Search result: GB/T 45132-2025
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 45132-2025 | English | 359 |
Add to Cart
|
4 days [Need to translate]
|
Tires intelligent manufacturing - Interconnection network architecture - General specification
| Valid |
GB/T 45132-2025
|
| Standard ID | GB/T 45132-2025 (GB/T45132-2025) | | Description (Translated English) | Tires intelligent manufacturing - Interconnection network architecture - General specification | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | G95 | | Classification of International Standard | 71.120; 83.200 | | Word Count Estimation | 18,139 | | Date of Issue | 2025-01-24 | | Date of Implementation | 2025-08-01 | | Issuing agency(ies) | State Administration for Market Regulation, National Standardization Administration |
GB/T 45132-2025.General Specification for Internet Architecture of Tire Intelligent Manufacturing
ICS 71.120;83.200
CCSG95
National Standard of the People's Republic of China
Tire Intelligent Manufacturing Internet Network Architecture
General Specifications
General specification
2025-08-01 Implementation
State Administration for Market Regulation
The National Standardization Administration issued
Table of Contents
Preface III
1 Range 1
2 Normative references 1
3 Terms and Definitions 1
4 Abbreviations 2
5 Tire Factory Internet Requirements and Connection Framework 3
5.1 Overall Requirements for Internet in Tire Factories 3
5.2 Internet connection framework for tire intelligent manufacturing 4
6 Tire Intelligent Manufacturing Internet Network Architecture 6
6.1 Tire Factory Internet Network Structure Division 6
6.2 Target Architecture 7
6.3 Topology 8
6.4 Functional Requirements 9
7 Implementation of Internet of Things for Intelligent Tire Manufacturing 9
7.1 Implementation Framework 9
7.2 Edge Access Network Implementation 10
7.3 Production Control Network Implementation 10
7.4 Tire Factory Backbone Network Implementation 10
7.5 Data Communication System Implementation 11
8 Tire Intelligent Manufacturing Internet Network Security 11
8.1 Equipment safety protection requirements 11
8.2 Network security protection requirements 11
8.3 Equipment access control security requirements 11
8.4 Data security requirements11
Preface
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents"
Drafting.
Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.
This document was proposed by the China Petroleum and Chemical Industry Federation.
This document is under the jurisdiction of the National Rubber and Plastics Machinery Standardization Technical Committee (SAC/TC71).
This document was drafted by. Soft Control Co., Ltd., Yiyang Rubber & Plastic Machinery Group Co., Ltd., Shandong Linglong Tire Co., Ltd.
Ltd., Xiongying Tire Group Co., Ltd., Prinx Chengshan (Shandong) Tire Co., Ltd., Sailun Group Co., Ltd., Tianjin Wanda Tire Group
Group Co., Ltd., Tianjin Saixiang Technology Co., Ltd., Shandong Fengyuan Tire Manufacturing Co., Ltd., Dalian Rubber and Plastic Machinery Co., Ltd.
Ltd., Qingdao University of Science and Technology, Guizhou Tire Co., Ltd., Fujian Jianyang Longxiang Technology Development Co., Ltd., Mitsubishi Electric Automation (China) Co., Ltd.
Ltd., Titanium (Beijing) Industrial Technology Co., Ltd., Qingdao Doublestar Tire Industry Co., Ltd., Taikaiying (Qingdao) Special Tire Technology Research
Research and Development Co., Ltd., Shandong Yongsheng Rubber Group Co., Ltd., Qingdao Wangong Information Technology Co., Ltd., Beijing Rubber Industry Research and Design Institute
Co., Ltd., Qingdao Soft Control Electromechanical Engineering Co., Ltd., Guangdong Yizumi Precision Injection Pressing Technology Co., Ltd., and Weifang Shunfuchang Rubber and Plastic Co., Ltd.
The main drafters of this document are. Guan Bingzheng, Yang Huili, Peng Zhishen, Li Jianxing, Gao Jiangang, Cao Kai, Yang Guang, Yu Liyi, Zhang Xiaochen, Zhang Ning,
Yang Hong, Wang Chuansheng, Jiao Dongmei, Han Hongchuan, Chen Yuquan, Cui Longcheng, Yang Mu, Chen Gang, Guo Yongfang, Hao Yufeng, Jiao Qingguo, He Cheng, Wang Gengxin, Wang Zhiming,
Jiang Xiaojun, Lu Wei, Li Qing, Fan Yinlei, Yu Zhenjiang, Chen Xingzhong, Wang Jinxia, Yang Hualin, Liu Yuncheng, Li Cuixia, Wu Zongwei.
Tire Intelligent Manufacturing Internet Network Architecture
General Specifications
1 Scope
This document specifies the terms and definitions, abbreviations, requirements and connection framework, network architecture, network implementation of tire intelligent manufacturing Internet.
and network security requirements.
This document is applicable to the design, construction and upgrade of the intelligent manufacturing Internet network architecture of tire companies.
2 Normative references
The contents of the following documents constitute the essential clauses of this document through normative references in this document.
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to
This document.
GB/T 22239-2019 Information security technology Network security level protection basic requirements
GB 40050-2021 General requirements for security of critical network equipment
3 Terms and definitions
The following terms and definitions apply to this document.
3.1
network architecturenetwork architecture
The overall design of communication systems provides standards for network hardware, software, protocols, access control, and topology.
3.2
field level
The lowest part of a distributed control system is also the most basic level.
Note. Including production equipment, instruments, etc.
3.3
Workshop level
A unit with relatively independent functions in the production process.
Note. In the tire industry, it mainly refers to the rubber mixing workshop, semi-finished product workshop, molding workshop, vulcanization workshop, testing workshop, etc. Each manufacturer will have different workshops according to the actual situation.
different.
3.4
Plant level
The entire factory of a tire company.
Note. Includes design, production, logistics, management and other aspects.
3.5
network topology
The physical layout of various devices interconnected by transmission media, which constitutes the specific physical (real) or logical (virtual) connections between members of the network.
Proposed arrangement.
......
|