GB/T 33584.2-2017 PDF English
US$90.00 · In stock · Download in 9 secondsGB/T 33584.2-2017: Seawater quality requirements and analysis methods for seawater cooling system -- Part 2: Determination of zinc Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 33584.2-2017 | English | 90 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Seawater quality requirements and analysis methods for seawater cooling system -- Part 2: Determination of zinc
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 33584.2-2017
GB/T 33584.2-2017: Seawater quality requirements and analysis methods for seawater cooling system -- Part 2: Determination of zinc
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT33584.2-2017
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 17.060; 13.060
Z 17
Seawater Quality Requirements
and Analysis Methods for Seawater
Cooling System – Part 2. Determination of Zinc
Issued on: MAY 12, 2017
Implemented on: DECEMBER 1, 2017
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration of PRC.
3. No action is required - Full-copy of this standard will be automatically &
immediately delivered to your EMAIL address in 0~60 minutes.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative References ... 4
3 Water Quality Requirements ... 4
4 Principle ... 5
5 Reagents and Materials ... 5
6 Apparatus ... 6
7 Analytical Procedures ... 7
8 Result Calculation ... 8
9 Precision ... 8
10 Precautions ... 8
Foreword
GB/T 33584 Seawater Quality Requirements and Analysis Methods for Seawater
Cooling System can be divided into the following 6 parts.
--- Part 1. Determination of Calcium and Magnesium;
--- Part 2. Determination of Zinc;
--- Part 3. Determination of Chloride;
--- Part 4. Determination of Sulfate;
--- Part 5. Determination of Dissolved Solids;
--- Part 6. Determination of Heterotrophic Bacteria.
This Part belongs to Part 2 of GB/T 33584.
This Part was drafted as per the rules specified in GB/T 1.1-2009.
This Part was proposed by State Oceanic Administration.
This Part shall be under the jurisdiction of National Technical Committee for
Standardization of Ocean (SAC/TC 283).
Drafting organizations of this Part. State Oceanic Administration Tianjin Institute Sea
Water Desalination and Multipurpose Utilization, National Quality Supervision and
Inspection Center for Seawater & Brackish Water Utilization Products, and Tianjin
Tanggu Zhonghai Anti-Corrosion Technology Development Company.
Chief drafting staffs of this Part. Cheng Guochen, Wu Dongxia, Yin Jianhua, Jiao
Chunlian, Liu Yu, Xu Na, and Xu Xu.
Seawater Quality Requirements
and Analysis Methods for Seawater
Cooling System – Part 2. Determination of Zinc
1 Scope
This Part of GB/T 33584 specifies the seawater cooling water quality requirements and
adopting spectrophotometry to determine the zinc in the seawater cooling water.
This Part is applicable to determine the zine content in seawater cooling water at
0.2mg/L ~ 5.0mg/L.
2 Normative References
The following documents are essential to the application of this document. For the
dated documents, only the versions with the dates indicated are applicable to this
document; for the undated documents, only the latest version (including all the
amendments) are applicable to this document.
GB/T 6682 Water for Analytical Laboratory Use – Specification and Test Methods
GB/T 12806 Laboratory Glassware – One-Mark Volumetric Flasks
GB/T 12807 Laboratory Glassware – Graduated Pipettes
GB/T 12808 Laboratory Glassware – One-Mark Pipettes
3 Water Quality Requirements
The major water quality of seawater cooling water shall conform to the provisions of
Table 1.
6.3 Colorimeter tube with stopper. capacity of 50mL.
6.4 One-mark volumetric flask. capacity of 50mL, 100mL and 1000mL, which shall
meet the requirements of Level-A specified in GB/T 12806.
6.5 Graduated pipette. capacity of 1mL, 2mL, 5mL and 10mL, which shall meet the
requirements Level-A specified in GB/T 12807.
6.6 One-mark pipette. capacity of 10mL, which shall meet the requirements of Level-
A specified in GB/T 12808.
7 Analytical Procedures
7.1 Drawing of standard curve
Use graduated pipette to absorb 0.0mL, 0.5mL, 1.0mL, 2.0mL, 3.0mL, 4.0mL, 5.0mL
of zinc standard solution (5.8), place them into 7 pieces of 50mL colorimeter tubes with
stopper, respectively; successively add 10mL of artificial seawater (5.9) with the similar
salinity as the to-be-tested sample; add water to near the scale line of 25mL.
Successively add, to the above colorimeter tube with stopper, 10.0mL of boric acid –
Potassium chloride – sodium hydroxide buffer solution (5.5) and 5.0mL of zinc reagent
ethanol solution (5.6); use water to dilute to the scale, shake evenly; the corresponding
zinc content is 0µg, 5µg, 10µg, 20µg, 30µg, 40µg, 50µg; stand for 10min. Adjust the
spectrophotometer wavelength to be 620nm; use 1cm cuvette, take standard solution
with zinc content of zero as the reference solution, to measure the absorbance.
Draw the standard curve with absorbance as the ordinate, zinc content (µg) as
abscissa.
7.2 Determination of zinc
Absorb 10mL of specimen by the one-mark pipette, place into 100mL beaker; add
0.5mL of sulfuric acid solution (5.3) and 1mL of ammonium persulfate solution (5.4);
add water till the solution volume is 25mL. Slightly boiling for 5min; take off; cool off to
the room temperature. Then add 1 drop of methyl orange solution (5.10); use the
sodium hydroxide solution (5.1) to turn the solution into yellow.
Transfer the above solution into 50mL colorimeter tube with stopper; add 10.0mL of
boric acid – potassium chloride – sodium hydroxide buffer solution (5.5); 5.0mL of zinc
reagent ethanol solution (5.6); use water to dilute to the scale, shake evenly.
Meanwhile do the blank test of artificial seawater reagent.
Place for 10min; adjust the spectrophotometer wavelength to be 620nm; use 1cm
cuvette, take standard solution with zinc content of zero as the reference solution, to
measure the absorbance; check out the zinc content (µg) from the standard curve.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 33584.2-2017 be delivered?Answer: The full copy PDF of English version of GB/T 33584.2-2017 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 33584.2-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 33584.2-2017_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 33584.2-2017 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of GB/T 33584.2-2017?A step-by-step guide to download PDF of GB/T 33584.2-2017_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 33584.2-2017".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|