HOME   Cart(1)   Quotation   About-Us Tax PDFs Standard-List
Powered by Google-Search & Google-Books www.ChineseStandard.net Database: 189759 (25 Sep 2022)

GB/T 33686-2017 (GBT 33686-2017)

Chinese standards (related to): 'GB/T 33686-2017'
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)See DetailStatusGoogle Book
GB/T 33686-2017English90 Add to Cart 0--3 minutes. Auto immediate delivery. General rules for analytical and testing methods of coal mine water GB/T 33686-2017 Valid GBT 33686-2017


   
BASIC DATA
Standard ID GB/T 33686-2017 (GB/T33686-2017)
Description (Translated English) General rules for analytical and testing methods of coal mine water
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard Z23
Classification of International Standard 13.060.30
Word Count Estimation 6,688
Date of Issue 2017-05-12
Date of Implementation 2017-12-01
Quoted Standard GB/T 601; GB 3100; GB/T 3101; GB/T 6379.2; GB/T 6682; GB/T 8170; GB/T 8538; GB 3102.1; GB 3102.2; GB 3102.3; GB 3102.4; GB 3102.5; GB 3102.6; GB 3102.7; GB 3102.8; GB 3102.9; GB 3102.10; GB 3102.11; GB 3102.12; GB 3102.13
Drafting Organization Chongqing Geology and Mineral Resources Research Institute, Chongqing giant to construction (Group) Co., Ltd.
Administrative Organization National Coal Standardization Technical Committee (SAC/TC 42)
Proposing organization China Coal Industry Association
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, China National Standardization Administration Committee
Summary This standard specifies the general rules, samples, determination, solution and concentration of coal water quality, results, method precision, inspection record and test report. This standard applies to coal water quality analysis.


GB/T 33686-2017: PDF in English (GBT 33686-2017)
GB/T 33686-2017
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 13.060.30
Z 23
General Rules for Analytical and
Testing Methods of Coal Mine Water
ISSUED ON. MAY 12, 2017
IMPLEMENTED ON. DECEMBER 1, 2017
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of the People's Republic of China;
Standardization Administration of the People's Republic of
China.
3. No action is required - Full-copy of this standard will be automatically &
immediately delivered to your EMAIL address in 0~60 minutes.
Table of Contents
Foreword ... 3 
1 Application Scope ... 4 
2 Normative References ... 4 
3 General Rules ... 4 
4 Sample ... 5 
5 Determination ... 6 
6 Solutions and Their Concentrations ... 7 
7 Expression of Result ... 8 
8 Accuracy of Method ... 8 
9 Test Record and Test Report ... 8 
Foreword
This Standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This Standard was proposed by China Coal Industry Association.
This Standard shall be under the jurisdiction of the National Standardization Technical
Committee on Coal (SAC/TC 42).
The drafting organizations of this Standard. Chongqing Institute of Geology and
Mineral Resources, Chongqing Juneng Construction Group Co., Ltd.
The main drafters of this Standard. Zhu Zhenzhong, Tong Chunlin, Li Chengtao, Yang
Tianfu.
General Rules for Analytical and
Testing Methods of Coal Mine Water
1 Application Scope
This Standard specifies the general rules, sample, determination, solutions and their
concentration, expression of results, accuracy of method, test record and test report of
analysis and testing of coal mine water.
This Standard applies to the analysis and testing of coal mine water.
2 Normative References
The following referenced documents are indispensable for the application of this
document. For dated references, only the edition dated applies to this document. For
undated references, the latest edition of the referenced documents (including all
amendments) applies to this Part.
GB/T 601, Chemical Reagent – Preparations of Standard Volumetric Solutions
GB 3100, The International System of Units and Its Application
GB/T 3101, General Principles Concerning Quantities, Units and Symbols
GB 3102 (all parts), Quantities and Units
GB/T 6379.2, Accuracy (Trueness and Precision) of Measurement Methods and
Results – Part 2. Basic Method for the Determination of Repeatability and
Reproducibility of a Standard Measurement Method
GB/T 6682, Water for Analytical Laboratory Use – Specification and Test Methods
GB/T 8170, Rules of Rounding off for Numerical Values and Expression and
Judgement of Limiting Values
GB/T 8538, Methods for Examination of Drinking Natural Mineral Water
3 General Rules
3.1 The analytical methods listed in the analytical standard of coal mine water may
be used in arbitration analysis, validation of other analytical methods, standard
substance fixed value analysis and routine analysis.
5.4 Blank test
Blank test shall be carried out for chemical analysis while samples are tested. The
same flask of reagent prepared solution shall be used for blank test and sample test;
and meanwhile, they shall be carried out under the same procedures and conditions.
Blank values shall be deducted in the results calculated.
6 Solutions and Their Concentrations
6.1 Unless specified otherwise, the water used in the preparation of solutions and
process of analysis shall be grade-3 water specified in GB/T 6682.
6.2 All solutions using water as solvents are water solutions, usually abbreviation
solutions; solution using other liquids as solvents shall be named with the name of
solvents in front.
6.3 The frequently-used solution concentrations in standards are expressed as
follows.
a) the mass concentration of substance B. the mass of substance B divided by the
total volume of mixture. It is usually expressed in g/L, mg/L, mg/mL, μg/mL and
ng/mL;
b) the amount-of-substance concentration of substance B or the concentration of
substance B. the amount-of-substance of substance B divided by the total
volume of mixture. It is usually expressed in mol/L and mmol/L. The basic
element form of solute shall be indicated in actual applications;
c) the mass fraction of substance B. the ratio of the mass of solute to the mass of
solution (solute + solvent), i.e. the ratio of the mass of substance B to the mass
of mixture, which is usually expressed in %, 10-2, 10-4, 10-6 and 10-9;
d) the mass ratio. the ratio of two masses of a certain constituent in the mixtures. It
is expressed by “m1 + m2”, i.e. the reagents of mass m1 and mass m2 mixed up;
e) the volume fraction of substance B. the ratio of the volumes of pure substance B
and mixture under the same temperature and pressure, which is usually
expressed in mL/L or its fraction or multiple;
f) the volume ratio. the ratio of liquid reagent to solvent. It is expressed by “V1 + V2”,
i.e. the certain solution of volume V1 added to the solvent of volume V2.
6.4 The conversion factors in the method standard and the concentrations of
standard solutions shall be rounded off to four significant digits.
6.5 The calibration of solutions shall be as specified in GB/T 601.
a) test item name, record form management number, marking of page number and
total pages number;
b) test date;
c) test standard or method, and name and number of main apparatus used;
d) sample number in laboratory;
e) sample pretreatment (if necessary);
f) test data;
g) test result and calculation;
h) environmental conditions for test;
i) tester and reviewer;
j) other issues that need to be addressed or content that needs to be added (if
necessary).
9.2 Test report
Test report shall be prepared in accordance with the specified format, terms, symbols
and legal units of measurement, usually including the following content.
a) name, number, page number, total pages of report;
b) name and address of testing agency;
c) uniqueness identifier of report and clear identifier of report ending;
d) name and address of client (if necessary);
e) identification of standard or method used;
f) description and identification of state of sample;
g) sample submission date;
h) test date (if necessary);
i) test items and their result;
j) procedures for sample (if necessary);
k) signature or equivalent identification of main tester, reviewer and report approver;
l) report approval date;
......