HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (25 Oct 2025)

CCAP-C11-10-2014 English PDF

US$1199.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
CCAP-C11-10-2014: China Compulsory Certification Implementation Detailed-Rules - Vehicle door locks and door holder
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
CCAP-C11-10-2014English1199 Add to Cart 5 days [Need to translate] China Compulsory Certification Implementation Detailed-Rules - Vehicle door locks and door holder CCAP-C11-10-2014

PDF similar to CCAP-C11-10-2014


Standard similar to CCAP-C11-10-2014

CNCA-No10   CCAP-C11-04   CCAP-C11-09   CCAP-C11-16   CCAP-C11-03   CCAP-C11-02   

Basic data

Standard ID CCAP-C11-10-2014 (CCAP C11-10-2014)
Description (Translated English) China Compulsory Certification Implementation Detailed-Rules - Vehicle door locks and door holder
Sector / Industry China Certification Center for Automotive Products - CCC Implementation Detailed-Rules
Classification of Chinese Standard CCA
Word Count Estimation 30,390
Date of Issue 8/21/2014
Date of Implementation 1/1/2015
Summary This document specifies the China Compulsory Certification (CCC) implementation detailed-rules for Vehicle door locks and door holder. This document defines the Vehicle door locks and door holder's certification unit; certification entrusting; document re

CCAP-C11-10-2014: China Compulsory Certification Implementation Detailed-Rules - Vehicle door locks and door holder


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ID. CCAP-C11-10.2014 Mandatory product certification implementation rules Detailed Implementation Rules for China Compulsory Certification Car door locks and door holder Door latches and door retention components for motor vehicles Issued on. 2014-12-31 2015-01-01 implementation Steam Certification Center Document Number. CCAP-C11-10.2014 File name. mandatory product certification implementation rules car locks and doors holder first edition (modified code. 0) p. I, p. III total

