HOME   Cart(1)   Quotation   About-Us Tax PDFs Standard-List
Powered by Google-Search & Google-Books www.ChineseStandard.net Database: 189759 (27 Nov 2022)

GB/T 38880-2020 (GBT 38880-2020)

Chinese standards (related to): 'GB/T 38880-2020'
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)See DetailStatusGoogle Book
GB/T 38880-2020English140 Add to Cart 0--3 minutes. Auto immediate delivery. Technical specification of children mask GB/T 38880-2020 Valid GBT 38880-2020


   
BASIC DATA
Standard ID GB/T 38880-2020 (GB/T38880-2020)
Description (Translated English) Technical specification of children mask
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard W55
Classification of International Standard 59.080.30
Word Count Estimation 11,111
Date of Issue 2020-05-06
Date of Implementation 2020-05-06
Drafting Organization China Industrial Textiles Industry Association, Beijing Labor Protection Research Institute, Steady Medical Products Co., Ltd., Zhongke Best (Xiamen) Environmental Protection Technology Co., Ltd., Zhejiang Lanhe Medical Products Co., Ltd., Sima (Qingdao) Protection Technology Co., Ltd., Ogilvy Medical Products Co., Ltd., Honeywell Safety Protection Equipment (Shanghai) Co., Ltd., Suzhou Boris Medical Technology Co., Ltd., Tianjin Teda Clean Materials Co., Ltd., Shengna Technology (Shanghai) Co., Ltd., Rizhao Sanqi Medical and Health Products Co., Ltd., Jiande Chaomei Daily Chemical Co., Ltd., Jingzhou Sichuang Technology Development Co., Ltd., Sichuan Youbang Enterprise Co., Ltd., Shenzhen Yiwen Medical Technology Co., Ltd., Hangzhou Reliable Nursing Products Co., Ltd., Run American Paper (Fujian) Co., Ltd., Zhejiang Zhen
Administrative Organization National Textile Standardization Technical Committee (SAC/TC 209)
Proposing organization China National Textile and Apparel Council
Issuing agency(ies) State Administration for Market Regulation, National Standardization Administration
Summary This standard specifies the terms and definitions, classification and specifications, technical requirements, test methods, inspection rules, packaging, labeling, safety warnings, storage and transportation of children's masks. This standard applies to masks worn by children aged 6 and above and 14 and below, used to filter particulate matter in the air and block microorganisms, pollen, droplets, etc. This standard does not apply to masks containing electric air supply (exhaust) devices.


