Search result: GB/T 29863-2023 (GB/T 29863-2013 Older version)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 29863-2023 | English | 419 |
Add to Cart
|
4 days [Need to translate]
|
Pattern-making
| Valid |
GB/T 29863-2023
|
| GB/T 29863-2013 | English | 759 |
Add to Cart
|
4 days [Need to translate]
|
Pattern-making
| Obsolete |
GB/T 29863-2013
|
| Standard ID | GB/T 29863-2023 (GB/T29863-2023) | | Description (Translated English) | Pattern-making | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Y75 | | Classification of International Standard | 61.020 | | Word Count Estimation | 22,24 | | Date of Issue | 2023-08-06 | | Date of Implementation | 2024-03-01 | | Older Standard (superseded by this standard) | GB/T 29863-2013 | | Issuing agency(ies) | State Administration for Market Regulation, National Standardization Administration |
GB/T 29863-2023. Garment drawing
ICS 61.020
CCSY75
National Standards of People's Republic of China
Replace GB/T 29863-2013
Garment drawing
Published on 2023-08-06
2024-03-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Administration Committee
Preface
This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents"
Drafting.
This document replaces GB/T 29863-2013 "Garment Drawing". Compared with GB/T 29863-2013, except for structural adjustments and editorial changes,
In addition, the main technical changes are as follows.
a) Changed the requirements for drawing scale (see 4.2, 3.4 of the.2013 version);
b) Changed the legend of graphs and drawing methods, added the graph uses of "thick dotted line" and "thin dotted line", "dash-dotted line" and "dash-dotted line"
Merged into dotted and dashed lines, deleted double dotted and dashed lines, changed the requirements for line width (see 4.4, 3.5 of the.2013 version);
c) Added requirements for labeling units (see 5.1.2);
d) The basic rules for marking dimension values and drawing marking content have been changed, and illustrations have been deleted (see 5.1.4, 5.1.5,.2013 version)
4.1, 4.2.2, Figure 7);
e) Changed the "straight distance" and "horizontal distance" labeling methods to "linear labeling", changed the "slant distance" to "polyline labeling", and changed
Corresponding legend (see 5.2, 5.4,.2013 version 4.2.3, 4.3);
f) Added "arc dimension", "equal division dimension" and "angle dimension" labeling rules and corresponding legends (see 5.3, 5.5, 5.6);
g) The "special seam placement", "forward" and "strip installation position" drawing symbols are deleted (see Table 4 of the.2013 version);
h) Changed the "overlap", "one-way fold", "inverted fold", "meridian", "stop", "open dart", "folded dart", "separate dart" and "
The symbol forms of the drafting symbols of “stop”, “gather”, “pull apart”, “stretch”, “shrink”, “flat buttonhole” and “button” (see Table 3,.2013 edition
Table 3);
i) Changed "condensation" to "shirring", and changed the symbol form and description (see Table 3,.2013 version of Table 3);
j) Changed the names of the “equivalent sign”, “open dart”, “folded dart”, “separated dart” and “counterpoint mark” drafting symbols (see Table 3,.2013
Table 3 of the annual edition);
k) Changed the "Equal Bisector", "Equal Number", "Right Angle", "Overlap", "Split", "Open Dart", "One-way Pleating", "Folded Dart" and "Separated Dart"
"Tao", "stopping mouth", "lining", "stretching", "shrinking", "flat buttonhole", "button", "counterpoint mark", "snap button" and "hook button".
Ming (see Table 3, Table 3 of the.2013 version);
l) The drawing format, layout and font requirements have been changed and incorporated into the informative appendix (see Appendix A, 3.2, 3.3 and 3.6 of the.2013 version);
m) Added types of codes for main parts of clothing drawings (see Table D.1);
n) Change "back width" to "back width/back width", change "bottom collar height" to "bottom collar width", change "back of neck point" to "back of neck point", "chest
point" is changed to "chest height/chest point", "upper crotch (upper crotch) length" is changed to "upper crotch length/upper crotch length", "front chest width" is changed to "chest
"Width/front chest width", "elbow line" is changed to "sleeve elbow line", "front neck point" is changed to "front neck point", "crotch length" is changed to "inseam length/crotch"
"Bottom length" and "Knee line" are changed to "Knee circumference line/middle crotch line", "Horizontal shoulder width" is changed to "Shoulder width/Total shoulder width", and "Neck and shoulder point" is changed to
"Side neck point" and "shoulder end point" are changed to "shoulder point/acromion point" (see Table D.1, Table B.1 of the.2013 version);
o) Changed the codes of the main parts of the clothing drawing. "Sleeve Mountain", "Bust", "Back Width/Back Width", "Sleeve Fat", "Back Center Line", "Bottom Collar Width" and "Back
Clothing length" "Bust line" "Chest width/front chest width" "Cuffs" "Front center line" "Head circumference" "Shoulder width/total shoulder width" "Foot opening" "Lower bust line" "Turn over
The English name of "collar width" (see Table D.1, Table B.1 of the.2013 version);
p) Changed the codes of the main parts of the clothing drawing. "Sleeve Mountain", "Bust", "Back Width/Back Width", "Sleeve Fat", "Back Center Line" and "Bottom Collar Width"
Code names for "back length", "bust line", "chest width/front chest width", "cuffs", "sleeve elbow line", "front center line", "head circumference", "foot opening", and "lapel width"
(See Table D.1, Table B.1 of the.2013 version);
q) “Upper bust line” is deleted (see Table D.1, Table B.1 of the.2013 version);
r) Added "abdominal circumference", "crotch line", "ankle line", "underbust circumference", "abdominal circumference", "thigh circumference", "elbow circumference/sleeve elbow circumference", "pant length", "skirt length" and "back"
The names and codes of "long", "hip length", "sleeve mountain high", "front sleeve hole", "back sleeve hole", "front sleeve mountain" and "back sleeve mountain" (see Table D.1).