table of Contents

0 Introduction ..1 0.1 Terms and Definitions .1 0.2 Production enterprise management requirements ..1 0.3 Manufacturer detect resource utilization requirements 3 1 Scope 3 2 Standards for Certification .4 Select 3 and related requirements for certification mode .4 3.1 car door locks and the door remains basic authentication mode member ..4 3.2 authentication mode applicability .4 4 Authentication unit divided .4 4.1 .4 Lock 4 4.2 Hinge 5 5 for Certification 5.1 Certification Process .. 5 Profile 5.2 certification commission 5 5.3 authentication and certification contract 6 6 Certification 7 6.1 Type test ..7 6.2 Initial factory inspection 8 6.3 Evaluation and Certification decision 10 10 6.4 Time frame for certification 6.5 Discontinued models repair parts .11 7-up inspection 11 Follow-up examination after ..11 7.1 certified 7.2 production site sample test or inspection 12 7.3 Market sampling test or examination 12 7.4 Frequency and time of follow-up inspection ..13 7.5 certified after supervision record ..13 After 7.6 up inspection 13 Evaluation of the results 8 certificate .13 Holding certificates 13 8.1 Content 8.2 Certificate 13 Change 8.3 Certificate 14 8.4 certificate cancellation, suspension and revocation 14 8.5 Use of certificates 14 9 certification marks .15 9.1 permit flag pattern used .15 9.2 requirements 15 10 charges .15 11 certification responsibilities ..15 Document Number. CCAP-C11-10.2014 File name. mandatory product certification implementation rules car locks and doors holder first edition (modified code. 0) Page II, III total pages 12 and technical disputes, complaints and appeals related processes and deadlines 15 Annex 1 car door locks and door holder Product Description .16 Accessories Product Description Table 1-1 car door locks .16 Annex 1-2 car door holder Product description ..17 Annex 2 car door locks and door retainer key parts/material Listing 18 Annex 3 type test according to the standard and the test items .19 Attachment 4 Conformity of Production control planning and execution reporting requirements ..20 Appendix 1 conformity of production control plan recommended format ..23 Annex 2 (informative) COP test/inspection items ..26 Document Number. CCAP-C11-10.2014 File name. mandatory product certification implementation rules car locks and doors holder first edition (modified code. 0) Page 1, total 25 0 Introduction To ensure the compulsory product certification specifications and effectiveness, based on "compulsory product certification and implementation rules - car door Lock and door holder "(CNCA-C11-10.2014) (hereinafter referred to as" Implementing Rules "), CNCA Compulsory Universal implementation of the rules, including "compulsory product certification and implementation rules production enterprise management, authentication mode and select the correct Fixed "(CNCA-00C-003)," Implementation Rules for Compulsory Certification testing resources and other manufacturers certified results Use "(CNCA-00C-004)," Implementation Rules for Compulsory Certification of factory quality assurance capability requirements " (CNCA-00C-005), "Compulsory Certification Implementation Rules factory inspection General requirements" (CNCA-00C-006) Steam and Certification Center (hereinafter referred to as CCAP) quality manual, procedures, work instructions, documentation, and make As "Implementing Rules" supporting documents, and the "Implementing Rules" common use. Scope of the Regulations, in accordance with relevant provisions of the certification and the "Implementing Rules" in consistent with the CNCA and hair Cloth change the CC C catalog, product certification and define the scope of adjustments and other announcements, and "Implementing Rules" synchronous transfer Whole implementation. 0.1 Terms and Definitions 0.1.1 the use of detection equipment manufacturers (referred TMP mode) By a designated laboratory engineer with factory laboratory testing equipment for testing, factory inspection staff should be sent Assisted by the relevant designated laboratory approval test report issued. 0.1.2 producers witnessed detection (abbreviated way WMT) Witnessed by a designated laboratory engineer factory laboratory conditions and factory laboratories use their own equipment to complete For all tests or test plan submitted factory, witnessed part of the test conditions and test items factory laboratory Responsible issued the original record, and specify the laboratory engineer and witness together the drafting of the test report format prescribed by Related designated laboratory approval test report issued. 0.2 Production enterprise management requirements CCAP obtained from various sources according to certified business related information, based on "compulsory product certification and implementation rules Production and enterprise management, authentication mode selection and determination "(CNCA-00C-003), the authentication enterprise risk assessment Price and classification, and adopt different management and risk control measures separately for different types of enterprises so as to ensure The validity of CC C certificates. CCAP certification assessment will classify management as A, B, C, D four categories. Document Number. CCAP-C11-10.2014 File name. mandatory product certification implementation rules car locks and doors holder first edition (modified code. 0) 2 Page of 25 Sources 0.2.1 Classification Management (1) factory inspection findings and inspection results (including the initial factory inspection, supervision and inspection and other special track inspection); (2) type testing and audit sampling test results (production site sampling or market sampling); (2) national, provincial quality supervision and special supervision CC C conclusions; Head (3) administrative supervision departments at all levels of government, law enforcement inspection and disposal of information; Credit record (4) business certification application, expanding items, changes such as the implementation and certification process of normative behavior record; (6) and the product quality certification and related application complaints, product recalls, all levels of government, society, media exposure And other public and social image of public opinion risk information; (7) other information. 0.2.2 certification classification principles Classification principles certification in Table 1. Table 1 certification classification principles Classification principles of classification 1 factory inspection (including. initial factory inspection, follow-up inspection after inspection) nearly 2 years found no major nonconformity Items and the impact or potential impact of product consistency nonconformity; After the 2-up inspection found no detected nonconformity, national, provincial types of product quality supervision and inspection results are "qualified"; 3 As necessary, companies need to have a good ability to independently design; detecting its own resources to obtain recognition ILAC Mutual Recognition Agreement Institutions may in accordance with ISO /IEC 17025 standard recognized qualification, or equivalent to meet the GB/T 27025 (ISO /IEC 17025) Chapter 5 technical competence requirements, the ability to detect the pilot project should cover all types of certified products; 4 supervision period, CC C certificate covering products maintained at a certain level; 5 good business reputation for quality certification process all credit records, no adverse record authentication codes of conduct; no effect on Shen corporate complaints and certified products on the market and no adverse reflection of public information. B other than Class A, Class C, Class D enterprises and other non-certified enterprise quality information business. Follow-up inspection to check the presence of an original or certified factory after severe nonconformity; or the presence of non-conformity in general, but conclusions Determination is required "field-proven"; 2 media exposure of product quality problems and the Department of corporate responsibility, but does not involve the suspension of revocation of the certificate; 3 CCAP based on information related to the results of a comprehensive evaluation of the company and that the certified products to be adjusted for the class C. 1 Initial factory inspection, follow-up inspection after inspection conclusions determined as "no-go" of; After the test results for the 2-up inspection of substandard safety items; national, provincial and other types of product quality supervision knot If the presence of the relevant mandatory product certification testing program "unqualified"; or unjustified refusal to factory inspection and / Or supervision of sampling; 3 due to product quality defect product recalls, media exposure and the Department of corporate responsibility, a greater impact on product safety, Direct suspended revoked certificates; 4 can not meet the other requirements of compulsory product certification has been suspended, revoked certificates; 5 CCAP based on information related to the results of a comprehensive evaluation of the company and that the certified products need to be adjusted as a Class D. 0.2.3 Evaluation and Classification Results CCAP will be before the annual follow-up inspection, the certified enterprise management level determination/adjustment information to inform the certified enterprises. CCAP will be based on all kinds of related information collection, combined with the classification principles relating to the production and enterprise management CCAP Regulation Document Number. CCAP-C11-10.2014 File name. mandatory product certification implementation rules car locks and doors holder first edition (modified code. 0) Page 3 of 25 Given to manufacturers to implement dynamic management, regular re-evaluation of the classification and classification adjustments, when certified companies appear When the impact of a risk assessment of major issues, CCAP will be ready to be transferred directly to the high-risk category of enterprises based on the evaluation results Do not. On the contrary, if the evidence leads to elements of risk has been effectively controlled, firm 2 years did not recur bad record, CCAP will also be the order of A → B → successive adjustments to the low-risk category according to D → C based on risk assessment situation. 0.3 requires producers to detect the use of resources 0.3.1 Scope After supervision applicable to certified sample testing and certification when supplemental change difference test. 0.3.2 implementation As manufacturers have "compulsory product certification and implementation rules, the company testing resources and other benefits of certification results With requirements "and certification requirements of the standard testing equipment and testing capabilities, client authentication, the producer or manufacturer to be identified Permit agencies to detect the use of company resources (hereinafter referred to as the factory laboratory) application, and self-examination would be self Junction Fruit and relevant information submitted with the application for certification bodies to review. Audit assessed by CCAP (designated organizations participating laboratories) comply Requirements plant laboratory before use company resources to implement detection TMP production site detection (or detection WMT). In order to reduce the burden on enterprises, in principle, CCAP not separate organization of the factory laboratory conducting audits, client authentication Review the application of the plant site testing laboratory may be filed concurrently with, or you can make a separate application, CCAP will Organization designated laboratories technical experts on-site verification, and save the corresponding audit assessment records. The audit team of the plant experiment After passing the examination room ability to take advantage of factory laboratory for testing. 0.3.3 maintain eligibility In principle, CCAP will combine supervision and annual inspection of the factory laboratories approved regular supervision of the verification, It will be organized, if necessary, to participate in the plant laboratory comparison test to ensure the validity of test results accurately. As manufacturers have needs with a single verification for authentication principal proposed project site inspection, verification result The site is only valid for the test items. Factory laboratories can no longer supervise the maintenance of eligibility. Furthermore with the project needs now When the field is detected, the application should be reviewed again.

