HOME   Cart(12)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

JJG 433-2004 English PDF

US$299.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
JJG 433-2004: Verification Regulation of Phase Comparators
Status: Valid

JJG 433: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
JJG 433-2004English299 Add to Cart 3 days [Need to translate] Verification Regulation of Phase Comparators Valid JJG 433-2004
JJG 433-1986English399 Add to Cart 3 days [Need to translate] Verification Regulation of Phase Comparator Obsolete JJG 433-1986

PDF similar to JJG 433-2004


Standard similar to JJG 433-2004

JJF 1234   JJF 1396   JJG 376   JJG 954   JJG 561   JJG 957   

Basic data

Standard ID JJG 433-2004 (JJG433-2004)
Description (Translated English) Verification Regulation of Phase Comparators
Sector / Industry Metrology & Measurement Industry Standard
Classification of Chinese Standard A56
Classification of International Standard 17.080
Word Count Estimation 11,125
Date of Issue 2004-11-09
Date of Implementation 2005-05-09
Older Standard (superseded by this standard) JJG 433-1986
Quoted Standard 2004 technical regulations issued by national metrology (industrial measurement 2005 Volume 15, Issue 1)
Regulation (derived from) 2004 technical regulations issued by national metrology (industrial measurement 2005 Volume 15, Issue 1)
Issuing agency(ies) State Administration of Quality Supervision, Inspection and Quarantine
Summary This standard applies to linear-phase meter than the initial verification and follow-up test and use test.

JJG 433-2004: Verification Regulation of Phase Comparators

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Verification Regulation of Phase Comparators National Metrology Verification Regulations of the People's Republic Ratio comparator Released on November 11,.2004 2005-05-09 implementation The General Administration of Quality Supervision, Inspection and Quarantine issued Specific phase calibration procedure ofPhaseComp Replace JJG 433-1986 This regulation was approved by the General Administration of Quality Supervision, Inspection and Quarantine on November 9,.2004, and It will take effect on May 9,.2005. Focal Point. National Time Frequency Measurement Technical Committee Main drafting unit. 203 of the Second Academy of Aerospace Science and Industry Participated in the drafting unit. China Institute of Metrology This procedure entrusts the National Time Frequency Measurement Technical Committee to explain The main drafters of this procedure. Xu Yueqing (2003 of the Second Academy of Aerospace Science and Industry Corporation) Jiang Dongwei (After the Second Academy of Aerospace Science and Industry Group) Participate in the drafters. Zhao Liangwei (China Institute of Metrology)

table of Contents

1 Scope (1) 2 Overview (1) 3 Metrological performance requirements (1) 3.1 Frequency range (1) 3.2 Input sensitivity (1) 3.3 Phase Drift (1) 3.4 Nonlinear (1) 3.5 Phase Detection Dead Zone (1) 4 General technical requirements (1) 4.1 Appearance and logo (1) 4.2 Other requirements (1) 5 measuring instrument control (1) 5.1 Verification conditions (1) 5.2 Verification items and verification methods (2) 5.3 Processing of verification results (4) 5.4 Verification cycle (4) Appendix A Verification Certificate and Verification Result Notice (inside page) format (5) Specific phase calibration procedure

1 Scope

This procedure applies to the first verification and subsequent verification and in-use inspection of linear phase contrast instruments.

2 Overview

Linear phase contrast meter is a special equipment for accurate measurement of time and frequency. The basic principle is to use the phase detector to make the nominal frequency the same. The phase difference between the two input signals becomes a voltage, and the voltage change is recorded by a tape or digital recorder. Observing one The amount of change in phase difference during the period of time can be derived from the average frequency deviation of the period of time. Linear phase ratio meter (hereinafter referred to as ratio Phase meter) is used to measure the frequency accuracy, frequency drift rate and frequency stability of various atomic frequency standards and high-stability crystal oscillators. Degree.

3 Metrological performance requirements

3.1 Frequency range. 100kHz~10MHz 3.2 Input sensitivity. 300mV (rms) (input impedance 50Ω) 3.3 Phase drift (for 5MHz). ≤ 4ns (observation time 1 day) 3.4 Nonlinear (for 5MHz). ≤ 4ns 3.5 phase deadband (for 5MHz). ≤10ns

4 General technical requirements

4.1 Appearance and logo The front or rear panel of the phase contrast meter should have the name of the manufacturer, the instrument model, the factory number, the mark and the electricity. Source requirements. 4.2 Other requirements 4.2.1 The phase button, input port and control port of the phase comparator should have a clear mark. 4.2.2 The first phase of the phase measuring instrument shall be accompanied by the instruction manual, and the subsequent verification shall be accompanied by the instruction manual and the verification of the last verification. certificate.

5 measuring instrument control

Includes initial verification, follow-up verification, and in-use inspection. 5.1 Verification conditions 5.1.1 Environmental conditions 5.1.1.1 Temperature. It can be at any point from 10 °C to 30 °C, but the temperature fluctuation during the test should not exceed ±2 °C 5.1.1.2 Relative humidity. ≤80% 5.1.1.3 AC power supply voltage. 220 (1±10%) V, (50±1) Hz 5.1.1.4 There are no electromagnetic interference or mechanical vibrations affecting the normal operation of the instrument.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of JJG 433-2004_English be delivered?

Answer: Upon your order, we will start to translate JJG 433-2004_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of JJG 433-2004_English with my colleagues?

Answer: Yes. The purchased PDF of JJG 433-2004_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version JJG 433-2004?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version JJG 433-2004 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.