Standard Briefing:Stadard ID: GB/T 45476-2025
Stadard Title: Safety requirements for plastics blow moulding machines
Price (USD): 519
Lead day (Deliver True-PDF English version): 5 days [Need to translate]
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 45476-2025 | English | 519 |
Add to Cart
|
5 days [Need to translate]
|
Safety requirements for plastics blow moulding machines
| Valid |
GB/T 45476-2025
|
PDF Samples:
Basic Data: | Standard ID | GB/T 45476-2025 (GB/T45476-2025) | | Description (Translated English) | Safety requirements for plastics blow moulding machines | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | G95 | | Classification of International Standard | 71.120; 83.200 | | Word Count Estimation | 26,270 | | Date of Issue | 2025-03-28 | | Date of Implementation | 2025-10-01 | | Issuing agency(ies) | State Administration for Market Regulation, National Standardization Administration | Contents, Scope, and Excerpt:GB/T 45476-2025.Safety requirements for plastic blow molding machines
GB/T 45476-2025 English version. Safety requirements for plastics blow molding machines
ICS 71.120;83.200
CCSG95
National Standard of the People's Republic of China
Safety requirements for plastic blow molding machines
Released on 2025-03-28
2025-10-01 Implementation
State Administration for Market Regulation
The National Standardization Administration issued
Table of ContentsPreface III
Introduction IV
1 Range 1
2 Normative references 1
3 Terms and Definitions 2
4 Safety requirements and/or protection/risk reduction measures 3
5 Verification of compliance with safety requirements and/or protection/risk reduction measures 9
6 Usage Information10
Appendix A (Informative) Major Hazards 12
Appendix B (Normative) Noise Test Procedure 14
Appendix C (Normative) Confirmation System 17
Reference 18
ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents"
Drafting.
Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.
This document was proposed by the China Petroleum and Chemical Industry Federation.
This document is under the jurisdiction of the National Rubber and Plastics Machinery Standardization Technical Committee (SAC/TC71).
This document was drafted by. National Plastic Machinery Product Quality Supervision and Inspection Center, Suzhou Tongda Machinery Co., Ltd., Jiangsu Vinda Machinery
Machinery Co., Ltd., Shandong Tongjia Intelligent Equipment Co., Ltd., Suzhou Jinwei Hollow Technology Co., Ltd., Guangdong Leshan Intelligent Equipment Co., Ltd.
Company, Shandong Standardization Association, Beijing Rubber Industry Research and Design Institute Co., Ltd., Ningbo Jinge Intelligent Equipment Co., Ltd., Qingdao University of Science and Technology,
Dalian Plastic Machinery Research Institute.
The main drafters of this document are. Zheng Ji, Ma Xiaogang, Xu Wenliang, Liu Jing, Dai Qiang, Fang Anle, Guo Xinan, Zhao Zhongtao, He Cheng, Wang Gengxin, Lu Jianguo,
Wang Chuansheng, Wang Jinxia, and Yang Hong.
introduction
According to the classification of GB/T 15706, this document belongs to Class C standard.
This document is particularly relevant to the following stakeholders involved in machinery safety.
---Machine manufacturer;
---Health and safety agencies.
Other stakeholders affected by the level of machinery safety are.
---Machine users;
---Machine owner;
---Service providers;
--- Consumer (when the machine is intended for use by a consumer).
All of the above stakeholders may participate in the drafting of this document.
The machines involved and the range of hazards, hazardous situations and hazardous events covered are given in the scope of this document.
When the requirements of this document differ from those in Category A or Category B standards,
For devices, the requirements of this document take precedence over those in other standards.
Safety requirements for plastic blow molding machines
ScopeThis document specifies the plastic hollow molding machine (including plastic extrusion blow molding machine, plastic extrusion blow molding machine, plastic injection molding machine
Safety requirements for the design and manufacture of blow molding machines, plastic injection stretch blow molding machines, and blow molding machines that directly blow mold the parison
and conformity verification, giving information on safe use of the machine.
This document is applicable to the processing of plastic blow molding machines throughout their life cycle (see 5.4 in GB/T 15706-2012).
All the consequences of the use of the plastic blow molding machine that may arise during the use of the machine and in the event of misuse that is reasonably foreseeable by the manufacturer.
Major hazards, hazardous conditions and hazardous incidents (see Appendix A).
NOTE. This document does not cover the design requirements for auxiliary equipment and the exhaust ventilation system itself, nor the hazards arising from the use of fluorine or other toxic substances.
Normative ReferencesThe contents of the following documents constitute essential clauses of this document through normative references in this document.
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to
This document.
GB 2894 Safety signs and their use guidelines
GB/T 3766 General rules and safety requirements for hydraulic transmission systems and their components
GB/T 3767 Acoustics - Determination of sound power level and sound energy level of noise source by sound pressure method - Engineering method for approximate free field above reflecting surface
GB/T 3768 Acoustics Sound Pressure Method for Determination of Sound Power Level and Sound Energy Level of Noise Source Using a Simple Measurement Surface Enveloped Above the Reflecting Surface
Easy Method
GB/T 5226.1-2019 Electrical safety of machinery Electrical equipment of machinery Part 1.General technical requirements
GB/T 5563-2013 Hydrostatic test methods for rubber and plastic hoses and hose assemblies
GB/T 7932 General rules and safety requirements for pneumatic systems and their components
GB/T 8196 Mechanical safety guards - General requirements for the design and manufacture of fixed and movable guards
GB/T 9574-2017 Ratio of proof pressure, burst pressure and maximum working pressure of rubber and plastic hoses and hose assemblies
GB/T 14574 Labeling and verification of noise emission values of acoustic machines and equipment
GB/T 15706-2012 General principles for safety design of machinery - Risk assessment and risk reduction
GB/T 16404.2 Acoustics - Determination of sound power level of noise source by sound intensity method - Part 2.Scanning measurement
GB/T 16538 Acoustics - Field comparison method for determining the sound power level of noise sources using the sound pressure method
GB/T 16754 Design principles for mechanical safety emergency stop function
GB/T 16855.1 Safety of machinery - Safety-related components of control systems - Part 1.General principles for design
GB/T 17248.2-2018 Noise emitted by acoustic machines and equipment above a reflecting surface with negligible environmental correction
Quasi-free field measurement of emission sound pressure levels at working positions and other specified positions
GB/T 17248.3-2018 Acoustics - Noise emitted by machines and equipment measured at working positions and other locations using approximate environmental corrections
Emission sound pressure level at a specified location
GB/T 17248.5-2018 Acoustic Noise emitted by machines and equipment is measured using accurate environmental corrections at work locations and other
Emission sound pressure level at a specified location
GB/T 17454.1 Safety of machinery - Pressure-sensitive protective devices - Part 1.General rules for the design and testing of pressure-sensitive mats and pressure-sensitive floors
|