GB 30485-2013 (GB30485-2013) & related versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | See Detail | Status | Similar PDF |
| GB 30485-2013 | English | 90 |
Add to Cart
|
0-9 seconds. Auto delivery.
|
Standard for pollution control on co-processing of solid wastes in cement kiln
|
GB 30485-2013
| Valid |
GB 30485-2013
|
Buy with any currencies (Euro, JPY, KRW...): GB 30485-2013 Preview this PDF: GB 30485-2013
GB 30485-2013: PDF in English
GB 30485-2013
GB
NATIONAL STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
Standard for pollution control on co-processing of solid
wastes in cement kiln
ISSUED ON. DECEMBER 27, 2013
IMPLEMENTED ON. MARCH 1, 2014
Issued by. Ministry of Environmental Protection State Administration for Quality
Supervision and Inspection and Quarantine
Ministry of Environmental Protection of the People’s Republic of China
2013 No. 80
In order to carry out Environmental Protection Law of the People's Republic of China, Law of the
People's Republic of China on Prevention and Control of Atmospheric Pollution and Law of the
People's Republic of China on Prevention and Control of Water Pollution, prevent and control
pollution, protect environment, and protect human health, we hereby approve the 4
standards including Emission Standard of Atmospheric Pollutants for Cement Industry as the
national standards for emission (control) of pollutants. They are jointly issued by the
Ministry of Environmental Protection and State Administration for Quality Supervision and
Inspection and Quarantine. Standard names and standard numbers are as follows.
1. Emission standard of atmospheric pollutants for cement industry (GB
4915-2013);
2. Standard for pollution control on co-processing of solid wastes in cement kiln
(GB 30485-2013);
3. Emission standard of pollutants for battery industry (GB 30484-2013);
4. Emission standard of water pollutants for leather and fur making industry (GB
30486-2013).
In accordance with the provisions of relevant laws, above standards are compulsory.
The above standards are effective since March 1, 2014.
The above standards have been published by the China Environmental Press and the
standards’ contents can be searched from the website of the Ministry of Environmental
Protection (bz.mep.gov.cn). Newly established enterprises shall stop to execute GB
4915-2004 Emission Standard of Air Pollutants for Cement Industry from March 1, 2014. And
existing enterprises shall stop to execute GB 4915-2004 from July 1, 2015.
Hereby it is noticed.
Ministry of Environmental Protection
December 27, 2013
Table of Contents
Foreword ... 4
1 Scope of application ... 6
2 Normative references ... 7
3 Terms and definitions ... 8
4 Co-processing facilities ... 10
5 Characteristics of kiln co-processed solid waste ... 12
6 Operation technical requirements ... 12
7 Pollutants emission limits ... 13
8 Pollution control of cement products ... 14
9 Monitoring requirements ... 15
10 Implementation and monitoring ... 16
Foreword
This Standard is hereby prepared to carry out Environmental Protection Law of the People's
Republic of China, Law of the People's Republic of China on Prevention of Environmental Pollution
Caused by Solid Waste, Law of the People's Republic of China on Prevention and Control of
Atmospheric Pollution, Circular Economy Promotion Law of the People's Republic of China, Law of
the People's Republic of China on Product Quality, and other laws and regulations to protect
the environment, prevent and control the pollution caused during the process of
co-processing solid wastes in the cement kiln, and to improve the production process and
pollution control technology.
This Standard specifies the technical requirements for cement kiln facilities for
co-processing solid wastes, property requirements of wastes entering the kiln, technical
requirements for operation, emission limits of pollutants, control requirements, monitoring,
supervision and management requirements for pollutants caused by cement products
manufactured.
This Standard is first-time issued.
Emission of water pollutants, environment noises caused during the process of
co-processing solid wastes in cement kiln is subject to relevant national emission
standards for pollutants. And the identification, treatment and disposal of solids wastes
caused are subject to relevant national control standards for solid waste pollution.
Emission limits of the pollutants specified in this Standard are the basic requirements.
Local provincial governments may develop local emission standard of pollutants for
pollutant items that are not covered in this Standard. It may develop local emission
standard of pollutants stricter than this Standard for pollutant items that are already
covered in this Standard. If the limit values approved by the environmental influence
assessment are stricter than that of this Standard or local standard, the limit values
approved by the environmental influence assessment shall prevail.
This Standard was organized and formulated by Department of Science, Technology and
Standards, Ministry of Environmental Protection of the People’s Republic of China.
Drafting organizations of this Standard. Chinese Research Academy of Environmental
Sciences, China Building Materials Academy, Beijing Jinyu Mangrove Environmental
Protection Technology Co., Ltd., and Foreign Economic Cooperation Office, Ministry of
Environmental Protection.
