|
US$169.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 10432.3-2010: Unthreaded studs for capacitor discharge welding
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 10432.3-2010 | English | 169 |
Add to Cart
|
3 days [Need to translate]
|
Unthreaded studs for capacitor discharge welding
| Valid |
GB/T 10432.3-2010
|
PDF similar to GB/T 10432.3-2010
Basic data | Standard ID | GB/T 10432.3-2010 (GB/T10432.3-2010) | | Description (Translated English) | Unthreaded studs for capacitor discharge welding | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J13 | | Classification of International Standard | 21.060.10 | | Word Count Estimation | 7,776 | | Date of Issue | 1/14/2011 | | Date of Implementation | 10/1/2011 | | Older Standard (superseded by this standard) | GB/T 10432-1989 | | Quoted Standard | GB/T 90.1; GB/T 90.2; GB/T 1237; GB/T 3098.1; GB/T 3098.6; GB/T 3098.10; GB/T 3103.1 | | Adopted Standard | ISO 13918-2008, MOD | | Regulation (derived from) | Announcement of Newly Approved National Standards 2011 No. (No. 166 overall) 1 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This Standard specifies the nominal diameter of 3mm ~ 6mm of discharge welding welding with headless nails (UT type). Product type and requirements of the standard ISO 13918 controls, see Appendix A. | GB/T 10432.3-2010: Unthreaded studs for capacitor discharge welding---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Unthreaded studs for capacitor discharge welding
ICS 21.060.10
J13
National Standards of People's Republic of China
Replacing GB/T 10432-1989
Discharge welding studs with headless
(ISO 13918.2008, Welding-Studsandceramicferrules
forarcstudwelding, MOD)
Issued on. 2011-01-10
2011-10-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This section GB/T 10432 (hereinafter referred to in this section) is one of the national standard "stud welding and welding nails" product series standards, the department
Columns include.
--- GB/T 902.1-2008 manual welding with welding studs;
--- GB/T 902.2-2010 stud welding arc stud welding;
--- GB/T 902.3-2008 discharge welding welding studs;
--- GB/T 902.4-2010 short cycle stud welding arc stud welding;
--- GB/T 10432.1-2010 arc stud welding with no head studs;
--- GB/T 10432.2-201 × short cycle stud welding arc welding with headless nails;
--- GB/T 10433-2002 arc stud welding with welding cylinder head nails.
The partial modification of the use of ISO 13918.2008 headless stud welding "welding arc stud welding studs and magnetic" provisions (UT type) (English
Chinese Version).
This part of ISO 13918.2008 headless studs (UT type) the main changes are as follows.
--- In the reference file, instead of using our standards with international standards (Chapter 2);
--- ISO 13918 does not provide packaging technology requirements in this section shall be specified (see Table 2);
--- ISO 13918 does not provide for a simplified mark, according to this part of GB/T 1237 presents a simplified markup example (see 5.2).
This Part replaces GB/T 10432-1989 "headless stud welding."
This section compared with the GB/T 10432-1989 main changes are as follows.
--- Increasing the preface;
--- Adjustment references (Chapter 2);
--- Adopt ISO 13918 in UT type headless studs, their type and size substantially the same as the old standard (Chapter 3);
--- Increase in stainless steel and non-ferrous metal studs, and provides performance rating. 4.8 carbon steel (carbon content should be less than equal to 0.18%, and
Shall not be used cutting steel), stainless steel A2-50 (cutting steel shall not be used), as well as non-ferrous metal is CU2 (see Table 2).
Appendix A of this section is an informative annex.
This part is proposed by China Machinery Industry Federation.
This part of the National Standardization Technical Committee fasteners (SAC/TC85) centralized.
This section is responsible for drafting unit. Productivity Promotion Center in the machine.
Participated in the drafting of this section. Beijing Hongguang Electrical Equipment Factory.
This part of the National Standardization Technical Committee Secretariat responsible for the interpretation of fasteners.
This part of the standard replaces the previous editions are.
--- GB/T 10432-1989.
Discharge welding studs with headless
1 Scope
This section GB/T 10432 specifies the nominal diameter of 3mm ~ 6mm of discharge welding of the headless studs (UT type).
Type of product standards ISO 13918 and control provisions, see Appendix A.
2 Normative references
The following documents contain provisions which, through reference GB/T 10432 in this section constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this
section.
GB/T 90.1 fasteners acceptance inspection (GB/T 90.1-2002, idt ISO 3269.2000)
GB/T 90.2 Fasteners marking and packaging
GB/T 1237 fasteners labeling method (GB/T 1237-2000, eqv ISO 8991. 1986)
GB/T 3098.1 Mechanical properties of fasteners Bolts, screws and studs (GB/T 3098.1-2010, ISO 898-1.2009, IDT)
GB/T 3098.6 Mechanical properties of fasteners stainless steel bolts, screws and studs (GB/T 3098.6-2000, idt ISO 3506-1.
1997)
GB/T 3098.10 Mechanical properties of fasteners non-ferrous metal manufacturing bolts, screws, studs and nuts (GB/T 3098.10-
1993, eqv ISO 8839. 1986)
GB/T 3103.1 Tolerances for fasteners - Bolts, screws, studs and nuts (GB/T 3103.1-2002, ISO 4759-1.2000,
IDT)
3 Dimensions
3.1 General
--- Weld length (l2) is the design value. Appropriately controlled welding to maintain l2 within ± 1mm. Under special conditions, such as penetration - loaded
Accessories Stud Welding l2 may be different from the nominal value.
After welding size --- Figure 1 shows the reference value.
--- A) of Figure 1 is not specified dimensions and tolerances, determined by the manufacturer. This also applies to the shape of the stud welding position changes,
Such as drilling and slotting not affect the weldability.
3.2 headless studs (UT type)
Headless studs (UT type) type dimensions shown in Figure 1 and Table 1.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 10432.3-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 10432.3-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 10432.3-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 10432.3-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|