GB/T 38668-2020 PDF English
US$165.00 · In stock · Download in 9 secondsGB/T 38668-2020: Intelligent manufacturing - Radio frequency identification system - General technical requirements Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 38668-2020 | English | 165 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Intelligent manufacturing - Radio frequency identification system - General technical requirements
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 38668-2020
GB/T 38668-2020: Intelligent manufacturing - Radio frequency identification system - General technical requirements
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT38668-2020
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 35.240.50
L 64
Intelligent Manufacturing - Radio Frequency
Identification System - General Technical
Requirements
智能制造 射频识别系统
ISSUED ON: APRIL 28, 2020
IMPLEMENTED ON: NOVEMBER 1, 2020
Issued by: State Administration for Market Regulation;
Standardization Administration of the People's Republic of
China.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative References ... 4
3 Terms and Definitions ... 5
4 Abbreviations ... 5
5 System Composition ... 6
6 General Requirements for RFID System ... 7
Intelligent Manufacturing - Radio Frequency
Identification System - General Technical
Requirements
1 Scope
This Standard specifies the composition of intelligent manufacturing-oriented radio
frequency identification system, as well as the general technical requirements for RFID
tag, reader-writer and middleware, etc.
This Standard is applicable to the design, development and application of intelligent
manufacturing-oriented radio frequency identification system.
2 Normative References
The following documents are indispensable to the application of this document. In
terms of references with a specified date, only versions with a specified date are
applicable to this document. In terms of references without a specified date, the latest
version (including all the modifications) is applicable to this document.
GB/T 6107-2000 Interface between Data Terminal Equipment and Data Circuit
Terminating Equipment Employing Serial Binary Data Interchange
GB/T 29261.3-2012 Information Technology - Automatic Identification and Data
Capture (AIDC) Techniques - Vocabulary - Part 3: Radio-frequency Identification
GB/T 29266-2012 Radio Frequency Identification - 13.56 MHz Tag Basic Electrical
Characteristics
GB/T 29768-2013 Information Technology - Radio Frequency Identification - Air
Interface Protocol at 800/900 MHz
GB/T 32830.3-2016 Manufacturing Process for Equipment Manufacturing - Radio
Frequency Identification - Part 3: System Application Interface Specification
GB/T 33848.3-2017 Information Technology - Radio Frequency Identification - Part 3:
Parameters for Air Interface Communications at 13.56 MHz
GB/T 34047-2017 Reference Architecture of Information Integration Middleware
Platform for Internet of Things in Manufacturing Processes
GB/T 34996-2017 Specification of the 800/900 MHz Radio Frequency Identification
c) The user area shall have the functions of data storage, data writing and data
reading. The format of the stored data shall comply with the requirements of
GB/T 38670-2020;
d) In accordance with the demands of the application scenario, the integration
with the sensor shall be implemented;
e) It shall have relatively strong anti-interference against the metal environment
and electromagnetic interference in the application scenario;
f) The installation mode shall be firm; the installation position shall not affect the
manufacturing activities;
g) In accordance with different application scenarios of intelligent manufacturing,
HF tag or UHF tag may be selected. The air interface protocol of the HF tag
shall comply with the requirements of GB/T 33848.3-2017; the electrical
characteristics shall comply with the requirements of GB/T 29266-2012. The
air interface protocol of the UHF tag should comply with the requirements of
GB/T 29768-2013; the other performances shall comply with the requirements
of GB/T 36365-2018.
6.3 RFID Reader-writer
The requirements for RFID reader-writer are as follows:
a) It shall have the functions of normal inventory, reading and / or re-writing tag
data, etc.;
b) The storage capacity and data retention time of the memory shall be indicated
in the product instruction;
c) It shall have the capability of offline working;
d) It shall have the function of industrial field bus access;
e) It shall have the function of filtering the read tag data and screening redundant
information in accordance with the set filtering conditions;
f) It shall have the function of communicating with the middleware; it shall have
the capability of uploading reading information, statistical information and fault
information to the middle; it shall have the function of receiving the
middleware’s configuration management information;
g) It shall have interface functions, such as: information query, parameter
configuration, device instructions, reading and writing commands, and status
report, etc. In terms of parameter configuration, it shall implement
configuration management on the air interface parameters and network
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 38668-2020 be delivered?Answer: The full copy PDF of English version of GB/T 38668-2020 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 38668-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 38668-2020_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 38668-2020 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of GB/T 38668-2020?A step-by-step guide to download PDF of GB/T 38668-2020_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 38668-2020".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|