|
US$1164.00 · In stock
Delivery: <= 8 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 42756.3-2023: Cards and security devices for personal identification - Contactless proximity objects - Part 3: Initialization and anticollision
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 42756.3-2023 | English | 1164 |
Add to Cart
|
8 days [Need to translate]
|
Cards and security devices for personal identification - Contactless proximity objects - Part 3: Initialization and anticollision
| Valid |
GB/T 42756.3-2023
|
PDF similar to GB/T 42756.3-2023
Basic data | Standard ID | GB/T 42756.3-2023 (GB/T42756.3-2023) | | Description (Translated English) | Cards and security devices for personal identification - Contactless proximity objects - Part 3: Initialization and anticollision | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | L70 | | Classification of International Standard | 35.240.15 | | Word Count Estimation | 63,625 | | Date of Issue | 2023-05-23 | | Date of Implementation | 2023-12-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 42756.3-2023: Cards and security devices for personal identification - Contactless proximity objects - Part 3: Initialization and anticollision
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 35:240:15
CCSL70
National Standards of People's Republic of China
Contactless Proximity for Card and Identification Security Devices
Objects Part 3: Initialization and Anticollision
(ISO /IEC 14443-3:2018, IDT)
Released on 2023-05-23
2023-12-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Management Committee
table of contents
Preface V
Introduction VI
1 Scope 1
2 Normative references 1
3 Terms and Definitions 2
4 Symbols, abbreviations and notation 3
4:1 Symbols and Abbreviations 3
4:2 Representation 4
5 General requirements 5
5:1 PICC and PCD alternate support (PXD) 5
5:2 TypeA and TypeB switching command 5
5:3 RFU treatment 6
6 TypeA initialization and anti-collision 6
6:1 etu 6
6:2 Frame Format and Timing 6
6:3 PICC state set 11
6:4 Command set 13
6:5 Select sequence 15
7 TypeB initialization and anti-collision 22
7:1 Characters, frames and timing 22
7:2 CRC_B 27
7:3 Anti-collision sequence 27
7:4 PICC Status Description 27
7:5 Command Set 31
7:6 Anti-collision response rules 31
7:7 REQB/WUPB command 32
7:8 Slot-MARKER command 33
7:9 ATQB response 34
7:10 ATTRIB command 38
7:11 Response to ATTRIB command 41
7:12 HLTB command and response 42
8 Electromagnetic Interference Handling 42
8:1 Overview 42
8:2 EMD Timing Constraints 43
8:3 EMD processing algorithm proposal for PCD 43
Appendix A (Informative) TypeA Communication Example 45
Appendix B (Informative) CRC_A and CRC_B Coding 47
Appendix C (informative) TypeA time slot initialization and anti-collision 51
Reference 55
Figure 1 Frame delay timing from PCD to PICC at fc/16 bit rate 7
Figure 2 Short frame 9
Figure 3 PCD standard frame 9 with bit rates fc/128, fc/64, fc/32, fc/16
FIGURE 4 PICC standard frame10 for all bit rates
Figure 5 Bit organization and transmission of bit-oriented anti-collision frame, complete byte 11
Figure 6 Bit organization and transmission of bit-oriented anti-collision frame, separated byte 11
Figure 7 TypeAPICC State Figure 12
Figure 8 Standard frame 15 containing HLTA commands
Figure 9 PCD initialization and anti-collision flowchart 15
Figure 10 PCD anti-collision loop flow chart 19
Figure 11 Selection Confirmation (SAK) 20
Figure 12 Use of concatenated levels 22
Figure 13 Character transmission format 23
Figure 14 frame format 24
Figure 15 SOF 24
Figure 16 EOF 25
Figure 17 Timing before PICCSOF 26
Figure 18 Timing before PCDSOF 26
Figure 19 PICCTypeB state machine Figure 28
Figure 20 PICC initialization and anti-collision flowchart 29
Figure 21 REQB/WUPB command format 32
Figure 22 Coding 33 of PARAM
Figure 23 Slot-MARKER command format 34
Figure 24 ATQB response format 34
Figure 25 Application data format 35
Figure 26 Protocol information format 36
Figure 27 ATTRIB command format 38
Figure 28 Parameter 1 code 39
Figure 29 Response format to ATTRIB command 41
Figure 30 PICC response format to ATTRIB command (excluding upper layer response) 42
Figure 31 Format of HLTB command 42
Figure 32 PICC response format to HLTB command 42
Figure 33 Low EMD period 43
Figure A:1 Selection sequence for bit frame anti-collision 45
Figure B:1 CRC_A encoding of Example 1 47
Figure B:2 CRC_A encoding of Example 2 47
Figure B:3 CRC_B encoding of Example 1 48
Figure B:4 CRC_B encoding of Example 2 48
