Standard Briefing:Stadard ID: GB/T 18828-2022
Stadard Title: Horology - Diver watches
Price (USD): 394
Lead day (Deliver True-PDF English version): 4 days [Need to translate]
Status: ValidEvolution and Historical Versions:
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 18828-2022 | English | 394 |
Add to Cart
|
4 days [Need to translate]
|
Horology - Diver watches
| Valid |
GB/T 18828-2022
|
| GB/T 18828-2013 | English | 394 |
Add to Cart
|
3 days [Need to translate]
|
Diver watches
| Obsolete |
GB/T 18828-2013
|
| GB/T 18828-2002 | English | 399 |
Add to Cart
|
3 days [Need to translate]
|
Diver watches
| Obsolete |
GB/T 18828-2002
|
PDF Samples:
Basic Data: | Standard ID | GB/T 18828-2022 (GB/T18828-2022) | | Description (Translated English) | Horology - Divers�� watches | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Y11 | | Classification of International Standard | 39.040.10 | | Word Count Estimation | 18,135 | | Date of Issue | 2022-11-08 | | Date of Implementation | 2023-06-01 | | Older Standard (superseded by this standard) | GB/T 18828-2013 | | Issuing agency(ies) | State Administration for Market Regulation, National Standardization Management Committee | Contents, Scope, and Excerpt:GB/T 18828-2022
Horology - Divers' watches
ICS 39.040.10
CCSY11
National Standards of People's Republic of China
Replacing GB/T 18828-2013
Watch diving watch
(ISO 6425.2018, IDT)
Released on 2022-11-08
2023-06-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Management Committee
foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules for Standardization Documents"
drafting.
This document replaces GB/T 18828-2013 "Diving Watch". Compared with GB/T 18828-2013, except for structural adjustments and editorial changes
In addition, the main technical changes are as follows.
a) Changed the "Scope" and included the "Naming" chapter of the.2013 edition after revision (see Chapter 1, Chapter 1 and Chapter 1 of the.2013 edition
Chapter 4);
b) Changed "Terms and Definitions" (see Chapter 3, Chapter 3 of the.2013 edition);
c) The "Requirements" and "Test Methods" chapters of the.2013 edition are merged into the same chapter "Requirements and Test Methods", and the "Practice
"International significance" chapter was revised and included (see Chapter 4, Chapter 5, Chapter 6 and Chapter 7 of the.2013 edition);
d) Added "overview" in "requirements and test methods", including "temperature", "visual inspection", "tested product configuration", "practical significance", "potential
Water time indicator" and "type inspection and 100% full inspection", of which "visual inspection" "actual meaning" and "diving time indication
Device" and "type inspection and 100% full inspection" were revised and incorporated from the relevant content of the.2013 edition (see 4.1,.2013 edition
Chapter 5, 6.1, 7.1, 7.2 and 7.3);
e) Changed the "visibility" requirements and test methods (see 4.2, 6.2 of the.2013 edition);
f) The requirements and test methods for "antimagnetic performance" have been changed (see 4.3, 6.3 of the.2013 edition);
g) Added "temperature cycle" and "salt spray test (attached table)" in "requirements and test methods" (see 4.4, 4.5);
h) The requirements and test methods for "shockproof performance" have been changed (see 4.6 and 4.8, 6.4 of the.2013 edition);
i) The requirements and test methods for "salt water resistance" are deleted (see 6.5, 7.3.3 of the.2013 edition);
j) Added "Waterproof performance" in "Requirements and test methods", including "Functional devices in shallow water", "Crowns and other setting devices
Water resistance when force is applied", "Functional devices under excess water pressure" and "Water resistance under excess water pressure", some of the contents are from the.2013 edition.
Relevant content was revised and included (see 4.7, 6.6, 6.7.2, 6.10, 7.3.4, 7.3.6 and 7.3.7 of the.2013 edition);
k) The requirements and test methods of "Anti-external force performance of accessories" have been changed (see 4.9, 6.7.1 and 7.3.1 of the.2013 edition);
l) Delete the requirements and test methods of "thermal shock resistance" (see 6.8, 7.3.5 of the.2013 edition);
m) Changed the "condensation test" (see 4.10, 7.3.8 of the.2013 edition);
n) Changed the "mark" (see Chapter 5, Chapter 8 of the.2013 edition);
o) Added "use and maintenance recommendations" (see Chapter 6 and Appendix D);
p) Added the normative appendix "Saturation Diving Diving Table", including "Overview", "Requirements and tests for operation under helium overpressure (type inspection
inspection)" and "Mark", modified from the relevant content of the.2013 edition (see Appendix A, 6.11 and Appendix A of the.2013 edition);
q) An informative appendix "Airtightness under superpressure" has been added, which is revised from the relevant content of the.2013 edition (see Appendix B, the.2013 edition
6.9 and 7.3.2);
r) Added an informative appendix "Diving Chart" (see Appendix C).
