GB/T 18877-2020 (GB/T18877-2020, GBT 18877-2020, GBT18877-2020) & related versions
Buy with any currencies (Euro, JPY, KRW...): GB/T 18877-2020 Preview this PDF: GB/T 18877-2020
GB/T 18877-2020: PDF in English (GBT 18877-2020)
GB/T 18877-2020
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 65.080
G 21
Replacing GB/T 18877-2009
Organic inorganic compound fertilizer
ISSUED ON: NOVEMBER 19, 2020
IMPLEMENTED ON: JUNE 01, 2021
Issued by: State Administration for Market Regulation;
Standardization Administration of the People's Republic of
China.
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative references ... 5
3 Terms and definitions ... 6
4 Technical requirements ... 6
5 Sampling ... 8
6 Test methods ... 9
7 Inspection rules ... 16
8 Marks and quality certificate... 17
9 Packaging, transportation and storage ... 18
Organic inorganic compound fertilizer
1 Scope
This Standard specifies the terms and definitions, technical requirements,
sampling, test methods, inspection rules, marks and quality certificates,
packaging, transportation and storage for organic inorganic compound fertilizer.
This Standard is applicable to the organic inorganic compound fertilizer that is
made by organic materials such as human and livestock manure, animal and
plant residues, scraps of agricultural products processing, through fermentation
and harmless treatment, added with inorganic fertilizer.
2 Normative references
The following referenced documents are indispensable for the application of
this document. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any
amendments) applies.
GB/T 6679, General rules for sampling solid chemical products
GB/T 8170, Rules of rounding off for numerical values & expression and
judgement of limiting values
GB/T 8569, Packing of solid chemical fertilizers
GB/T 8573, Determination of available phosphorus content for compound
fertilizers
GB/T 8576, Determination of free water for compound fertilizers - Vacuum
oven method
GB/T 8577, Determination of free water for compound fertilizers - Karl
Fischer method
GB/T 15063-2020, Compound fertilizer
GB/T 17767.1, Determination of organic-inorganic compound fertilizers - Part
1: Total nitrogen content
GB/T 17767.3, Determination of organic-inorganic compound fertilizers - Part
3: Total potassium content
GB 18382, Fertilizer marking - Presentation and declaration
GB/T 19524.1, Determination of fecal coliforms in fertilizers
GB/T 19524.2, Determination of mortality of ascarid egg in fertilizers
GB/T 22923-2008, Determination of nitrogen, phosphorus and potassium for
fertilizers by auto analyzer
GB/T 22924, Determination of biuret content for compound fertilizers
(complex fertilizers)
GB/T 23349, Determination of arsenic, cadmium, chromium, lead and
mercury contents for fertilizers
GB/T 24890-2010, Determination of chloride content for compound fertilizers
GB/T 24891, Determination of particle size for compound fertilizers
GB 38400, Limitation requirements of toxic and harmful substance in
fertilizers
HG/T 2843, Chemical fertilizer Products-standard volumetric, standard,
reagent and indicator solutions for chemical analysis
NY/T 1117, Water - Soluble fertilizers - Determination of calcium, magnesium,
sulphur and chlorine content
NY/T 1972, Water-soluble fertilizers - Determination of sodium, selenium,
silicon content
NY/T 1978, Fertilizers - Determination of mercury, arsenic, cadmium, lead
and chromium content
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1 organic inorganic compound fertilizer
A compound fertilizer containing a certain amount of organic fertilizer.
NOTE: Organic inorganic compound fertilizer includes organic inorganic mixed fertilizer.
4 Technical requirements
4.1 Appearance: Granular or strip product, without mechanical impurities.
divider or quarter method. Reduce into two portions. Subpack into two clean,
dry glass bottles or plastic bottles with ground stoppers. Seal and label them,
indicating manufacturer name, product name, product category, batch number
or production date, sampling date and name of the person who took the sample.
One bottle is for product inspection. The other is stored for two months, for
future inspection.
6 Test methods
WARNING - Potassium dichromate and its solution in the reagent are
oxidizing. Sulfuric acid and its solutions, hydrochloric acid, silver nitrate
solution and sodium hydroxide solution are corrosive. Related operations
shall be carried out in a fume hood. This Standard does not point out all
possible safety issues. The user is responsible for taking appropriate
safety and health measures and ensuring compliance with relevant
national regulations.
6.1 General provisions
The preparation of reagents, water and solutions used in this Standard, when
specifications and preparation methods are not specified, shall be in
accordance with HG/T 2843. Except for appearance and particle size, two test
materials are tested in parallel.
6.2 Specimen preparation
Take a bottle of sample from 5.2. After multiple reductions, take out about 100g.
Grind quickly to pass the 0.50mm or 1.00mm aperture test sieve (if the sample
is wet or difficult to crush, it can be ground to pass the 2.00mm aperture test
sieve). Mix well. Collect in a drying bottle for determination of content. The
remaining samples are used to determine the appearance, particle size,
mortality of roundworm eggs, and the number of fecal coliforms.
6.3 Appearance
Use visual inspection method.
6.4 Organic matter content
6.4.1 Principle
Use a certain amount of potassium dichromate solution and sulfuric acid. Under
heating, the organic carbon in the organic-inorganic compound fertilizer is
oxidized, and the remaining potassium dichromate solution is titrated with
ferrous sulfate (or ferrous ammonium sulfate) standard titration solution. Do a
blank test at the same time. According to the consumption of oxidant before and
V3 - In the blank test, the volume of ferrous sulfate (or ferrous ammonium sulfate)
standard titration solution consumed, in milliliters (mL);
V4 - When measuring the test material, the volume of ferrous sulfate (or ferrous
ammonium sulfate) standard titration solution consumed, in milliliters (mL);
c2 - The concentration of ferrous sulfate (or ferrous ammonium sulfate) standard
titration solution, in moles per liter (mol/L);
0.003 - The molar mass of a quarter of carbon, in grams per millimole (g/mmol);
1.5 - The oxidation correction factor;
w1 - The chloride ion content in the specimen measured according to 6.11, %;
1/12 - The mass fraction of organic carbon equivalent to 1% chloride ion;
1.724 - The empirical conversion coefficient between organic carbon and
organic matter;
m0 - The mass of test material, in grams (g).