Please note that some content in this document may be subject to patents. The publisher of this document assumes no responsibility for identifying patents.
This document is proposed by the China Textile and Apparel Industry Federation.
This document is under the jurisdiction of the National Apparel Standardization Technical Committee (SAC/TC219).
This document was drafted by. Donghua University, Jiangsu Hubao Group Co., Ltd., Shanghai University of Engineering and Technology, Shanghai Textile Group Testing Standards
Co., Ltd., Jinjiang Standard & Poor Quality Technical Services Co., Ltd., Hengyuanxiang (Group) Co., Ltd., Heilan House Brand Management Co., Ltd., Hebei Ben
Fa Garment Co., Ltd., Hangzhou Zhongfu Science and Technology Innovation Research Institute Co., Ltd., Qingdao Kute Intelligent Co., Ltd., Beijing Product Quality Supervision and Inspection
Research Institute.
The main drafters of this document. Zhao Hui, Zhou Shifei, Yuan Rong, Yang Xiuyue, Ma Nini, Wang Xingfang, He Aifang, Yue Chunming, Li Juan, Liu Bing,
Yan Meili, Han Jun.
The previous versions of this document and the documents it replaces are as follows.
---First published as GB/T 29863-2013 in.2013;
---This is the first revision.
Garment drawing
1 Scope
This document specifies the requirements for garment drawing, sizing rules and garment drawing symbols.
This document is applicable to clothing drawing in the process of clothing design, production, technology, teaching and trade.
2 Normative reference documents
The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, the dated quotations
For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to
this document.
GB/T 10609.3 Folding method of technical drawing reproduction drawings
GB/T 14689 Technical drawing drawing format and format
GB/T 14691 Technical drawing fonts
GB/T 15557 Clothing terminology
GB/T 16160 Dimension definitions and methods for human body measurement for clothing
3 Terms and definitions
The terms and definitions defined in GB/T 15557 apply to this document.
4 requirements
4.1 Basic requirements
Drawings should comply with the provisions of GB/T 10609.3, GB/T 14689 and GB/T 14691.
4.2 Cartographic scale
4.2.1 The mapping scale classification should comply with the provisions of Table 1.
Table 1
Batch description
Original value ratio 1.1
Reduction ratio 1.2 1.3 1.4 1.5 1.6 1.10
Magnification ratio 1.5.1 2.1
4.2.2 Drawings on the same drawing should use the same scale, and the scale should be filled in the title block; when using different scales, each zero should be
The proportion is marked on the upper left corner of the component, such as. 1.1, 1.2, etc.
4.2.3 The proportions of clothing style drawings are not restricted by the above regulations.
......
GB/T 29863-2013
Pattern-making
ICS 61.020
Y75
National Standards of People's Republic of China
Drawing Clothing
Issued on. 2013-11-12
2014-05-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
The standard proposed by China Textile Industry Association.
This standard by the National Standardization Technical Committee apparel (SAC/TC219) centralized.
This standard is mainly drafted by. Donghua University, Shanghai Institute of clothing, Heng Yuan Xiang (Group) Co., Ltd.
The main drafters. Zhang Wenbin, Zhu Jie, Fu Wei, Zhu Dong, Shi Qin, Qiu Hongsheng, Du Yan Bing, Cai Yunfeng, Zhao Jialu.
Drawing Clothing
1 Scope
This standard specifies requirements for clothing drawing, dimensioning rules and mapping symbols technical features.
This standard applies to clothing design, production, technology, education and trade and its associated fields.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
Folding method GB/T 10609.3 Technical drawings of
GB/T 14689 Technical drawings and drawings format format
GB/T 14691 Technical Drawing Font
GB/T 15557 Clothing term
GB/T 16160 clothing parts and anthropometric methods
3 Requirements
3.1 Basic requirements
The basic requirements of this standard technical drawings by GB/T 10609.3, GB/T 14689 and GB/T 14691 regulations.
3.2 drawing format
3.2.1 Common format drawings
Drawing common format as shown in Table 1.
Table 1 millimeters
Format code A0 A1 A2 A3 A4
B × L 841 × 1189 594 × 841 420 × 594 297 × 420 210 × 297
c 10 10 10 5 5
a 25 25 25 25 25
NOTE. B is wide drawing; L long drawings; c for the border drawing; a drawing for the binding edge.
3.2.2 Special drawing format
Clothing drawing in exceptional circumstances, when drawing common format specification is not enough to use, the table A0 or A1 format or both sides of a unilateral
Lengthened, the amount thereof shall be extended A3 size corresponding to the size of the whole side-fold increase (Figure 1).
NOTE. A3 size refers to the corresponding side of the long or short side, if you add the long side should be 420mm; if you add the length of the edge should be 297mm.
......
|