implementation | 2025-06-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 45439-2025: Technical specification for the application of traceability two-dimensional code on fuel gas cylinders and fuel gas cylinder valves
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
GB/T 45439-2025 English version. Technical specification for the application of traceability two-dimensional code on fuel gas cylinders and fuel gas cylinder valves
ICS 23.020.30
CCSJ74
National Standard of the People's Republic of China
Gas cylinder and gas cylinder valve traceability QR code
Application Specifications
Technical specification for the application of traceability two-dimensional code
Released on 2025-02-28
2025-06-01 Implementation
State Administration for Market Regulation
The National Standardization Administration issued
Table of Contents
Preface III
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Requirement 2
5 Traceability identification test method 5
6 Traceability Mark Inspection Rules 6
Appendix A (Normative) Gas Cylinder Manufacturing File Data 7
Appendix B (Normative) Gas Cylinder Valve Manufacturing File Data 8
Appendix C (Informative) Hyperlink jump service for gas cylinder full process and full life cycle traceability application 9
Appendix D (Informative) Method for connecting the manufacturing archive data of gas cylinders and gas cylinder valves 10
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents"
Drafting.
Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.
This document is proposed and coordinated by the National Technical Committee for Standardization of Gas Cylinders (SAC/TC31).
This document was drafted by. Jiangsu Xiangkang Technology Co., Ltd., Duoliheng (Beijing) Energy Technology Co., Ltd., Shanghai Special Equipment Supervision
Inspection Technology Research Institute, Wuzhou Wohua Machinery Co., Ltd., Yantai Special Equipment Inspection Institute, Shandong Telian Information Technology Co., Ltd.,
Qingdao Yidingli Container Co., Ltd., Jiangsu Minsheng Heavy Industry Co., Ltd., Zhejiang Mintai Cylinder Co., Ltd., Zhejiang Yitian Cylinder Co., Ltd.,
Shenzhen Aixin Network Energy Co., Ltd., Shenzhen Lanyang Technology Co., Ltd., Taishan Machinery Factory Co., Ltd., Hebei Baigong Industrial Co., Ltd.
Company, China Article Numbering Center, Beijing Tianhai Industrial Co., Ltd., Ningbo Jinjiajia Valve Co., Ltd., Jiangsu Special Equipment Supervision and Inspection
Research Institute, Hangzhou Special Equipment Inspection Science Research Institute (Hangzhou Special Equipment Emergency Disposal Center), Huzhou Market Supervision and Administration Bureau (Huzhou
State Intellectual Property Office).
The main drafters of this document are. Shi Zhifeng, Du Yongfang, Xu Weipu, Liao Haochen, Li Qi, Liu Yunjie, Teng Haokun, Ni Fei, Yan Weihua, Zhu Hongbo,
Shoulong Xu, Zhongyu Mao, Shengjian Wang, Can Yan, Bin Li, Yifeng Chen, Weifeng Liu, Jianhua Li, Yanhui Wang, Jiahong Xu, Feng Xu, Fei Wang, Yongxiang Cheng.
Gas cylinder and gas cylinder valve traceability QR code
Application Specifications
1 Scope
This document specifies the identification requirements, test methods, inspection rules and basic principles of the traceability system for gas cylinders and gas cylinder valves.
Require.
This document applies to the traceability QR code identification of gas cylinders and gas cylinder valves, as well as the design,
Manufacturing, construction, application, maintenance and management.
2 Normative references
The contents of the following documents constitute essential clauses of this document through normative references in this document.
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to
This document.
GB 5842-2023 Liquefied petroleum gas cylinders
GB/T 6739 Paints and varnishes - Determination of film hardness by pencil method
GB 7512 Liquefied petroleum gas cylinder valve
GB/T 13005 Gas Cylinder Terminology
GB/T 18284 Quick Response Matrix Code
GB/T 18347 128 barcode
GB/T 21049 Chinese Xin Code
GB/T 22240-2020 Information security technology - Guidelines for classification of cybersecurity protection levels
GB/T 33146 Liquefied dimethyl ether cylinder valve
GB/T 33147 Liquefied dimethyl ether cylinders
GB/T 35208 Self-closing liquefied petroleum gas cylinder valve
GB/T 36373.1 Special equipment information resource management data element specification Part 1.Gas cylinders
GB/T 43072 Implementation Guidelines for the Construction of Gas Cylinder Traceability System
GB/T 43616 Basic requirements for gas cylinder informatization
TSG23 Gas Cylinder Safety Technical Regulations
3 Terms and definitions
The terms and definitions defined in GB/T 13005 and GB/T 43616 and the following apply to this document.
3.1
fuelgascylinder
Gas cylinders containing liquefied petroleum gas, liquefied dimethyl ether and other civilian fuel gases.
3.2
fuelgascylindervalve
A bottle valve installed on a gas cylinder to control the opening and closing of the medium.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 45439-2025_English be delivered?Answer: Upon your order, we will start to translate GB/T 45439-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 45439-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 45439-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|