|
US$134.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 13566.1-2008: Fertilizers -- Determination of bulk density -- Part 1: Loose density
Status: Valid GB/T 13566.1: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 13566.1-2008 | English | 134 |
Add to Cart
|
3 days [Need to translate]
|
Fertilizers -- Determination of bulk density -- Part 1: Loose density
| Valid |
GB/T 13566.1-2008
|
| GB/T 13566-1992 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Determination of bulk density for fertilizers
| Obsolete |
GB/T 13566-1992
|
PDF similar to GB/T 13566.1-2008
Basic data | Standard ID | GB/T 13566.1-2008 (GB/T13566.1-2008) | | Description (Translated English) | Fertilizers -- Determination of bulk density -- Part 1: Loose density | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | G20 | | Classification of International Standard | 65.080 | | Word Count Estimation | 7,732 | | Date of Issue | 2008-12-31 | | Date of Implementation | 2009-08-01 | | Older Standard (superseded by this standard) | GB/T 13566-1992 | | Quoted Standard | ISO 7742-1988; ISO 8358-1991 | | Adopted Standard | ISO 3944-1992, IDT | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the method for the determination of solid fertilizers loose bulk density. This section applies only to a dry fertilizer, such as manure transport, storage process is hygroscopic, it must be dried prior to measuring environmental test chamber at a constant low humidity. This section does not apply powdered fertilizer, nor to contain a large number of particles greater than 5mm diameter fertilizer. | GB/T 13566.1-2008: Fertilizers -- Determination of bulk density -- Part 1: Loose density---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Fertilizers Determination of bulk density Part 1. Loose density
ICS 65.080
G20
National Standards of People's Republic of China
GB/T 13566.1-2008/ISO 3944.1992
Partially replace GB/T 13566-1992
Determination of bulk density of fertilizer
Part 1. Loose bulk density
[ISO 3944.1992, Fertilizers-Determinationofbulkdensity (loose), IDT]
Posted 2008-12-31
2009-08-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 13566 "fertilizer bulk density determination" is divided into two parts.
--- Part 1. Loose bulk density;
--- Part 2. tap bulk density.
This section is GB/T Part of 113,566.
This part identical with ISO 3944.1992 "--- fertilizer bulk density (loose) determination."
In order to meet China's national conditions, when this part of the adoption of international standards of editorial changes. The main difference between this part and the international standard is
Normative documents guiding pragmatic language instead of the corresponding national standards guiding international standards.
This part of the terms and provisions correspond to international standards.
For ease of use, this section also made the following editorial changes.
--- "This International Standard" be replaced by "GB/T 13566 this part" or "this part";
--- With a decimal point versus decimal comma ",". ",";
--- Deleted international standards foreword.
This Part replaces GB/T 13566-1992 "fertilizer bulk density determination" in part, GB/T 13566-1992 of fertilizer
Sign tight bulk density materials continue to be valid.
This section compared with the GB/T 13566-1992 main changes are as follows.
--- Standard name was changed to "Determination of bulk density of fertilizer - Part 1. Loose bulk density";
--- Remove the determination of bulk density of the tight shot of fertilizer;
--- Increased introduction;
--- Increased in Chapter 2, normative references;
--- Increased in Chapter 6 of the sample preparation;
--- Increased Chapter 9 test report.
This part is proposed by the China Petroleum and Chemical Industry Association.
This part of the National Standardization Technical Committee and soil conditioners Fertilizers (SAC/TC105) centralized.
This section drafted by. National Fertilizer Quality Supervision and Inspection Center (Shanghai), Hubei Yihua Chemical Industry Co., Ltd.
The main drafters of this section. Zhang truth, Ji Min, Bianping Guan.
GB/T 13566 was first released in 1992.
GB/T 13566.1-2008/ISO 3944.1992
Introduction
Loose bulk density of fertilizer and tapped bulk density is to provide relevant information on the fertilizer packaging material, warehouse, repository size requirements. through
Often tapped bulk density loose bulk density ratio of 10%, sometimes more than this value. Both depend on the actual density, particle shape and fertilizer
size.
Loose bulk density fertilizer in practice can be used to calculate the maximum volume of a given mass of fertilizer, manure given share of real quality
Interpersonal volume generally is calculated within a loose pile density, and tap bulk density range.
GB/T 13566.1-2008/ISO 3944.1992
Determination of bulk density of fertilizer
Part 1. Loose bulk density
1 Scope
GB/T 13566 provisions of this part of the determination of solid fertilizer loose bulk density.
This section applies only in dry fertilizer, such as manure in the transport, storage process is hygroscopic, it must be measured before at a constant low humidity
Environmental test chamber and dried.
This section does not apply to powdery fertilizer, it does not apply to a particle size greater than 5mm particles containing a large amount of fertilizer.
2 Normative references
The following documents contain provisions which, through reference GB/T 13566 in this section constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this
section.
ISO 7742. 1988 Solid fertilizers --- reduction of sub-samples
ISO 8358.1991 Solid fertilizers --- chemical analysis and physical analysis sample preparation
3 Terms and Definitions
The following terms and definitions apply to this section.
3.1
After under clearly defined conditions, solid fertilizers poured through the free flow of container, the unit volume of the fertilizer quality. Fertilizer loose bulk density
Grams per cubic centimeter (g/cm3) represents.
Principle 4
By specifying the sample was poured into the funnel specified measuring cylinder of known volume, and then weighing the sample measuring cylinder.
5 Instruments
5.1 Balance. Sensitivity 1g;
5.2 Determination of loose bulk density means. the approximate dimensions shown in Figure 1, from the following components.
5.2.1 movable measuring tube. no mouth, its capacity should be measured in advance, accurate to 1cm3;
NOTE. Determination of loose bulk density of the components of the apparatus to be in contact with the fertilizer, it is appropriate corrosion-resistant material (such as glass, plastic, etc.) is made.
5.2.2 bracket funnel.
5.3 blade, approximate dimensions of 120mm × 20mm, or other suitable means.
Prepare 6 samples
Sample preparation according to ISO 7742 and ISO 8358 methods to ensure adequate sample replicates.
Step 7
Do two parallel determination of sample.
GB/T 13566.1-2008/ISO 3944.1992
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 13566.1-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 13566.1-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 13566.1-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 13566.1-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 13566.1-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 13566.1-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|