GB/T 13200-1991 PDF English
US$110.00 · In stock · Download in 9 secondsGB/T 13200-1991: Water quality. Determination of turbidity Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 13200-1991 | English | 110 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Water quality. Determination of turbidity
| |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 13200-1991
GB/T 13200-1991: Water quality. Determination of turbidity---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT13200-1991
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
GB 13200-91
Water quality - Determination of turbidity
APPROVED ON. AUGUST 31, 1991
Implemented on: JUNE 01, 1992
Issued by. National Environmental Protection Agency
Table of Contents
1 Subject contents and scope of application... 3
2 Principle... 3
3 Reagents... 3
4 Instruments... 4
5 Samples... 4
6 Analytical procedures... 4
7 Expression of results... 5
8 Principles... 5
9 Reagents... 6
10 Instruments... 6
11 Analytical procedures... 7
12 Expression of analysis results... 7
Additional information... 8
Water quality - Determination of turbidity
This standard refers to and adopts the international standard ISO 7027-1984
"Water quality - Determination of turbidity".
1 Subject contents and scope of application
1.1 This standard specifies two methods for determining turbidity in water. The
first part is the spectrophotometric method, which is applicable to drinking water,
natural water, high-turbidity water; the minimum detection turbidity is 3 degrees.
The second part is visual turbidimetry, which is applicable to low-turbidity water,
such as drinking water and source water; the minimum detection turbidity is 1
degree.
1.2 There shall be no debris and easily sinking particles in the water. If the
utensils used are not clean, OR there are dissolved bubbles and colored
substances in the water, it will interfere with the measurement.
Part 1 -- Spectrophotometry
2 Principle
At an appropriate temperature, hydrazine sulfate and hexamethylenetetramine
polymerize, to form a white polymer. It is used as a turbidity standard solution,
to compare with the turbidity of the water sample, under certain conditions.
3 Reagents
Unless otherwise specified, it shall use the analytically pure reagents, deionized
water or water of equivalent purity, which comply with national standard or
professional standard, in the analysis.
3.1 Turbidity-free water
The distilled water is filtered through a 0.2 µm filter membrane; collected in a
flask that was shaken-rinsed twice by filtered water.
3.2 Turbidity standard stock solution
3.2.1 The 1 g/100 mL hydrazine sulfate solution
Weigh 1.000 g of hydrazine sulfate [(N2H4)H2SO4]. Dissolve it in water. Make
its volume reach 100 mL.
Note. Hydrazine sulfate is toxic and carcinogenic!
3.2.2 The 10 g/100 mL hexamethylenetetramine solution
Weigh 10.00 g of hexamethylenetetramine [(CH2)6N4]. Dissolve it in water.
Make its volume reach to 100 mL.
3.2.3 Turbidity standard stock solution
Pipette 5.00 mL of hydrazine sulfate solution (3.2.1) AND 5.00 mL of
hexamethylene tetramine solution (3.2.2), put into a 100 mL volumetric flask.
Mix it uniformly. Let stand at 25 ± 3 °C for reaction for 24 h. After cooling, use
water to dilute it to the marking line. Mix it uniformly. The turbidity of this solution
is 400 degrees. It can be stored for one month.
4 Instruments
General laboratory equipment and the following.
4.1 The 50 mL colorimetric tube with stopper.
4.2 Spectrophotometer.
5 Samples
The samples shall be collected in glass bottles with stoppers. It shall be tested
as soon as possible after sampling. If it needs to be stored, it can be stored in
a cool and dark place, for no more than 24 hours. Before testing, shake
vigorously and make it return to room temperature.
All glassware in contact with the sample must be clean; it can be washed by
hydrochloric acid or surfactants.
6 Analytical procedures
6.1 Drawing of standard curve
Pipette 0, 0.50, 1.25, 2.50, 5.00, 10.00, 12.50 mL of turbidity standard solution
(3.2.3). Put it in a 50 mL colorimetric tube. Add water to the mark. After shaking
uniformly, it obtains the standard series, which have the turbidity of 0.4, 10, 20,
40, 80, 100 degrees. At a wavelength of 680 nm, use a 30 mm cuvette to
measure the absorbance. Draw a calibration curve.
9 Reagents
Unless otherwise specified, during analysis, it shall use the analytically pure
reagents, deionized water or water of equivalent purity, which comply with
national standard or professional standard, in the analysis.
9.1 Turbidity standard solution
9.1.1 Turbidity standard stock solution. Weigh 10 g of diatomaceous earth,
which has passed through a 0.1 mm sieve, in a mortar. Add a little water to
make a paste. Grind it. Transfer it to a 1000 mL graduated cylinder. Add water
to the mark. After fully stirring, let it stand for 24 hours. Use the siphon method,
to carefully transfer the upper layer 800 mL suspension, into a second 1000 mL
graduated cylinder. Add water to 1000 mL. Stir well. Let it stand for 24 hours.
Absorb the upper layer of 800 mL of the suspension, which contains finer
particles. Discard it. Add water to the lower part of solution, to dilute it to 1000
mL. After fully stirring it, store it in a stoppered glass bottle, in which the diameter
of diatomaceous earth particles is about 400 µm.
Take 50.0 mL of the above suspension. Place it in a constant-weight
evaporating dish. Evaporate it to dryness on a water bath. Bake it in an oven at
105 °C for 2 hours. Place it in a dryer to cool for 30 min. Weigh it. Repeat the
above operations, that is, bake for 1 hour, cool, weigh, until constant weight.
Calculate the weight (mg) of diatomaceous earth, which is contained in 1 mL of
the suspension.
9.1.2 Standard solution with turbidity of 250 degrees. Pipette a suspension,
which contains 250 mg of diatomaceous earth. Place it in a 1000 mL volumetric
flask. Add water to the mark. Shake it uniformly. The solution has a turbidity of
250 degrees.
9.1.3 Standard solution with turbidity of 100 degrees. Pipette 100 mL of
standard solution (9.1.2), which has a turbidity of 250 degrees, in a 250 mL
volumetric flask. Use water to dilute it to the mark. Shake it uniformly. The
turbidity of this solution is 100 degrees.
Add mercury chloride to each standard solution, to prevent the growth of fungi.
Note. Mercury chloride is highly toxic!
10 Instruments
General laboratory equipment and the following.
10.1 The 100 mL colorimetric tube with stopper.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 13200-1991 be delivered?Answer: The full copy PDF of English version of GB/T 13200-1991 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 13200-1991_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 13200-1991_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 13200-1991 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of GB/T 13200-1991?A step-by-step guide to download PDF of GB/T 13200-1991_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 13200-1991".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|