|
US$239.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 6155-2008: Carbon materials -- Determination of the true density or porosity
Status: Obsolete GB/T 6155: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 6155-2008 | English | 239 |
Add to Cart
|
3 days [Need to translate]
|
Carbon materials -- Determination of the true density or porosity
| Obsolete |
GB/T 6155-2008
|
| GB/T 6155-1985 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Carbon materials--Determination of the true density
| Obsolete |
GB/T 6155-1985
|
PDF similar to GB/T 6155-2008
Basic data | Standard ID | GB/T 6155-2008 (GB/T6155-2008) | | Description (Translated English) | Carbon materials -- Determination of the true density or porosity | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Q52 | | Classification of International Standard | 29.050 | | Word Count Estimation | 6,684 | | Date of Issue | 2008-12-06 | | Date of Implementation | 2009-10-01 | | Older Standard (superseded by this standard) | GB/T 6155-1985; GB/T 6156-1985 | | Quoted Standard | GB/T 8170 | | Regulation (derived from) | National Standard Approval Release Bulletin No. 19 of 2008 (No. 132) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the definition of true density of carbon materials and the true porosity of, test procedure, , specimens, principle, reagents, instruments and equipment calculated results, experimental error and test reports. This standard applies to the determination of the true density of carbon materials and true porosity. | GB/T 6155-2008: Carbon materials -- Determination of the true density or porosity---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Carbon materials. Determination of the true density or porosity
ICS 29.050
Q52
National Standards of People's Republic of China
Replacing GB/T 6155-1985, GB/T 6156-1985
Carbon material true density and true porosity rate determination method
Posted 2008-12-06
2009-10-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard replaces GB/T 6155-1985 "Determination of the true density of the carbon material" and GB/T 6156-1985 "Carbon Materials true porosity
Method for determination. "
This standard and GB/T 6155-1985 The main differences are as follows.
--- Consolidated standard name to the true density of carbon material true porosity rate determination method;
--- The two standards the same content into the same section;
--- The experimental error to precision.
The standard proposed by China Iron and Steel Association.
This standard is under the jurisdiction of the National Steel Standardization Technical Committee.
This standard was drafted. Metallurgical Industry Information Standards Institute, Sinosteel Jilin Carbon Company.
The main drafters of this standard. Sun Wei, Alice Zhang Feng, Zhang Ying.
This standard replaces the standards previously issued as follows.
--- GB/T 6155-1985;
--- GB/T 6156-1985.
Carbon material true density and true porosity rate determination method
1 Scope
This standard specifies the definition of carbon materials for determination of true density and true porosity, principle, reagents, instruments and equipment, samples, test procedures, knot
If calculations, experimental error and test reports.
This standard applies to the determination of the carbon material true density and true porosity.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 8170 repair value expressed about the rules and limit values \u200b\u200band judgment
3 Terms and Definitions
3.1
True density is the true quality and volume ratio of carbon material (does not contain porosity included) of.
3.2
True porosity is the ratio of the true density difference with the volume density and true density.
Principle 4
The sample was immersed in a liquid vacuum exhaust, the density was measured using a pycnometer method which at 25 ℃.
5 Reagents
5.1 ethanol. 95%, AR.
5.2 acetone. AR.
5.3 sulfuric acid. the density of 1.84g/cm3, analytically pure.
5.4 Potassium dichromate. AR.
5.5 Xylene. Density 0.860g/cm3, analytically pure.
6 instruments and equipment
6.1 pycnometer. 25mL/25 ℃, long neck, the inner diameter of the neck 3.5mm ~ 4.5mm, or 25mL/25 ℃ capillary pycnometer.
6.2 dropper. 50mL ~ 125mL.
6.3 constant temperature water bath. can be controlled at 25 ℃ ± 0.5 ℃.
6.4 Analysis of balance. a sense of the amount of 0.1mg.
6.5 drying oven. Temperature range 0 ℃ ~ 200 ℃.
6.6 dryer. A built-in color gel.
6.7 qualitative filter paper.
6.8 suction device. with a pressure indicating instrument.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 6155-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 6155-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 6155-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 6155-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 6155-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 6155-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|