|
US$189.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 15872-2013: Power supply interface for semiconductor equipment
Status: Valid GB/T 15872: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 15872-2013 | English | 189 |
Add to Cart
|
3 days [Need to translate]
|
Power supply interface for semiconductor equipment
| Valid |
GB/T 15872-2013
|
| GB/T 15872-1995 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Power supply interface for semiconductor equipment
| Obsolete |
GB/T 15872-1995
|
PDF similar to GB/T 15872-2013
Basic data | Standard ID | GB/T 15872-2013 (GB/T15872-2013) | | Description (Translated English) | Power supply interface for semiconductor equipment | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | L23 | | Classification of International Standard | 31.220.10 | | Word Count Estimation | 8,899 | | Older Standard (superseded by this standard) | GB/T 15872-1995 | | Quoted Standard | GB/T 156-2007; GB 1002-2008; GB 1003-2008; GB 2099.1-2008; GB/T 5013.1-2008; GB/T 5013.4-2008; GB/T 5013.5-2008; GB/T 11918-2001; GB/T 11919-2001 | | Regulation (derived from) | National Standards Bulletin No. 25 of 2013 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the class of semiconductor device power supply interface, select electrical accessories, wire and cable requirements. This standard applies to semiconductor device power connector. | GB/T 15872-2013: Power supply interface for semiconductor equipment---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Power supply interface for semiconductor equipment
ICS 31.220.10
L23
National Standards of People's Republic of China
Replacing GB/T 15872-1995
Semiconductor Equipment Power Interface
Issued on. 2013-12-17
2014-05-15 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
1 Scope 1
2 Normative references 1
3 Terms and definitions
Category 4 power and the rated voltage electrical annex 2
Electrical accessories 3 5
5.1 Principle 3 electrical accessories selection
5.2 pairs of terminals in claim 3
5.3 cable or cord 3
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard replaces GB /"Power Semiconductor Device Interface", compared with the GB/T 15872-1995, major changes in T 15872-1995
as follows.
--- On the standard "semiconductor device" (semiconductorequipment) defines the name;
--- References GB/T 11918-2001, GB 2099.1-2008 and GB/T 156-2007 part of the terms and definitions used in the present
Standard terms and definitions;
--- Said the original standard plug and socket connectors and couplers for the power supply, according to GB 2099.1-2008 and GB/T 11918-
2001 standard specifies renamed electrical accessories;
--- GB/T 11918-2001 provisions in a variety of electrical accessories rated voltage and rated current preferred values, but according to our current
The actual supply voltage single phase 220V, 50Hz and three phase 380V, 50Hz, with GB 2099.1-2008 and order
GB 1002-2008, GB 1003-2008 standard agreement, confirmed.
a) Rated voltage single-phase power circuits used for electrical accessories for 250V, three-phase power supply circuit used in the amount of electrical accessories
Constant voltage of 440V;
b) for household and similar purposes plugs and sockets rated single-phase current preferred series 6A, 10A and 16A;
c) for household and similar uses three-phase plug and socket rated current of the preferred series 16A, 25A and 32A;
d) industrial plug and socket coupler is preferably rated series 16A, 32A, 63A and 125A.
--- GB/T 15872-1995 specified device's power cable should be rubber insulated cables, GB 2099.1-2008 prescribed home
Plug and socket with similar purposes and is in line with PVC insulated cables GB/T 5023-2008 and in accordance with the provisions of
GB/T 5013-2008 rubber insulated cables provisions exist, while industrial use only plug sockets and couplers conform
GB/T 5013-2008 specified rubber insulated cables.
Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents.
The standard proposed by the Ministry of Industry and Information Technology of the People's Republic of China.
This standard by the National Standardization Technical Committee Electronic Measuring Instruments (SAC/TC153) centralized.
This standard was drafted. People's Liberation Army Air Force Radar Academy, Industry and Information Technology Ministry of Electronics Industry Standardization Institute.
The main drafters of this standard. ZHU Zhong Nepal, Qi Ying Chuan Mei Changyi, Qi Cheng Chao, Tao Xuefeng, Huang Yinghua, Qian Li, Cao Ling.
This standard replaces the standards previously issued as follows.
--- GB/T 15872-1995.
Semiconductor Equipment Power Interface
1 Scope
This standard specifies the categories of power semiconductor devices power interface, select electrical accessories, wire and cable requirements.
This standard applies to semiconductor device power connector.
2 Normative references
The following documents for the application of this document is essential, dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 156-2007 standard voltage
GB 1002-2008 Household and similar single-phase plug and socket type, basic parameters and dimensions
GB 1003-2008 Household and similar three-phase plug and socket type, basic parameters and dimensions
GB 2099.1-2008 plug socket for household and similar purposes - Part 1. General requirements
GB/T 5013.1-2008 rated voltage of 450/750V and below rubber insulated cables - Part 1. General requirements
GB/T 5013.4-2008 rated voltage of 450/750V and below rubber insulated cables Part 4. Cords and flexible cables
GB/T 5023.5-2008 rated voltage of 450/750V and below PVC insulated cables Part 5. Flexible cables (cords)
GB/T 11918-2001 industrial plug and socket couplers - Part 1. General requirements (idt IEC 60309-1.1999)
GB/T 11919-2001 industrial plug and socket coupling - Part 2. With pin and sleeve size interchangeable electrical accessories
Requirements
3 Terms and Definitions
GB/T 11918-2001, GB 2099.1-2008 and GB 156-2007 defined by the following terms and definitions apply to this document.
NOTE. The following terms and definitions in the plugs and sockets, cable couplers and appliance couplers, referred to as electrical accessories, its use is shown in Figure 1.
3.1
Semiconductor Equipment semiconductorequipment
Equipment from power semiconductor devices and other components of the composition and its input power supply for the 50Hz AC.
3.2
Socket socket-outlet
Predetermined and fixed wiring installed with or installed in equipment that part.
Note. The socket can also be installed in the output circuit isolation transformer inside.
3.3
Plug plug
Or devices connected to a flexible cable connector into a whole or scheduled directly with this portion of the flexible cable connections.
3.4
Connector connector
And connected to the power of a flexible cable or integral part of the pre-cable connection.
Note. In general, both the connector and socket contacts are arranged in the same.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 15872-2013_English be delivered?Answer: Upon your order, we will start to translate GB/T 15872-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 15872-2013_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 15872-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 15872-2013?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 15872-2013 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|