The Standard was approved by Ministry of Environmental Protection on December 16,
2013.
This Standard will be implemented on March 1, 2014.
The Ministry of Environmental Protection is responsible for the interpretation of this
Standard.
Standard for pollution control on co-processing of
solid wastes in cement kiln
1 Scope of application
This Standard specifies the technical requirements for cement kiln facilities for
co-processing solid wastes, property requirements of wastes entering the kiln, technical
requirements for operation, emission limit of pollutants, control requirements, monitoring,
supervision and management requirements for pollutants caused by cement products
manufactured.
This Standard is applicable to the pollution control, supervision and management during
the process of co-processing hazardous wastes, household wastes (including waste
plastics, waste rubbers, waste paper, waste tire, etc.), sludge caused by urban and
industrial wastewater treatment, processing waste of animals and plants, polluted soil,
emergency wastes and other solid wastes using cement kiln. When using cement kiln to
co-process household wastes, if the mass of household wastes added exceeds 30% of
the total mass of kiln (furnace) materials, the Standard for Pollution Control on the
Municipal Solid Waste Incineration shall be executed.
This Standard applies to the behavior of pollutants emission allowed by law. Site selection
of newly established pollution source and management of existing pollution source within
the special protection zone shall be executed in accordance with relevant provisions of
Law of the Peoples Republic of China on the Prevention and Control of Atmospheric
Pollution, Law of the Peoples Republic of China on the Prevention and Control of Water
Pollution, Marine Environment Protection Law of the Peoples Republic of China, Law of
the People's Republic of China on Prevention of Environmental Pollution Caused by Solid
Waste, Law of the Peoples Republic of China on Prevention and Control of Radioactive
Pollution, Law of the People's Republic of China on Appraising of Environment Impacts
and other laws, regulations and rules.
2 Normative references
The articles contained in the following documents have become part of this Standard
when they are quoted herein. For the undated documents so quoted, the latest editions
shall be applicable to this Standard.
GB 4915 Emission standard of air pollutants for cement industry
GB 14554 Emission standard for odor pollutants
GB 18597 Standard for pollution control on hazardous waste storage
GB/T 16157 The determination of particulates and sampling methods of gaseous
pollutants emitted from exhaust gas of stationary source
HJ 77.2 Ambient air and waste gas Determination of polychlorinated
dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs)
HJ 543 Stationary source emission. Determination of mercury. Cold atomic
absorption spectrophotometry (Provisional)
HJ 657 Ambient air and stationary source emission - Determination of metals in
ambient particulate matter – Inductively coupled plasma/mass spectrometry
(ICP-MS)
HJ 662 Environmental protection technical specification for co-processing of Solid
wastes in cement kiln
HJ 668 Water quality-Determination of total nitrogen by flow injection analysis (FIA)
and N-(1-naphthyl) ethylene diamine dihydrochloride spectrophotometry
HJ/T 27 Stationary source emission -- Determination of hydrogen chloride -- Mercuric
thiocyanate spectrophotometric method
HJ/T 38 Stationary source emission -- Determination of nonmethane hydrocarbons --
Gas chromatography
HJ/T 55 Technical guidelines for fugitive emission monitoring of air pollutants
HJ/T 75 Specifications for continuous emissions monitoring of flue gas emitted from
stationary sources (on trial)
HJ/T 176 Technical specifications for centralized Incineration facility construction on
hazardous waste
environment protection in a centralized manner.
3.5
New dry process cement kiln
It refer...
......
| Standard ID | GB 30485-2013 (GB30485-2013) | | Description (Translated English) | Standard for pollution control on co-processing of solid wastes in cement kiln | | Sector / Industry | National Standard | | Classification of Chinese Standard | P74 | | Classification of International Standard | 81.020 | | Word Count Estimation | 11,124 | | Quoted Standard | GB 4915; GB 14554; GB 18597; GB/T 16157; HJ 77.2; HJ 543; HJ 657; HJ 662; HJ 688; HJ/T 27; HJ/T 38; HJ/T 55; HJ/T 75; HJ/T 176; HJ/T 397; "auto pollution monitoring and management approach" State Environmental Protection Administration Order No. 28 | | Drafting Organization | Chinese Research Academy of Environmental Sciences | | Administrative Organization | Department of Environmental Protection | | Regulation (derived from) | Department of Environmental Protection Notice No. 80 of 2013; National Standards Bulletin 2013 No. 27 | | Summary | This standard specifies the synergy of solid waste disposal facilities technical requirements for cement kilns, kiln waste characterization requirements, operations requirements, emission limits, the production of cement products pollutant control require |
|