The calculation result is expressed to one decimal place. Take the arithmetic
mean of the parallel measurement results as the measurement result.
6.4.6 Precision
The absolute difference of the parallel determination results is not more than
1.0%. The absolute difference between the results of different laboratories is
not more than 1.5%.
6.5 Total nutrient content
6.5.1 Determination of total nitrogen content
Weigh the sample from the samples after milling in 6.2. Conduct according to
the provisions of GB/T 17767.1 or 3.1 of GB/T 22923-2008. The method of GB/T
17767.1 is the arbitration method.
6.5.2 Determination of effective phosphorus pentoxide content
Weigh the sample from the samples after milling in 6.2. Conduct according to
Annex A of GB/T 15063-2020 or GB/T 8573. Take Annex A of GB/T 15063-2020
as the arbitration method.
6.5.3 Determination of total potassium oxide content
Weigh the sample from the samples after milling in 6.2. Conduct according to
the provisions of GB/T 17767.3.
6.7.6 Precision
The absolute difference of the parallel determination results is not more than
0.10pH.
6.8 Determination of particle size
According to GB/T 24891.
6.9 Determination of the mortality of roundworm eggs
According to GB/T 19524.2.
6.10 Determination of fecal coliform group
According to GB/T 19524.1.
6.11 Determination of chloride ion content
6.11.1 Volumetric method
6.11.1.1 Principle
The specimen is in a slightly acidic solution (if the filtrate is colored after the
sample solution extracted with boiling water is filtered, mix the specimen and
the Eschar mixed reagent, and burn to remove combustibles and convert
chlorine to chloride). Add excess silver nitrate solution to convert chloride ions
into silver chloride precipitation. Use dibutyl phthalate to coat the precipitate.
Use ferric ammonium sulfate as indicator. Use ammonium thiocyanate standard
titration solution to titrate the remaining silver nitrate.
6.11.1.2 Reagents or solutions
6.11.1.2.1 All reagents and materials in Chapter 4 of GB/T 24890-2010.
6.11.1.2.2 Silver nitrate solution: 10g/L.
6.11.1.2.3 Activated carbon.
6.11.1.2.4 Eschar mixed reagent: Mix magnesium oxide and anhydrous sodium
carbonate at a mass ratio of 2:1. Grind to be less than 0.25mm. Mix well.
6.11.1.3 Instruments and equipment
6.11.1.3.1 Laboratory equipment is usually used.
6.11.1.3.2 Box-type resistance furnace: The temperature can be controlled at
(500±20)°C.
Weigh the sample from the samples after milling in 6.2. Conduct according to
NY/T 1972.
6.14 Determination of biuret content
Weigh the sample from the samples after milling in 6.2. Conduct according to
the high-performance liquid chromatography in GB/T 22924.
7 Inspection rules
7.1 Inspection category and inspection items
Product inspection includes exit-factory inspection and type inspection.
Appearance, organic matter content, total nutrient content, moisture, particle
size, pH, chloride ion content, and sodium ion content are exit-factory
inspection items. Type inspection items include all items in Chapter 4. Type
inspection is carried out in one of the following situations:
- After formal production, if there are major changes in raw materials and
processes, which may affect the quality of the product;
- During normal production, type inspection is carried out according to the
cycle. Ascaris egg mortality, number of fecal coliforms, biuret, arsenic,
cadmium, lead, chromium, mercury shall be inspected at least once every
six months. Other items in 4.3 are inspected at least once every two years;
- When production is resumed after a long-term stop;
- When the government regulatory agency puts forward the need for type
inspection.
7.2 Batching
The products are inspected in batches. Take one- or two-days' output as a batch.
The maximum batch size is 500t.
7.3 Result determination
7.3.1 The conformity determination for product quality indicators in this
Standard shall use "Rounding value comparison method" in GB/T 8170.
7.3.2 The manufacturer shall carry out exit-factory inspection and type
inspection in accordance with the requirements of this Standard. When all the
inspection items meet the requirements of this Standard, the batch of products
shall be deemed conforming.
7.3.3 If one of the results of the exit-factory inspection or type inspection
......
| Standard ID | GB/T 18877-2020 (GB/T18877-2020) | | Description (Translated English) | Organic inorganic compound fertilizer | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | G21 | | Classification of International Standard | 65.080 | | Word Count Estimation | 11,121 | | Date of Issue | 2020-11-19 | | Date of Implementation | 2021-06-01 | | Older Standard (superseded by this standard) | GB/T 18877-2009 | | Drafting Organization | Shanghai Research Institute of Chemical Industry Co., Ltd., Shenzhen Batian Ecological Engineering Co., Ltd., Hunan Golden Leaf Zhongwang Technology Co., Ltd., Shandong Lvbaozhu Biological Fertilizer Co., Ltd., Shanghai Institute of Chemical Industry Testing Co., Ltd., Shanghai Huanqiu Engineering Co., Ltd. | | Administrative Organization | National Adhesive Standardization Technical Committee (SAC/TC 185) | | Regulation (derived from) | National Standard Announcement No. 26 of 2020 | | Proposing organization | China Petroleum and Chemical Industry Federation | | Issuing agency(ies) | State Administration for Market Regulation, National Standardization Administration |
|