This document is equivalent to ISO 6425.2018 "Watch and Diving Watches".
Please note that some contents of this document may refer to patents. The issuing agency of this document assumes no responsibility for identifying patents.
This document is proposed by China National Light Industry Council.
This document is under the jurisdiction of the National Standardization Technical Committee of Watches and Clocks (SAC/TC160).
This document is drafted by. Xi'an Light Industry Watch Research Institute Co., Ltd., Tianwang Electronics (Shenzhen) Co., Ltd., Shenzhen Titan Clock Watch
Technology Co., Ltd., Shenzhen Fiyta Technology Development Co., Ltd., Zhuhai Rossini Watch Industry Co., Ltd., Tianjin Seagull Watch Technology Co., Ltd.
Division, Shenzhen Geya Watch Industry Co., Ltd., Yibo Boutique (Shenzhen) Co., Ltd., Zhejiang Excellence Electronics Co., Ltd., Shishi Suga Electronics Co., Ltd.
Company, Zhangzhou Hengli Electronics Co., Ltd., Zhangzhou Yingzi Watch Co., Ltd., Anhui Huami Information Technology Co., Ltd., Shenzhen Intertek Quality
Technical Service Co., Ltd., Shenzhen Guzun Watch Co., Ltd., Dongguan Deli Watch Co., Ltd.
The main drafters of this document. Wang Yanmin, Zhao Yan, Zhang Kelai, Ma Tao, He Guangxian, Chen Bin, Zhu Yinglin, Liang Jia, Guo Xingang, Liang Xinxin, Li Lili,
Liu Yong, Sha Linkai, Yang Li, Luo Xuzhi, Lu Xiangyan, Xu Mingzhang, Li Ping, Zhang Jingang, Shao Yueming, Lan Liping, Zhuang Manyi, Wang Wei, Wang Huan, Fu Yi,
Qi Xiange, Wang Zesheng, Liang Weihao, Huang Zhirong.
The release status of previous versions of this document and the documents it replaces are as follows.
---It was first published as GB/T 18828-2002 in.2002 and revised for the first time in.2013;
--- This is the second revision.
Watch diving watch
1 Scope
This document specifies the requirements and test methods for diving watches and saturation diving watches for deep water diving.
This document applies to dives capable of withstanding a depth of at least 100m and equipped with a protective measuring system to indicate visibility in darkness
diving watch.
In addition, this document identifies the marks used by the licensed manufacturer.
2 Normative references
The contents of the following documents constitute the essential provisions of this document through normative references in the text. Among them, dated references
For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to
this document.
GB/T 26716-2011 Clocks Antimagnetic Watches (ISO 764.2002, IDT)
GB/T 30106-2013 Waterproof watches for watches and clocks (ISO 22810.2010, IDT)
GB/T 38022-2019 Clocks and Shockproof Watches (ISO 1413.2016, IDT)
GB/T 40359-2021 Test methods and requirements for photoluminescent coatings on timing instruments (ISO 17514.2004, IDT)
spraytests)
Note. GB/T 10125-2021 Artificial atmosphere corrosion test salt spray test (ISO 9227.2017, MOD)
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
Scuba divingSCUBAdiving
Underwater diving in which divers breathe underwater using self-contained breathing apparatus (scuba).
3.2
saturation diving
Diving techniques designed to reduce the risk of decompression sickness when divers operate in deep water for extended periods of time.
NOTE. In saturation diving, the diver lives in a pressurized environment corresponding to the depth of the dive, which can be a hyperbaric chamber. This dive can be maintained for several
Weekly decompression to surface pressure only once at the end of the diver's mission. By limiting the number of decompression times in this way, the decompression rate can be greatly reduced.
disease risk.
3.3
Diving watch divers'watch
A watch designed to withstand scuba diving.
