|
US$134.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 39697.1-2020: Rubber or plastics covered rollers - Specifications - Part 1: Requirements for hardness
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 39697.1-2020 | English | 134 |
Add to Cart
|
3 days [Need to translate]
|
Rubber or plastics covered rollers - Specifications - Part 1: Requirements for hardness
| Valid |
GB/T 39697.1-2020
|
PDF similar to GB/T 39697.1-2020
Basic data | Standard ID | GB/T 39697.1-2020 (GB/T39697.1-2020) | | Description (Translated English) | Rubber or plastics covered rollers - Specifications - Part 1: Requirements for hardness | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | G47 | | Classification of International Standard | 83.140.99 | | Word Count Estimation | 7,775 | | Date of Issue | 2020-12-14 | | Date of Implementation | 2021-11-01 | | Quoted Standard | ISO 48-6; ISO 48-7; ISO 48-8; ISO 23529 | | Adopted Standard | ISO 6123-1-2015, IDT | | Regulation (derived from) | National Standard Announcement No. 28 of 2020 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | | Summary | This standard specifies the requirements for the hardness of rubber or plastic coated rolls. | GB/T 39697.1-2020: Rubber or plastics covered rollers - Specifications - Part 1: Requirements for hardness
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Rubber or plastic coated rollers Specification Part 1: Hardness requirements)
ICS 83:140:99
G47
National Standards of People's Republic of China
Specification for rubber or plastic coated rollers
Part 1: Hardness requirements
2020-12-14 release
2021-11-01 implementation
State Administration for Market Regulation
Issued by the National Standardization Management Committee
Foreword
GB/T 39697 "Rubber or plastic coated roller specifications" is divided into 3 parts:
---Part 1: Hardness requirements;
---Part 2: Surface characteristics;
---Part 3: Dimensional tolerance:
This part is Part 1 of GB/T 39697:
This section was drafted in accordance with the rules given in GB/T 1:1-2009:
The translation method used in this section is equivalent to ISO 6123-1:2015 "Rubber or Plastic Covered Roll Specification Part 1: Hardness Requirements":
For ease of use, this section has also made the following editorial changes:
--- Replace ISO 7267-1 with ISO 48-6;
--- Replace ISO 7267-2 with ISO 48-7;
--- Replace ISO 7267-3 with ISO 48-8:
This part was proposed by the China Petroleum and Chemical Industry Federation:
This part is organized by the National Rubber and Rubber Products Standardization Technical Committee Rubber Miscellaneous Technical Committee (SAC/TC35/SC7)
Focus:
Drafting organizations of this section: Zhejiang Zhengrong Roll Co:, Ltd:, Nanjing Shengqiang Rubber Co:, Ltd:, Hebei Chunfeng Yinxing Rubber Roll Co:, Ltd:
Company, Hebei Tongchang Rubber Roller Co:, Ltd:, Nanjing Dongrun Special Rubber Co:, Ltd:, Zhejiang Fuming Industrial Machinery Co:, Ltd:
The main drafters of this section: Qiu Zheng, Xu Jing, Lin Hongyun, Sun Hongliang, Li Guoshui, Jiang Wenyang, Wang Yiyu:
Introduction
Rubber or plastic coated rollers are usually made of cylindrical metal roller cores covered with rubber or plastic, and can be made into various
Size and hardness level:
Specification for rubber or plastic coated rollers
Part 1: Hardness requirements
1 Scope
This part of GB/T 39697 specifies the hardness requirements of rubber or plastic coated rolls:
2 Normative references
The following documents are indispensable for the application of this document: For dated reference documents, only the dated version applies to this document:
For undated references, the latest version (including all amendments) applies to this document:
ISO 48-6: Determination of hardness of vulcanized rubber or thermoplastic rubber: Part 6: Determination of apparent hardness of rubber rollers by IRHD method
3 Hardness requirements
After consultation between the parties concerned, one of the following hardness can be selected as the hardness of the rubber or plastic coated roller:
a) International Rubber Hardness (IRHD);
b) Shore hardness (Shore A or Shore D);
c) Zhao's hardness (P
Since the hardness will be affected by temperature, the operating temperature of the coated roll should be specified if necessary:
International Rubber Hardness (IRHD), Shore Hardness and Zhao Hardness (P
International rubber hardness and Shore A hardness are equivalent: If medium accuracy is required, it is allowed to use Shore A hardness tester instead of international rubber hardness
However, it should be noted that due to different reading intervals, the results are not the same:
Note 1: For all manually operated hardness testers, the measurement results will be different due to different operators: Use the international rubber hardness tester or Zhao's hardness tester:
As a result, it is affected by the loading speed and whether the applied force is vertical: Using a spring-loaded Shore hardness tester, the result is more significantly affected by the pressure:
Note 2: Since the hardness is measured by indentation, the thickness of the rubber or plastic coating will affect the hardness reading: Hardness measured on the cover of the cover roll
The real hardness of the coating layer under standard laboratory conditions and the actual hardness of the coating layer are comparable only when the coating layer thickness is as follows:
a) International Rubber Hardness (IRHD):
The hardness is less than or equal to 50IRHD, and the thickness of the coating layer is not less than 9mm;
The hardness is greater than 50IRHD, and the coating thickness is not less than 6mm:
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 39697.1-2020_English be delivered?Answer: Upon your order, we will start to translate GB/T 39697.1-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 39697.1-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 39697.1-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|