|
US$329.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 21564.3-2008: Message formats and protocols for serial data interfaces in alarm transmission systems -- Part 3: Common data link layer protocol
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 21564.3-2008 | English | 329 |
Add to Cart
|
3 days [Need to translate]
|
Message formats and protocols for serial data interfaces in alarm transmission systems -- Part 3: Common data link layer protocol
| Valid |
GB/T 21564.3-2008
|
PDF similar to GB/T 21564.3-2008
Basic data | Standard ID | GB/T 21564.3-2008 (GB/T21564.3-2008) | | Description (Translated English) | Message formats and protocols for serial data interfaces in alarm transmission systems -- Part 3: Common data link layer protocol | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | A91 | | Classification of International Standard | 13.320 | | Word Count Estimation | 14,193 | | Date of Issue | 2008-03-24 | | Date of Implementation | 2008-09-01 | | Quoted Standard | GB/T 21564.1-2008; GA/T 600.1-2006 | | Adopted Standard | IEC 60839-7-3-2001, MOD | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 5, 2008 (No. 118 overall) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the transmission system when the alarm transmission network does not provide a standard protocol, the standard serial data interface to be used by the data link layer information structure, format, and transfer process, ensuring that devices from different vendors compatibility between sex. This section applies to the transmission of alarm messages and sent to/from intrusion, fire, access control and social alarm systems and other information transmission, and sent to/from other similar information transmission systems. The only part of a serial data communication, for example, to a host and one or more slaves between simple query response algorithm based instructions. The protocol supports point- to-multipoint operation. Does not support multipoint between operations, but support for a simple router from the host machine to the transfer of information between the slave. This agreement to comply with the recommendations of OSI layered protocol to allow the physical layer application flexibility. | GB/T 21564.3-2008: Message formats and protocols for serial data interfaces in alarm transmission systems -- Part 3: Common data link layer protocol
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Message formats and protocols for serial data interfaces in alarm transmission systems.Part 3. Common data link layer protocol
ICS 13.320
A91
National Standards of People's Republic of China
Alarm transmission system for serial data interfaces
Message formats and protocols
Part 3. Common data link layer protocol
(IEC 60839-7-3.2001Alarmsystems-Part 7-3. Messageformatsand
Commondatalinklayerprotocol, MOD)
Posted 2008-03-24 2008-09-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
Introduction Ⅳ
1 Scope 1
2 Normative references 1
3 Terms and definitions
4 Abbreviations 1
5 Overview 1
6 a data block Data Link
7 basic transmission protocol 2
Appendix A (normative) data link data block type 7
Foreword
GB/T 21564 "for serial data interfaces in alarm transmission systems of information formats and protocols" is divided into five parts.
--- Part 1. General;
--- Part 2. Common application layer protocol;
--- Part 3. Common data link layer protocol;
--- Part 4. Public transport layer protocol;
--- Part 5. data interfaces.
This section GB/T 21564 Part 3.
The partial modification adopts the International Electrotechnical Commission IEC 60839-7-3.2001 (in English).
For ease of use, this section made the following changes.
--- On the "restart time" to increase the annotation, easy to understand and use;
--- For "Master Slave Initialization" Note added, suggesting that it plays a major role model;
--- Remove the original IEC foreword, an increase of introduction.
This section of Appendix A normative appendix.
This part of the National Security Alarm System Standardization Technical Committee (SAC/TC100) and proposed centralized.
This section drafted by. China University of Mining (Beijing) Information and Electrical Department, SAC/TC100 Secretariat, Hubei Dongrun Technology Co., Ltd., Beijing
Univision Aegis Security Technology Co., Ltd.
The main drafters of this section. Wang Rulin, Liu Xiqing, Tangsheng Nan, Jin Wei, Jin Zhou, Tong Zhu Bin, Yang Guosheng.
Introduction
Serial data communication is the main variety of communication model manifestations.
This section is based on the earlier point RS-232 and RS-485 communication model multipoint serial communication bus model developed
of. Therefore, broadband applications and wireless transmission is currently being widely used not been detailed presentation, only in some links and comments given
prompt.
Although the communication rate model This section gives slower, but the data transfer control theory and modern types of broadband applications and wireless applications
Use is the same, so this part has a very good guide for alarm product designers, planners user alarm systems and alarm systems, etc.
The role and significance of the demonstration.