1 Scope

These rules apply to. On (1) M1 and category N1 class vehicles for occupant side door out of the car (including sliding doors) or rear door locks; Guide for occupant out of the car side door or back door on the door hinge (2) M1 and N1 category vehicle category does not include a sliding door And other support member. Document Number. CCAP-C11-10.2014 File name. mandatory product certification implementation rules car locks and doors holder first edition (modified code. 0) Page 4 of 25

2 Standards for Certification

Performance requirements and test methods for member GB 15086-2013 car door and hold the door.

3 authentication mode selection and requirements

3.1 car door locks and the door remains basic authentication mode member Implementation of auto locks and doors holder mandatory certification of basic authentication mode. Initial type testing facility after checking up inspection After the above-mentioned basic authentication modes including track-up inspection after the inspection and supervision of certified sample testing in two ways, Which also includes supervision and sampling production site sample or to check and market sampling test or examination. 3.2 Applicability authentication mode CCAP will follow "certification enterprise management approach" requirements, based on the basic authentication mode on the increase, as appropriate / Authentication elements reducing composition, comprising. Class A. Follow-up inspection may be certified after the track inspection, production site sample or to check the market Sampling or to check one of three ways or a combination thereof. Class B, Class C, Class D Manufacturer. follow-up inspection should be used to track inspection and supervision of sampling (after the birth of the certified One of the production site sampling or market sampling or a combination). Discontinued models repair parts production business certification mode selection can be carried out in accordance with Annex 3 "Implementing Rules." CCAP certified products based on the principle of control and certification risk characteristics, combined with the results of the production of enterprise management, decision Certification can apply a given client authentication mode.

