HOME   Cart(12)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

GB/T 10432.1-2010 English PDF

US$209.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 10432.1-2010: Unthreaded studs for drawn arc stud welding with ceramic ferrule
Status: Valid

GB/T 10432.1: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 10432.1-2010English209 Add to Cart 3 days [Need to translate] Unthreaded studs for drawn arc stud welding with ceramic ferrule Valid GB/T 10432.1-2010
GB/T 10432-1989English199 Add to Cart 2 days [Need to translate] Headless studs for stud welding Obsolete GB/T 10432-1989

PDF similar to GB/T 10432.1-2010


Standard similar to GB/T 10432.1-2010

GB/T 9074.32   GB/T 9074.31   GB/T 9074.18   GB/T 10433   GB/T 10432.2   GB/T 10432.3   

Basic data

Standard ID GB/T 10432.1-2010 (GB/T10432.1-2010)
Description (Translated English) Unthreaded studs for drawn arc stud welding with ceramic ferrule
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard J13
Classification of International Standard 21.060.10
Word Count Estimation 9,950
Date of Issue 1/10/2011
Date of Implementation 10/1/2011
Quoted Standard GB/T 90.1; GB/T 90.2; GB/T 1237; GB/T 3098.1; GB/T 3098.6; GB/T 3103.1
Adopted Standard ISO 13918-2008; MOD
Regulation (derived from) Announcement of Newly Approved National Standards 2011 No. (No. 166 overall) 1
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This Standard specifies a nominal diameter of 6mm - 16 mm of arc welding stud welding with headless nails, and supporting the use of the ring. Product type and requirements of the standard IS0 13918 controls, see Appendix A.

GB/T 10432.1-2010: Unthreaded studs for drawn arc stud welding with ceramic ferrule

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Unthreaded studs for drawn arc stud welding with ceramic ferrule ICS 21.060.10 J13 National Standards of People's Republic of China Arc stud welding of the headless studs (ISO 13918.2008, Welding-Studsandceramic ferrulesforarcstudwelding, MOD) Issued on. 2011-01-10 2011-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This section GB/T 10432 (hereinafter referred to in this section) is one of the national standard "stud welding and welding nails" product series standards, the department Columns include. --- GB/T 902.1-2008 manual welding with welding studs; --- GB/T 902.2-2010 stud welding arc stud welding; --- GB/T 902.3-2008 discharge welding welding studs; --- GB/T 902.4-2010 short cycle stud welding arc stud welding; --- GB/T 10432.2-2010 short cycle stud welding arc welding with headless nails; --- GB/T 10432.3-2010 discharge welding of the headless studs; --- GB/T 10433-2002 arc stud welding with welding cylinder head nails. This part of GB/T 10432 Part 1. The partial modification of the use of ISO 13918.2008 "with the stud welding arc stud welding and magnetic" provides non-threaded studs (UD type) (In English). This part of ISO 13918.2008 without threaded studs (UD type) the main changes are as follows. --- ISO 13918 certification provisions covering products, market access for testing and factory production control, and ISO /TC2 developed Fastener different product standards, there are also quite different from the actual situation of our country, so were not used; --- In the reference file, instead of using our standards with international standards (Chapter 2); --- ISO 13918 does not provide packaging technology requirements in this section shall be specified (see Table 3); --- ISO 13918 does not provide for a simplified mark, according to this part of GB/T 1237 presents a simplified markup (see 6.1.2). This section in Appendix A and Appendix B is an informative annex. This part is proposed by China Machinery Industry Federation. This part of the National Standardization Technical Committee fasteners (SAC/TC85) centralized. This section is responsible for drafting unit. Productivity Promotion Center in the machine. Participated in the drafting of this section. Beijing Hongguang Electrical Equipment Factory, Ningbo Kowloon Fastener Manufacturing Co., Ltd. Arc stud welding of the headless studs

1 Scope

This section GB/T 10432 specifies the nominal diameter of 6mm ~ 16mm arc stud welding with headless studs (UD type) and distribution Magnetic ring sets used (UF type). Type of product standards ISO 13918 and control provisions, see Appendix A.

2 Normative references

The following documents contain provisions which, through reference GB/T 10432 in this section constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 90.1 fasteners acceptance inspection (GB/T 90.1-2002, idt ISO 3269.2000) GB/T 90.2 Fasteners marking and packaging GB/T 1237 fasteners labeling method (GB/T 1237-2000, eqv ISO 8991. 1986) GB/T 3098.1 Mechanical properties of fasteners Bolts, screws and studs (GB/T 3098.1-2010, ISO 898-1.2009, IDT) GB/T 3098.6 Mechanical properties of fasteners stainless steel bolts, screws and studs (GB/T 3098.6-2000, idt ISO 3506-1. 1997) GB/T 3103.1 Tolerances for fasteners - Bolts, screws, studs and nuts (GB/T 3103.1-2002, ISO 4759-1.2000, IDT)

3 Dimensions

3.1 General --- Weld length (l2) is the design value. Appropriately controlled welding to maintain l2 within ± 1mm. Under special conditions, such as penetration - loaded Accessories Stud Welding l2 may be different from the nominal value. --- No threaded stud (UD) tip should be fitted with press-fitted aluminum rod or aluminum coating. Diameter stainless steel studs and ≤10mm, and Inert gas welding of the case, this requirement may be omitted. After welding size --- Figure 1 shows the reference value. --- A) of Figure 1 is not specified dimensions and tolerances, determined by the manufacturer. This also applies to the shape of the stud welding position changes, Such as drilling and slotting not affect the weldability. D7 --- bead diameter is the main factor affecting the quality of welding; changes in other dimensions without impairing the quality of welding. --- Headless studs (UD type) quality, see Appendix B. 3.2 headless studs (UD type) Headless studs (UD-type) type dimensions shown in Figure 1 and Table 1.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 10432.1-2010_English be delivered?

Answer: Upon your order, we will start to translate GB/T 10432.1-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 10432.1-2010_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 10432.1-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 10432.1-2010?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 10432.1-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.