By the ITU-TV. 24 and ITU-TV. 28 provisions of the common interface, it is currently familiar EIA-RS232 interface, which is suitable
For synchronous and asynchronous serial binary data exchange system, the interconnection between data terminal equipment serial interface protocol is an unbalanced
Duplex digital baseband communication interface. The interface is mainly applied to low transmission rate, transmission distance close to the case.
By the ISO /IEC 8482.1993 specified interfaces, it is currently familiar EIA-RS485 interface, which is also applicable for synchronous and
Asynchronous serial binary data exchange system, the interconnection between data terminal equipment serial interface protocol. But it is a balanced (differential
Type) half duplex digital baseband communication interface. The interface can support more distant communication, and may support time division multiplexed bus type communication between machines
Communications.
By the ITU-TV. Interface 23 definition, is a similar serial communication interface specification EIA-RS232 duplex digital modulation band access
mouth. It can be used on more distant point to point communication telephone system.
In this section, the originator of the communication is defined alarm host, alarm responder communication is defined as a slave. It differs from the alarm system
Concepts. Alarm systems, alarms and alarm from the host machine is mainly from a management point of view to illustrate the significance of its existence. As part of this
Be sure to distinguish between the two users the appropriate concept similarities and differences. in the alarm system, a warning alarm from the machine either as a host of the respondents from
Alarm transmission system from the machine, but it also can be connected to the lower bus alarms and alarm from the machine to the next level and become an alarm transmission systems
Host. Other concepts have a similar situation, please pay attention to discrimination in order to avoid confusion.
As one of the important technical indicators alarm system --- alarm response time is clearly defined in other related standards. This section is no longer
Make this new definition, but it is recommended users to understand the alarm event to occur between the terminal device receives and displays information about alarms, or
Local people's duty to obtain the time interval between the alarm as an alarm response time test basis. Since the transmission of alarm transmission systems
Lose one alarm response time delay is an important aspect, so this part of the recommendation of the user of this part of the transmission system can transmit alarm
Force given proper assessment to ensure the realization of the final system specifications.
Serial data communication There are many ways, such as wired and wireless (local area private network, WLAN, public -GSM, CDMA, etc.) mode, low-speed and
High-speed (xDSL) mode, low to high interference immunity (CANBUS) way, one-way communication and two-way communication (CANBUS, LON-
WORKS and Ethernet) mode and so on. This part digital baseband communications mode at low speed and anti-jamming hardware model to a master
Machine with one or more machines from a simple query response between the protocols described algorithm based alarm transmission systems serial data communications. this agreement
It supports point-to-multipoint operation. It does not support multi-point operation between, but simple router to support host-slave to slave
Information transfer between.
Alarm transmission system for serial data interfaces
Message formats and protocols
Part 3. Common data link layer protocol
1 Scope
This section GB/T 21564 specifies the alarm when the transmission network transmission system does not provide a standard protocol, the standard serial data
The data link layer information structure, format and transmission interface should be used, so you can ensure compatibility between different vendors' equipment.
This section applies to the transmission of alarm messages sent to and/additional information from intrusion, fire, access control and alarm system of social
Transmission, and to/from the transmission of information to other similar systems.
The only part of a serial data communication, for example, to a host with one or more machines from a simple query response algorithm between the groups
Description foundation. The protocol supports point-to-multipoint operation. It does not support multi-point operation between the host but supports a simple route
The transmission of information from the machine to a slave.
This agreement comply with the recommendations of the OSI layer protocol to allow flexibility in the physical layer applications.
2 Normative references
The following documents contain provisions which, through reference GB/T 21564 in this section constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this
section.
GB/T 21564.1-2008 serial data interfaces in alarm transmission systems of information formats and protocols - Part 1. General
(IEC 60839-7-1.2001, MOD)
General requirements for systems (IEC 60839-5-1.. GA/T 600.1-2006 requirements for alarm transmission systems - Part 1 1991,
IDT)
3 Terms and Definitions
Terms and definitions GB/T 21564.1 established in this section apply to GB/T 21564 of.
4 Abbreviations
GB/T 21564.1 established abbreviations apply to this part of the GB/T 21564 of.
5 Overview
The basic protocol is used in the query response, the host only one. When there are multiple slave host the order of queries each slave.
Format the information to be transmitted into one or more data links of data blocks, transferred to a specified destination.
Each data link transmission data block must be clearly identified before the data block in the data transmission link next.
6 Data Link data block
Data link transmission information structure will be the following.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 21564.3-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 21564.3-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 21564.3-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 21564.3-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|