GB/T 38880-2020: PDF in English (GBT 38880-2020)
GB/T 38880-2020
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 59.080.30
W 55
Technical Specification of Children Mask
ISSUED ON: MAY 06, 2020
IMPLEMENTED ON: MAY 06, 2020
Issued by: State Administration for Market Regulation;
Standardization Administration of PRC.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative References ... 4
3 Terms and Definitions ... 5
4 Classification and Specifications ... 6
5 Technical Requirements ... 6
6 Test Methods ... 8
7 Inspection Rules ... 11
8 Packaging, Marking, Safety Warnings, Storage and Transportation ... 11
Appendix A (Normative) Requirements for Tested Head Mold ... 14
Bibliography ... 16
Technical Specification of Children Mask
1 Scope
This Standard specifies the terms and definitions, classification and specifications,
technical requirements, test methods, inspection rules, packaging, marking, safety
warnings, storage and transportation of children mask (hereinafter referred to as mask).
This Standard is applicable to the masks worn by children 6 years old and above, 14
years old and below to filter particulate matter in the air, blocking microorganisms,
pollen, spray, etc.
This Standard is not applicable to mask containing electric air supply (exhaust) device.
2 Normative References
The following documents are essential to the application of this document. For the
dated documents, only the versions with the dates indicated are applicable to this
document; for the undated documents, only the latest version (including all the
amendments) are applicable to this document.
GB/T 2912.1 Textiles - Determination of Formaldehyde - Part 1: Free and
Hydrolyzed Formaldehyde (Water Extraction Method)
GB/T 7573 Textiles - Determination of pH of the Aqueous Extract
GB/T 14233.1-2008 Test Methods for Infusion Transfusion Injection Equipment for
Medical Use - Part 1: Chemical Analysis Methods
GB 15979-2002 Hygienic Standard for Disposable Sanitary Products
GB/T 17592 Textiles - Determination of the Banned Azo Colorants
GB 18401-2010 National General Safety Technical Code for Textile Products
GB/T 29865 Textiles - Tests for Color Fastness - Color Fastness to Rubbing - Small
Areas
GB/T 31702-2015 Testing Method for Sharpness of Attached Components on
Textile Products
The resistance value of the airflow that penetrates through the mask body under
specified conditions.
NOTE: Its unit is Pa.
4 Classification and Specifications
4.1 Classification
According to the performance of masks, children masks are divided into child
protective mask (F) and child hygiene mask (W).
4.2 Specifications
According to the size of head and face of children at different ages, children masks are
divided into small (S), medium (M) and large (L).
5 Technical Requirements
5.1 Basic requirements
5.1.1 The mask shall be able to cover the mouth, nose and jaw safely and firmly without
odor, and shall not significantly affect the visual field.
5.1.2 The raw materials of the mask shall not use recycled materials; materials known
to cause skin irritation or other adverse reactions shall not use; and the materials shall
not undergo chlorine bleaching treatment. The residual amount of other restricted
substances shall meet the relevant requirements. The used materials shall ensure that
the mask does not break or deform during its normal service life.
NOTE: The mask supplier should be able to prove that its material meets such requirements.
It may prove that the textile material used in the mask meets the requirements of category 4.2A
in GB 31701-2015 by accepting inspection or providing a test report.
5.1.3 Masks shall not use tie-on mask; and adjustable mask straps should be used.
5.1.4 The mask shall be easy to wear and take off; there shall be no obvious feeling of
pressure or tenderness during wearing; and there shall be no obvious effect on the
head movement.
5.1.5 For masks equipped with nose clips, the nose clips shall be made of plastic
material.
5.1.6 For masks equipped with a breathing valve, the parts inside the breathing valve
6.6 Migratable optical brightener
It shall be implemented according to FZ/T 01137; cut the sample at the contact layer
between the mask and human face.
6.7 Residue of ethylene oxide
It shall be implemented according to the provisions of Clause 9 in GB/T 14233.1-2008.
Take a parallel sample to test; the sample is cut from the mask body. If the one test
result is qualified and the other is unqualified, the average calculation shall not be
performed. The sample shall be re-taken, and the highest value shall be used as the
test result. The result calculation is expressed by relative content, and retain one digit
after the decimal point.
6.8 Nose clip length
Take 3 samples for testing; measure by general or special measuring tools with
accuracy of 0.1cm.
6.9 Folding resistance of nose clip
Take 2 samples. Take the middle of the nose clip as the test point; fold the nose clip in
half for 20 times with hands or other suitable instruments.
NOTE: For the convenience of testing, the nose clip and the surrounding covering may be cut
off from the mask.
6.10 Breaking strength of mask strap, and the connection between mask strap
and body
It shall be implemented according to the provisions of 6.9 in GB/T 32610-2016.
6.11 Inhalation resistance
It shall be implemented according to the provisions of 6.7 in GB/T 32610-2016. The
test flow rate is (45±2) L/min; and the size of the head mold shall meet the requirements
of Appendix A.
6.12 Exhalation resistance
It shall be implemented according to the provisions of 6.8 in GB/T 32610-2016. The
test flow rate is (45±2) L/min; and the size of the head mold shall meet the requirements
of Appendix A.
6.13 Particle protective performance
It shall be implemented according to the provisions of Appendix B in GB/T 32610-2016.
7 Inspection Rules
7.1 Sampling
Products with the same variety and the same specification (model) according to the
delivery batch number are regarded as inspection batches. Random samples are
taken from each inspection batch according to the test requirements; and the number
of the samples must at least meet the requirements of each individual test specified in
Clause 6. When the delivery quantity of the same delivery batch of child hygiene masks
is greater than 500,000, and the delivery quantity of the same delivery batch of child
protective masks is greater than 100,000, the sampling quantity shall be doubled.
7.2 Quality judgment
7.2.1 Appearance quality judgment
The appearance quality is tested according to 6.1; and at least 8 or more samples
meet the requirements of 5.2. If the requirements of 5.2 are met, then it shall be judged
to be qualified; otherwise, it is judged to be unqualified.
7.2.2 Intrinsic quality judgment
If the intrinsic quality meets the requirements of 5.3, it shall be judged to be qualified;
otherwise it is judged to be unqualified.
7.2.3 Results judgment
If the appearance quality and the intrinsic quality are all qualified, the batch of products
shall be judged to be qualified; otherwise the batch of products is judged to be
unqualified.
8 Packaging, Marking, Safety Warnings, Storage and
Transportation
8.1 Packaging
The mask shall be sealed and packaged for easy access and avoid contamination
before use.
8.2 Marking
The minimum sales package shall have the qualified mark of inspection; and the
obvious parts shall be attached with a clear and identifiable mark. The mark shall
include but not limited to the following contents:
a) Name and address of the manufacturer;
b) Product name and category [including the words "children protective mask (F)"
or "children hygiene mask (W)"];
c) Product specifications [small (S), medium (M), large (L)];
d) Main raw materials;
e) Executive standard number;
f) Instructions for use (wearing method, safety warning, etc.);
g) Production date, shelf life, recommended use time (hours);
h) If disinfection is adopted, the disinfection method shall be indicated.
8.3 Safety warning
The minimum sales package or instruction manual of the mask shall include but not
limited to the following warnings:
a) Children with breathing difficulties are not recommended to wear a mask. If they
need to wear it, they shall follow the doctor's advice or wear other suitable
respiratory protective equipment.
b) When using it, remove the mask packaging materials and other objects not
related to the mask wearing in time.
c) Children shall wear masks under the care of adults; and caregivers shall observe
and educate children to wear masks correctly. Children shall not fight in jest or
for fun or engage in moderate and above-intensity exercise while wearing the
mask; and shall not disassemble the breathing valve and the parts inside the
breathing valve. If symptoms such as respiratory discomfort and skin allergies
occur during wearing, the mask shall be removed in time; if necessary,
im......