|
US$114.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 39742-2021: Plain bearings - Aluminum alloys for solid bearings
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 39742-2021 | English | 114 |
Add to Cart
|
3 days [Need to translate]
|
Plain bearings - Aluminum alloys for solid bearings
| Valid |
GB/T 39742-2021
|
PDF similar to GB/T 39742-2021
Basic data | Standard ID | GB/T 39742-2021 (GB/T39742-2021) | | Description (Translated English) | Plain bearings - Aluminum alloys for solid bearings | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J12 | | Word Count Estimation | 6,639 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 39742-2021: Plain bearings - Aluminum alloys for solid bearings---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Plain bearings - Aluminum alloys for solid bearings
ICS 21.100.10
J12
National Standards of People's Republic of China
Aluminum-based casting alloys for single-layer sliding bearings
(ISO 6279.2017, IDT)
Released on 2021-03-09
2021-10-01 implementation
State Administration of Market Supervision and Administration
Issued by the National Standardization Management Committee
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
The translation method used in this standard is equivalent to ISO 6279.2017 "Aluminum-based casting alloys for single-layer sliding bearings of sliding bearings".
This standard was proposed by the China Machinery Industry Federation.
This standard is under the jurisdiction of the National Sliding Bearing Standardization Technical Committee (SAC/TC236).
Drafting organizations of this standard. China Machinery Productivity Promotion Center, Changzhou Hengye Bearing Material Co., Ltd., Hefei Bolin New Material Co., Ltd.
Division, Shanghai Hewei Industrial Co., Ltd., Jinhua Chengkai Alloy Material Co., Ltd., Zhejiang Zhongda Precision Components Co., Ltd., Hunan Chongde
Industrial Technology Co., Ltd., Lin'an Dongfang Sliding Bearing Co., Ltd., Hunan UFO New Material Co., Ltd.
This standard is interpreted by the National Standardization Technical Committee for Sliding Bearings.
Aluminum-based casting alloys for single-layer sliding bearings
1 Scope
This standard specifies the chemical composition and mechanical properties of aluminum-based casting alloys that are preferred for single-layer sliding bearings. The manufacturer and user agreement
Quotient, other alloys can also be used.
2 Normative references
The following documents are indispensable for the use of this document. For dated reference documents, only the dated version applies to this article
Pieces. For undated reference documents, the latest version (including all amendments) is applicable to this document.
ISO 4384-2 Plainbearings-Hardnesstes-Hardnesstest of bearing alloys Part 2.Single-layer materials (Plainbearings-Hardnesstes-
tingofbearingmetals-Part 2.Solidmaterials)
3 Chemical composition and mechanical properties
3.1 Chemical composition
The recommended chemical composition is shown in Table 1.
The chemical composition analysis method is negotiated between the manufacturer and the user.
3.2 Mechanical properties
The mechanical properties are shown in Table 1.
Tensile strength and elongation are mandatory items, and quality control inspections are carried out by the material manufacturer.
Hardness is also a required inspection item and can be tested on a single bearing.
The values of other properties are for reference only during design.
4 Detection method
The tensile test shall be carried out in consultation between the manufacturer and the user.
The inspection method and the indicators of the required inspection items shall be negotiated by the manufacturer and the user.
Hardness testing should be carried out in accordance with ISO 4384-2.
Table 1 Aluminum-based alloys
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 39742-2021_English be delivered?Answer: Upon your order, we will start to translate GB/T 39742-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 39742-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 39742-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|