FZ/T 01075: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| FZ/T 01075-2010 | English | 239 |
Add to Cart
|
3 days [Need to translate]
|
Inspection method for surface detects on garment interlinings
| Obsolete |
FZ/T 01075-2010
|
| FZ/T 01075-2000 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Regulations on stip labeling and length free of charge of local defects on interlinings for garments
| Obsolete |
FZ/T 01075-2000
|
| FZ/T 01075-1999 | English | RFQ |
ASK
|
3 days [Need to translate]
|
(Chinese Industry Standard)
| Obsolete |
FZ/T 01075-1999
|
PDF similar to FZ/T 01075-2010
Basic data | Standard ID | FZ/T 01075-2010 (FZ/T01075-2010) | | Description (Translated English) | Inspection method for surface detects on garment interlinings | | Sector / Industry | Spinning & Textile Industry Standard (Recommended) | | Classification of Chinese Standard | W10 | | Classification of International Standard | 59.080.01 | | Word Count Estimation | 6,659 | | Date of Issue | 2010-08-16 | | Date of Implementation | 2010-12-01 | | Older Standard (superseded by this standard) | FZ/T 01075-2000 | | Quoted Standard | GB/T 250; GB/T 250 | | Regulation (derived from) | Engineering (2010) No. 115 | | Issuing agency(ies) | Ministry of Industry and Information Technology of the People's Republic of China | | Summary | This standard specifies the appearance of clothing lining defects terms and definitions, inspection, testing methods, inspection reports. This standard applies to all kinds of material woven and knitted lining appearance defect inspection. This is also applicable to non -woven interlining test appearance defect. | FZ/T 01075-2010: Inspection method for surface detects on garment interlinings---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Inspection method for surface detects on garment interlinings
ICS 59.080.01
W10
People's Republic of China textile industry standards
Replacing FZ/T 01075-2000
Clothing lining appearance defect inspection method
Issued on. 2010-08-16
2010-12-01 implementation
Ministry of Industry and Information Technology of the People's Republic of China released
Foreword
This standard is a revision of FZ/T 01075-2000 "garment interlining appearance quality defects Locality knot braid and put foot rule".
Instead of the standard FZ/T 01075-2000, compared with FZ/T 01075-2000, the following main changes.
--- The standard name be changed to "clothing lining appearance defect inspection method";
--- Excess coating, the coating unevenness qualitative and quantitative specifications;
--- Remove the deep, in light of the definition, the definition of the increase taking powder;
--- Adjust test conditions prescribed standard defect put feet;
--- Increase testing methods disseminated defects, meter provision, Chapter 6 inspection reports;
--- Second product adjusted for qualified products.
The standard proposed by China Textile Industry Association.
This standard by the National Technical Committee of Standardization Technical Committee printing and dyeing cotton textiles (SAC/TC209/SC2) centralized.
This standard was drafted. Shanghai textile industry technical supervision, Weibosite lining (Nantong) Co., Ltd., Nantong Haihui Garment Accessories
Co., Ltd. Zhejiang Three of fusible interlining, China Textiles Industry Association, Shanghai Institute of clothing.
The main drafters. Zhang Baoqing, Shen Rong, Cao Ping, Yan Huarong, LI Gui-mei, Nieya Yuan, Zhao Lujiang.
This standard replaces the standards previously issued as follows.
--- GB/T 11393-1989;
--- FZ/T 01075-1999, FZ/T 01075-2000.
Clothing lining appearance defect inspection method
1 Scope
This standard specifies the terms and definitions clothing lining the appearance of defects, inspection, testing methods, inspection reports.
This standard applies to all kinds of materials and woven lining knit lining appearance defect inspection.
This standard also applies to non-woven interlining appearance defect inspection.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 250 textile color fastness test assessing change in color like the gray card
3 Terms and Definitions
The following terms and definitions apply to this standard.
3.1
Braided knot (or labeling) label
Braided knot defects (defects or labeling) for short, is the appearance of quality textile products at the time of inspection, the appearance of defects be marked (by threading or paste
Standard way) one way.
3.2
Put foot lengthtogive
Standard defects put feet short, also called grading refers to textile products and add up due to defect length.
3.3
Linear defect linedefect
Along by the (longitudinal) direction or weft (horizontal) to extend the width of not more than 0.3cm defects.
3.4
Strip defect stripdefect
Along by the (longitudinal) direction or weft (horizontal) to the extension of a width of more than 0.3cm (including bulk) defects.
3.5
Damaged damaging
Warp and weft (vertical and horizontal) to break two or more yarns or 0.2cm2 and above the hole and away from the edge of the broken edge over 2cm, 0.3cm above
Hop flowers.
3.6
Weaving defects weavingdefects
Fabric weaving defects caused by such double weft, weft shrinkage, thin dense road, weaving and other debris.
3.7
Packet seam overseam
In the production process, with the package seam sewing cloth connected.
|