Figure B:5 CRC_B encoding of Example 3 48
Figure C:1 PICC anti-collision sequence flow chart 54
Table 1 etu 6
Table 2 PCD to PICC frame delay time8
Table 3 Short frame format14
Table 4 ATQA code 16
Table 5 Coding of b7 and b8 for bit frame anti-collision16
Table 6 Coding of b1~b5 for bit frame anti-collision16
Table 7 PLIATQ code 17
Table 8 Coding of SEL19
Table 9 NVB code 20
Table 10 Code 20 of SAK
Table 11 UID length 21
Table 12 UID of single length 21
Table 13 UIDs of double and triple length 21
TABLE 14 From PCD to PICC bit boundary 23
Table 15 EGT 23 from PCD to PICC
Table 16 EGT 23 from PICC to PCD
Table 17 SOF 24 sent by PCD
Table 18 SOF low level sent by PICC 24
Table 19 SOF high level sent by PICC 25
Table 20 EOF sent by PCD 25
Table 21 EOF 25 sent by PICC
Table 22 Timing before PCDSOF (close fs) 27
Table 23 AFI code 32
Code 33 of Table 24 N
Table 25 Coding of slot number 34
Table 26 Frame option 36 supported by PICC
Table 27 Protocol Type Encoding 36
Table 28 TR2 Minimum Code 37
Table 29 Maximum frame length 37
TABLE 30 Bit rates supported by PICC37
Table 31 Minimum TR0 code39
Table 32 Minimum TR1 code39
Table 33 SOF treatment 40
Table 34 EOF treatment 40
Table 35 b4~b1 encoding of parameter 2 40
Table 36 b6 and b5 encoding of parameter 240
Table 37 b8 and b7 encoding of parameter 240
Table A:1 Explanation to Figure A:1 46
Table B:1 Initial contents of the 16-stage shift register according to the value '6363' 47
Table B:2 Contents of the 16-stage shift register according to the value '1EA0' 47
Table B:3 Contents of the 16-stage shift register according to the value 'CF26' 48
Table C:1 TypeA time slot standard frame 52
Table C:2 TypeA time slot command and response set 52
Table C:3 TypeA time slot REQ-ID command parameter 53
foreword
This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standardization Documents"
drafting:
This document is part 3 of GB/T 42756 "Card and Identification Security Equipment Contactless Proximity Object": GB/T 42756 has
The following parts have been published:
--- Part 1: Physical characteristics;
--- Part 2: RF power and signal interface;
--- Part 3: Initialization and anti-collision;
--- Part 4: Transmission protocol:
This document is equivalent to ISO /IEC 14443-3:2018 "Card and Identification Security Equipment Contactless Proximity Object Part 3
Part: Initialization and Anticollision":
The following editorial changes have been made to this document:
---Included in the amendments of ISO /IEC 14443-3:2018/Amd:1:2021, ISO /IEC 14443-3:2018/Amd:2:2020
Content and technical corrigenda of ISO /IEC 14443-3:2018/Cor:1:2022, the outer margins of the terms involved
are marked with a vertical double line (‖);
--- List the abbreviation "EMD" that is used multiple times in the text but not listed in 4:1 in 4:1;
--- Adjust the informative reference to ISO /IEC 7816-4 in the text to the reference:
Please note that some contents of this document may refer to patents: The issuing agency of this document assumes no responsibility for identifying patents:
This document is proposed and managed by the National Information Technology Standardization Technical Committee (SAC/TC28):
This document is drafted by: China Electronics Standardization Research Institute, Shenzhen Chuangzhicheng Technology Co:, Ltd:, Beijing Zhixin Microelectronics
Technology Co:, Ltd:, Jiangsu Saixi Technology Development Co:, Ltd:, Xiamen Xizhong Electronic Technology Co:, Ltd:, Datang Microelectronics Technology Co:, Ltd:, Beijing
Beijing Ziguang Qingteng Microsystem Co:, Ltd:, Goldpac Co:, Ltd:, Beijing Watchdata Co:, Ltd:, Wuhan Tianyu Information Industry Co:, Ltd:
Co:, Ltd:, Tianjin Zhuolang Technology Development Co:, Ltd:, Beijing Eyes Intelligent Technology Co:, Ltd:, Beijing Anyu Daohe Technology Co:, Ltd:, Feitiancheng
Xinxin Technology Co:, Ltd:, Ziguang Tongxin Microelectronics Co:, Ltd:, Jiangxi Ruichuang Technology Co:, Ltd:, Beijing Zhongdian Huada Electronic Design Co:, Ltd:
Liability Company, China Electronics Smart Card Co:, Ltd:, Shanghai Fudan Microelectronics Group Co:, Ltd:, Chutianlong Co:, Ltd:, Eastcom and
Ping Technology Co:, Ltd:, Shanghai Mitt Printing Co:, Ltd:, Guangzhou Palm Smart Technology Co:, Ltd:
The main drafters of this document: Cao Guoshun, Li Bin, Xu Jianping, Zhao Dongyan, Ye Jiayi, Ding Yimin, Cheng Wenjie, Zheng Jiangdong, Zhang Shurui,
Hu Ruijing, Liu Jia, Zhang Kunyu, Yang Chunlin, Li Yongming, Zhu Pengfei, Zhou Bin, Sheng Jinggang, Xiong Xiaohuan, Pan Liang, Zhang Gang, Shao Xing, Jiang Quming, Lou Shuiyong,
