Powered by Google www.ChineseStandard.net Database: 189759 (26 May 2024)

GB/T 38134-2019 related PDF English

GB/T 38134-2019 (GB/T38134-2019, GBT 38134-2019, GBT38134-2019) & related versions
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)See DetailStatusSimilar PDF
GB/T 38134-2019English100 Add to Cart 0-9 seconds. Auto delivery. General technical specification for professional clothing GB/T 38134-2019 Valid GBT 38134-2019



Preview PDF: GB/T 38134-2019

GB/T 38134-2019: PDF in English (GBT 38134-2019)
GB/T 38134-2019
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 61.020
Y 75
General technical specification for professional
clothing
ISSUED ON: OCTOBER 18, 2019
IMPLEMENTED ON: MAY 01, 2020
Issued by: State Administration for Market Regulation;
Standardization Administration of the People’s Republic of
China.
Table of Contents
Foreword ... 3 
1 Scope ... 4 
2 Normative references ... 4 
3 Terms and definitions ... 5 
4 General technical requirements ... 5 
5 Test method ... 7 
6 Inspection rules ... 9 
7 Marking, packaging, transportation and storage ... 9 
General technical specification for professional
clothing
1 Scope
This Standard specifies the general technical requirements, test methods,
inspection rules, marking, packaging, transportation and storage of professional
clothing.
This Standard applies to professional clothing of mass production.
2 Normative references
The following documents are indispensable for the application of this document.
For dated references, only the dated version applies to this document. For
undated references, the latest edition (including all amendments) applies to this
document.
GB/T 250, Textiles - Tests for colour fastness - Grey scale for assessing
change in colour
GB/T 1335.1, Standard sizing systems for garments - Men
GB/T 1335.2, Standard sizing systems for garments - Women
GB/T 3917.2, Textile - Tear properties of fabrics - Part 2: Determination of
tear force of trouser-shaped test specimens (Single tear method)
GB/T 4802.1-2008, Textiles - Determination of fabric propensity for fuzzing
and pilling - Part 1: Circular locus method
GB/T 4802.3-2008, Textiles - Determination of fabric propensity to surface
fuzzing and to pilling - Part 3: Pilling box method
GB/T 5296.4, Instructions for use of products of consumer interest - Part 4:
Textiles and apparel
GB/T 6411, A series of size of knitted underwear
GB/T 8427-2008, Textiles - Tests for color fastness - Color fastness to
artificial light: Xenon arc fading lamp test
GB/T 8629-2017, Textiles - Domestic washing and drying procedures for
textile testing
GB/T 8630, Textiles - Determination of dimensional change in washing and
drying
GB/T 15557, Standard terminology relating to apparel
GB 18401, National general safety technical code for textile products
GB/T 19976-2005, Textiles - Determination of bursting strength - Steel ball
method
GB/T 21294, Testing methods of physical and chemical performance of
garments
GB/T 21295-2014, Requirements of physical and chemical performance of
garments
GB/T 22701, Rules of testing and inspection for professional clothing
GB/T 29862, Textiles - Identification of fiber content
FZ/T 80002, Marking, packaging, transportation and storage for garments
FZ/T 80007.3, Dry wash resistance test method for garments used adhesive
interlining
3 Terms and definitions
Terms and definitions determined by GB/T 15557 are applicable to this
document.
4 General technical requirements
4.1 Instructions for use
4.1.1 The instructions for use of professional clothing shall comply with the
provisions of GB/T 5296.4.
4.1.2 The identification mark shall reflect its professional attributes and
characteristics.
4.2 Size specifications
4.2.1 The size setting of professional clothing shall meet the requirements of
GB/T 1335.1, GB/T 1335.2 or GB/T 6411.
4.2.2 The specifications of main parts shall be designed according to the
relevant regulations of GB/T 1335.1, GB/T 1335.2 or GB/T 6411.
the measured object; visually inspect at a distance of 60 cm; compare with the
sample card of GB/T 250.
5.3 Determination of physical and chemical properties
5.3.1 Test the washing dimensional change rate in accordance with the
provisions of GB/T 8630; use GB/T 8629-2017, A-type standard washing
machine; set the washing program of 4G; for those that express washing by
hand, set the washing program of 4H; for the drying method, use program A.
Test the dimensional change rate after dry cleaning in accordance with FZ/T
80007.3; use the mild dry cleaning method. For the dimensional change rate
after washing, randomly select three finished products in the batch for testing;
take the average value of the three products as the test result. If the test result
includes shrinkage and elongation at the same time, take the average of the
two samples of shrinkage or elongation as the test result. For the dimensional
change rate of the woven fabrics, mark according to the corresponding
measuring part; for the dimensional change rate of knitted fabrics, take the coat
length and the chest circumference as the vertical and horizontal measuring
parts. Take the trousers length and the crotch (measure from the bottom of the
crotch in a direction perpendicular to the length of the trousers to the side of the
trousers) as the vertical and horizontal measuring parts; take the average value
of left and right crotch as the calculation basis in horizontal direction.
5.3.2 Test the lightfast color fastness in accordance with GB/T 8427-2008, of
which the exposure is exposed to phase-I according to method 3.
5.3.3 Test the fuzzing and pilling performance of the finished product in
accordance with the provisions of GB/T 4802.1-2008, in which the combed
woven fabrics and ordinary knitted fabrics are executed according to method E;
the loose-structure combed woven fabrics and carded woven fabrics are
executed according to method F; the rest of the woven fabrics are executed
according to Method D. Wool knitwear and wool-like knitwear are implemented
in accordance with the provisions of GB/T 4802.3-2008; turn the combed
product 14 400 r; turn the carded product 7 200 r.
5.3.4 Test the tear strength in accordance with GB/T 3917.2.
5.3.5 Test the burst strength in accordance with GB/T 19976-2005; the diameter
of the steel ball shall be (38 ± 0.02) mm.
5.3.6 For the appearance test method after washing, wash and dry the samples
by 5.3.1; then, combine with the requirements in Table 1, and assess according
to the assessment method in GB/T 21294.
5.3.7 For other items of physical and chemical properties, test in accordance
with GB/T 21294. Among them, chose the single-fiber lining for the arbitration
......

BASIC DATA
Standard ID GB/T 38134-2019 (GB/T38134-2019)
Description (Translated English) General technical specification for professional clothing
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard Y75
Classification of International Standard 61.020
Word Count Estimation 6,668
Date of Issue 2019-10-18
Date of Implementation 2020-05-01
Drafting Organization Jihua Group Co., Ltd., China National Garment Association, Jiangsu Hubao Group Co., Ltd., Shanghai Textile Group Testing Standards Co., Ltd., Shandong Yelia Garment Group Co., Ltd., Zhejiang George White Garment Co., Ltd., Caldenton Garment Co., Ltd. , Hengyuanxiang (Group) Co., Ltd., Shanshan Brand Operation Co., Ltd., Luomeng Group Co., Ltd., Yihe Co., Ltd., Heilan Home Co., Ltd., Foshan Nanhai NO.1 Industrial Co., Ltd., Shenzhen Yinger Fashion Group Co., Ltd., Hunan Unforgettable Clothing Co., Ltd.
Administrative Organization National Garment Standardization Technical Committee (SAC/TC 219)
Proposing organization China National Textile and Apparel Council
Issuing agency(ies) State Administration for Market Regulation, China National Standardization Administration