|
US$169.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 16722.3-2008: Technical product documentation -- Handling of computer-based technical information -- Phases in the product design process
Status: Valid GB/T 16722.3: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 16722.3-2008 | English | 169 |
Add to Cart
|
3 days [Need to translate]
|
Technical product documentation -- Handling of computer-based technical information -- Phases in the product design process
| Valid |
GB/T 16722.3-2008
|
| GB/T 16722.3-1996 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Technical product documentation--Handling of computer-based technical information--Phases in the product design process
| Obsolete |
GB/T 16722.3-1996
|
PDF similar to GB/T 16722.3-2008
Basic data | Standard ID | GB/T 16722.3-2008 (GB/T16722.3-2008) | | Description (Translated English) | Technical product documentation -- Handling of computer-based technical information -- Phases in the product design process | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J04 | | Classification of International Standard | 01.100.01 | | Word Count Estimation | 7,76 | | Date of Issue | 2009-01-01 | | Date of Implementation | 2009-01-01 | | Older Standard (superseded by this standard) | GB/T 16722.3-1996 | | Quoted Standard | GB/T 13361; GB/T 15751; GB/T 16722.1 | | Adopted Standard | ISO 11442-2006, NEQ | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 10 of 2008 (total 123) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the documents required to develop a new product design process guidelines. This section applies to computer-aided design (including units within and communication between units, quality assurance, acquisition and development of technology management system), manual design may be used. | GB/T 16722.3-2008: Technical product documentation -- Handling of computer-based technical information -- Phases in the product design process
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Technical product documentation. Handling of computer-based technical information. Phases in the product design process
ICS 01.100.01
J04
National Standards of People's Republic of China
Replacing GB/T 16722.3-1996
Technical product documentation
Computer Aided Technology Information Processing
Product design process state
(ISO 11442.2006, Technicalproductdocumentation-
Documentmanagement, NEQ)
Posted 2009-01-01 2009-01-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
In GB/T 16722 "Technical product documentation - computer-aided information processing technology" This general heading comprises the following four components.
--- GB/T 16722.1 Technical product documentation computer-aided technical information - Security requirements
--- GB/T 16722.2 Technical product documentation computer-aided technical information - Original documentation
--- GB/T 16722.3 Technical product documentation - computer-aided information processing technology product design process state
--- GB/T 16722.4 Technical product documentation computer-aided technical information - Document management and retrieval system
This section is based on the International Organization for Standardization ISO 11442.2006 "Technical Product File Management" in Chapter 5, "Design Files series
System work in all stages "and" typical rule "Annex A compiled file revision, revise the international standards on the use of technical content,
On a non-equivalent with consistency.
This Part replaces GB/T 16722.3-1996 "Technical product documentation - computer-aided information processing technology in the product design process
State ", the contents of the main changes are.
--- According to GB/T 1.1 and the requirements of this section, modify and increase the "scope" and content "Normative documents";
--- According to the International Organization for Standardization ISO 11442.2006 "Technical Product File Management" content, which increases the Chapter 5
"Product design" and "Appendix A typical rule file revisions" section, and the contents of Chapter 4 of Appendix A as a discharge
Included in this section;
--- Also, relevant content on standard text on the modifications made.
Appendix A of this section is an informative annex.
This part of the National Technical product documentation Standardization Technical Committee.
This part of the National Technical product documentation Standardization Technical Committee.
This section is drafted. the machine Productivity Promotion Center, Shaanxi Province Institute of Standardization, Chengdu Hang Lee (Group) Co., Ltd., Jilin
University of Technology, China Electronics Technology Group Corporation 28th Research Institute.
The main drafters of this section. Ding Hongyu, Hou Segovia, Cui Zhiyong, Xiaojiu Lin, Wang Xiuying, Zhang Hongqi.
This part of the standard replaces the previous editions are.
--- GB/T 16722.3-1996.
Technical product documentation
Computer Aided Technology Information Processing
Product design process state
1 Scope
This section GB/T 16722 specifies the new norm-setting process of the desired product design documents.
This section applies to computer-aided design (including the units and internal communication between units, quality assurance, acquisition and development of technology management
System), manual design may also be used.
2 Normative references
The following documents contain provisions which, through reference GB/T 16722 in this section constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this
section.
GB/T 13361 Technical Drawing generic term
GB/T 15751 Technical product documentation computer-aided design and drafting vocabulary (GB/T 15751-1995eqv ISO /T R
10623.1992)
GB/T 16722.1 Technical product documentation computer-aided technical information - Security requirements (GB/T 16722.1-2008,
ISO 11442-1.2006, NEQ)
3 Terms and Definitions
This part of GB/T 13361 definitions and GB/T 15751 in.
4 Product Design Process
4.1 editing stage product design documents
The following describes the generation of what documents and where the design cycle. Product development process can be divided into behavioral analysis, concept
Design, basic and detailed design, the following illustration (see Figure 1).
1 Product Development Process
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 16722.3-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 16722.3-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 16722.3-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 16722.3-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 16722.3-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 16722.3-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|