Gao Jian, Xu Jing, Tang Zhongze, Xia Lijia, Shi Chunteng, Zhang Xiaoliang, Luo Weijia:
Introduction
Contactless card standards include ISO /IEC 10536 (tightly coupled card), GB/T 42756 (proximity card) and GB/T 22351 (all parts
Points) (proximity card) and other types: These types of equipment are used for very close, close and long distances from the associated coupling device, respectively:
to operate:
GB/T 42756 "Card and Identity Recognition Security Equipment Contactless Proximity Object" stipulates that identification cards and identification cards in accordance with GB/T 14916
The technical requirements for flexible thin cards complying with GB/T 28177:1, and how to use these cards for information exchange: This technique provides the standard
Forms other than quasi-card formats offer the possibility to approach type objects: Also, it does not preclude the use of other technologies on the card, such as
The technology in GB/T 42756:1-2023 references:
GB/T 42756 consists of four parts:
--- Part 1: Physical properties: The purpose is to specify the physical characteristics of proximity objects:
--- Part 2: RF power and signal interface: The purpose is to specify the Proximity Coupling Device (PCD) and the Proximity Card or Object
(PICC) provides the characteristics of the field of energy and two-way communication:
--- Part 3: Initialization and anti-collision: The purpose is to specify requirements for contactless proximity object initialization and anti-collision:
--- Part 4: Transmission protocol: The purpose is to establish a half-duplex block transfer protocol required for a contactless environment and to specify activation and deactivation
A step of:
Contactless Proximity for Card and Identification Security Devices
Objects Part 3: Initialization and Anticollision
1 Scope
This document specifies:
---Polling of a proximity card or object (PICC) entering the field of a proximity coupling device (PCD);
--- The character format, frame and timing of the communication initialization phase between PCD and PICC;
--- Contents of initial request and request response;
---Detect and select one of the multiple PICCs for communication (anti-collision);
---Other parameters required for initial communication between PICC and PCD;
--- A method for simply and quickly selecting a PICC from multiple PICCs based on application standards;
--- The ability to allow the device to switch between PICC and PCD functions and communicate with PCD or PICC respectively: have
Devices of this capability are called PXDs:
The protocols and commands used by the upper layers and applications after the initialization phase are described in ISO /IEC 14443-4:
This document applies to TypeAPICC and TypeBPICC (as described in ISO /IEC 14443-2), and PCD (as described in ISO /IEC
IEC 14443-2) and PXD:
Note 1: The timing part of data communication is defined in ISO /IEC 14443-2:
Note 2: The test methods of this document are defined in ISO /IEC 10373-6:
2 Normative references
The contents of the following documents constitute the essential provisions of this document through normative references in the text: Among them, dated references
For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to
this document:
Note: GB/T 16649:6-2001 Identification cards IC cards with contacts Part 6: Inter-industry data elements (idtISO /IEC 7816-6:1996)
ISO /IEC 13239 High-level data link control (HDLC) procedures for telecommunication and information exchange between information technology systems [In-
Note: GB/T 7421-2008 High-level data link control (HDLC) procedures for telecommunication and information exchange between information technology systems (ISO /
IEC 13239:2002, IDT)
ISO /IEC 14443-2 Cards and identification security devices Contactless proximity objects Part 2: Radio frequency power and signal interfaces
Note: GB/T 42756:2-2023 Cards and identification security equipment Contactless proximity objects Part 2: RF power and signal interface (ISO /
IEC 14443-2:2020, MOD)
ISO /IEC 14443-4 Cards and identification security devices Contactless proximity objects Part 4: Transmission protocol (Cardsand
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 42756.3-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 42756.3-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 5 ~ 8 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 42756.3-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 42756.3-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|