3.4
A dive watch designed to withstand saturation diving.
......
GB/T 18828-2013
Divers'watches
ICS 39.040.10
Y11
National Standards of People's Republic of China
Replacing GB/T 18828-2002
Diving watch
(ISO 6425.1996, IDT)
Issued on. 2013-12-17
2014-12-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
Accordance with the standards GB/T 1.1-2009. Drafting Rules "Standardization Guide Part 1 standard structure and preparation of" given.
This standard replaces GB/T 18828-2002 "dive watch", compared with the GB/T 18828-2002, the main editorial changes are as follows.
--- Increased use of diving under the table of contents in a mixed gas environment "Scope" section (see Chapter 1);
--- Update normative references (see Chapter 2);
--- In Appendix A of the Terms and Definitions move text (see 3.2);
--- In order to improve the operability of the test, an increase of notes condensation test (see 7.3.8 in Notes 1 to 3).
This standard uses the translation method identical with ISO 6425.1996 "diving watch."
Correspondence between the consistency of the standards of international documents and normative references of the following documents.
--- GB/T 26716-2011 "watch anti-magnetic watch" (ISO 764.2002, IDT)
--- GB/T 2828.1-2003 "Sampling procedures for inspection - Part 1. batch inspection by acceptance quality limit (AQL) retrieval pumping
Sample Program "(ISO 2859-1.1999, IDT)
--- GB/T 2828.2-2008 "Sampling procedures for inspection - Part 2. Press the limiting quality (LQ) for isolated lot inspection retrieve pumping
Sample program "(ISO 2859-2. 1985, NEQ)
--- GB/T 2828.3-2008 "Sampling procedures for inspection Part 3. skip-lot sampling procedures" (ISO 2859-3.2005, IDT)
--- QB/T 1898-1993 "Watch Earthquake Watch" (ISO 1413. 1984, IDT)
This standard made the following editorial changes.
--- In Appendix A of the Terms and Definitions move text (see 3.2).
--- In order to improve the operability of the test, an increase of notes condensation test (see 7.3.8 in Notes 1 to 3).
The standard proposed by China National Light Industry Council.
This standard by the National Standardization Technical Committee clocks (SAC/TC160) centralized.
This standard was drafted. Watch Institute of Light Industry, Tianjin Seagull Watch Group Co., Ltd., Shenzhen Renault Watch Co., Ltd., Shenzhen
FIYTA Technology Development Co., Ltd. Fujian Rui Da Precision.
The main drafters of this standard. Kim Young-sook, Lili, Zhanxi Chau, high lian, Zhang Ming, Jingjiang Bo, Jiang Xin.
This standard supersedes the previous editions are.
--- GB/T 18828-2002.
Diving watch
1 Scope
This standard specifies the requirements and test methods for diving watches. Requirements and test when scuba diving in mixed gas environments dive tables
Test methods in Appendix A.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
ISO 764 watch anti-magnetic watch (Horology-Antimagneticwatches)
ISO 1413 Watch shockproof watch (Horology-Shock-resistantwatches)
ISO 2859-1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan
(Samplingproceduresforinspectionbyattributes-Part 1. Samplingplansindexedbyacceptablequal-
itylevel (AQL) forlot-by-lotinspection)
ISO 2859-2 Sampling procedures for inspection - Part 2. Press limiting quality LQ retrieved isolated batch inspection sampling plan
(Samplingproceduresforinspectionbyattributes-Part 2. Samplingplansindexedbylimitingquality
(LQ) forisolatedlotinspection)
ISO 2859-3 Sampling procedures for inspection - Part 3. skip-lot sampling procedures (Samplingproceduresforinspection
byattributes-Part 3. Skip-lotsamplingprocedures)
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
Diving watch diver'swatches
Capable of at least 100m deep dive into the water, by operating an adjustment device to control the time of the watch.
Note. The following "dive watch" referred to as "watch."
3.2
A mixed gas environment using dive tables diver'swatchformixed-gasdiving
At least 100m deep water diving waterproof, and is not breathing mixed gas overpressure environmental impacts watch.
4 Name
Diving depth of 100m and above, marked "dive table" or other similar terminology watch should satisfy the provisions of Chapter 6, the minimum
Claim.
5 practical significance
The watch will not be damaged in the following simulated conditions after the test and can continue to run.
......
|