4 certification application unit

In principle, the same producer (manufacturer), the same company (place) there is no significant production in the following areas Differences car door locks and door products to maintain a certification unit. 4.1 Lock (1) and the lock catch (or stops) in the form of structure; Material (2) major components; (3) connected to the vehicle mode. 4.2 Hinge (1) the structure of the material in the form of door hinge and main components; Document Number. CCAP-C11-10.2014 File name. mandatory product certification implementation rules car locks and doors holder first edition (modified code. 0) Page 5 of 25 (2) the hinge pin (length to diameter) at a difference of within 20%. In principle, the certification commission of the certification should be made the principal basis of the principles of cell division. In the same cell can contain multiple "type Number (or specifications), "the product of the same model refers to the design of standards compliance does not affect products. With the same producer, different manufacturers produce the same product or different producers, manufacturers produce the same The same model can be considered only on a sample type test a unit, other manufacturers/producers of products to be Provide information on the consistency verification.

5 certified delegate

5.1 Certification Process (1) certification commission, data review and acceptance; (2) dividing certified product unit, the preparation of certification schemes; Signed and charges (3) certification of the contract; (4) type test; (5) Initial factory inspection; (6) Evaluation and approval of test results; (7) issuance of the certificates; (8) The Authority after certified. 5.2 Information for Certification The principal shall CCAP certification accreditation commission, commission of the certification information and technical materials to be submitted include. (1) Application for certification; (2) factory inspection questionnaire; (3) the principal certification, the producer (manufacturer), the manufacturer (factory) proof of registration material (initial application And when there is a change, please). A copy of a business license; b organization code certificate; c as the principal for the seller, the importer should be submitted sellers and producers, importers and production A copy of the relevant contract entered into by the (first application and change); d agent's power of attorney (when applicable); e certification for overseas clients, the need to provide the above information is true commitment letter and bear the corresponding legal responsibility (Including the "three guarantees", "recall" and related quality responsibilities) related documents. Document Number. CCAP-C11-10.2014 File name. mandatory product certification implementation rules car locks and doors holder first edition (modified code. 0) Page 6 of 25 (4) the quality system documentation, including. a quality manual, including. organizational chart and/or duty regulations; b quality assurance ability to control the file directory, should follow the "Implementing Rules" in Annex 2 of Appendix 1 to the relevant begging; c quality management system has been certified copy of the certificate (if any). (5) to keep car door locks and door products should meet the requirements described in "Implementing Rules" Annex 1, the declaration in accordance with the Annex 1 of this form for details; (6) a list of key components and raw materials, key components (materials) list should include the name of the key components, Model specifications and suppliers (manufacturers), see Annex 2 of this Rule; (The first time application and conformity of production control plan change) (7) conformity of production control plan, and asked to see the preparation Annex 4; (8) other enterprises commissioned the production of automotive locks and doors holder product, client authentication should also mention the CCAP Copy of the contract for the commissioned enterprises and enterprises entrusted made as client authentication, the producer (manufacturer Suppliers), entered into between the company's ODM/OEM agreement, power of attorney and ODM original CC C certificate copy Member (when applicable). 5.3 authentication and certification contract CCAP will review the application materials, such as application data need to supplement or improve, will communicate with the client, Supplementary requirements to submit relevant information in the data review is complete, the client will issue a notice admissible or inadmissible. After accepting, CCAP certification schemes will be developed based on the assessment results, include. (1) Authentication mode and the unit used is divided; (2) the type testing program; (including select OK designated laboratories); (3) factory inspection program and the time (person-days); (4) Estimated cost of certification; (5) It should be noted other matters and requirements. CCAP will notice the authentication scheme authentication principal, after communicating agreement, officially signed with the authentication client It provides certification contract, as the basis for this certification implementation. Document Number. CCAP-C11-10.2014 File name. mandatory product certification implementation rules car locks and doors holder first edition (modified code. 0) Page 7 of 25

6 Certification

6.1 Type tests 6.1.1 Type test program CCAP product testing programs will be developed after the data evaluation, test program includes all of the samples for type testing requirements and The number of testing standards and testing program, the principal may choose to specify certification laboratory information. 6.1.2 Type test sample request Principle on the sample type test certification by the principal to send samples to the designated laboratory for testing, if necessary also be CCAP program in accordance with the requirements of the type test sample for detection. Certification is only one type of unit to send this type of sample. Unit when more than one model, CCAP will Choose a model with a representative test for differences in other models when required. 6.1.2.1 Number of type test sample Lock type test samples for one unit type 4 sets. Hinge type test samples for one unit type 2 sets (upper and lower hinge 2 each paym...

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of CCAP-C11-10-2014_English be delivered?

Answer: Upon your order, we will start to translate CCAP-C11-10-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of CCAP-C11-10-2014_English with my colleagues?

Answer: Yes. The purchased PDF of CCAP-C11-10-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.