HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB 1886.5-2015 English PDF

US$149.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 1886.5-2015: National Food Safety Standard -- Food Additives -- Sodium nitrate
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB 1886.5-2015English149 Add to Cart 3 days [Need to translate] National Food Safety Standard -- Food Additives -- Sodium nitrate Valid GB 1886.5-2015

PDF similar to GB 1886.5-2015


Standard similar to GB 1886.5-2015

GB 1886.223   GB 1886.20   GB 1886.228   GB 1886.3   GB 1886.1   GB 1886.4   

Basic data

Standard ID GB 1886.5-2015 (GB1886.5-2015)
Description (Translated English) National Food Safety Standard -- Food Additives -- Sodium nitrate
Sector / Industry National Standard
Classification of Chinese Standard X42
Classification of International Standard 67.220.20
Word Count Estimation 7,758
Date of Issue 2015-09-22
Date of Implementation 2016-03-22
Older Standard (superseded by this standard) GB 1891-2007
Regulation (derived from) PRC National Health and Family Planning Commission 2015 No.8
Issuing agency(ies) National Health and Family Planning Commission of the People's Republic of China

GB 1886.5-2015: National Food Safety Standard -- Food Additives -- Sodium nitrate

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(National food safety standards for food additives nitrite) National Standards of People's Republic of China National Food Safety Standard Food additive sodium nitrate Issued on. 2015-09-22 2016-03-22 implementation People's Republic of China National Health and Family Planning Commission released

Foreword

This standard replaces GB 1891-2007 "food additive sodium nitrate." This standard compared with GB 1891-2007, the main changes are as follows. --- Standard name was changed to "national food safety standards for food additives sodium nitrate." National Food Safety Standard Food additive sodium nitrate

1 Scope

This standard applies to food additives nitrite.

2 molecular formula and relative molecular mass

Formula 2.1 NaNO3 2.2 relative molecular mass 84.99 (according to 2007 international relative atomic mass)

3 Technical requirements

3.1 Sensory requirements Sensory requirements shall comply with the requirements of Table 1. Table 1 Sensory requirements Project requires test methods Color white, or slightly pale gray, yellow Fine crystal state Take the right amount of sample is placed in a clean, dry white porcelain dish, self Observe the color and state of natural light 3.2 Physical and Chemical Indicators Physical and chemical indicators should be consistent with the provisions of Table 2. Table 2. Physical and chemical indicators Item Index Test Method Sodium nitrate (NaNO3) content (dry basis), w /% 99.3 ~ 100.5 Appendix A A.4 Chloride (Cl dollars), w /% ≥ 0.20 Appendix A A.5 Water, w /% ≤ 1.5 A.6 in Appendix A Heavy metals (Pb)/(mg/kg) ≤ 5.0 GB 5009.74 Arsenic (As)/(mg/kg) ≤ 2.0 GB 5009.76

Appendix A

Testing method A.1 Safety Tips Reagents used in this test method are toxic or corrosive, care should be taken. Such as water splashed on the skin should immediately Flushing, severe cases should be treated immediately. A.2 General Provisions This standard reagents and water in the absence of other specified requirements, refer to the three water analytical reagent and GB/T 6682 regulations. Reagents Used in the standard solution, standard solution for measuring impurities, formulations and products, did not indicate when the other requirements according to GB/T 601, GB/T 602, GB/T 603 provisions of the preparation. Solution was used in the tests did not indicate what is formulated with solvent, it refers to an aqueous solution. A.3 Identification Test A.3.1 take the test solution, mix equal amount of sulfuric acid was added carefully ferrous sulfate solution (80g/L) After cooling, the liquid into two layers at the interface was Shows brown. A.3.2 take the test solution, adding sulfuric acid and copper, which produce a reddish-brown gas heating. A.3.3 take platinum wire, moistened with hydrochloric acid, till the first colorless colorless flame, then dipped a little test solution, colorless flame burning on fire That flame was yellow. A.4 Determination of sodium nitrate (NaNO3) content (dry basis) of A.4.1 Method summary With hydrochloric acid and sodium nitrite is converted to sodium chloride to remove excess nitric acid and hydrochloric acid, evaporated to dryness, measuring the amount of silver chloride method heating. A.4.2 Reagents and materials A.4.2.1 hydrochloric acid solution. 41. A.4.2.2 standard silver nitrate titration solution. c (AgNO3) = 0.1mol/L. A.4.2.3 Potassium chromate solution. 100g/L. A.4.2.4 litmus solution. 10g/L. A.4.3 Analysis step It weighs about 0.8g previously lost water when dried to a constant weight of the sample (sample can also be called directly, the results at 105 ℃ ~ 110 ℃ Minutes), accurate to 0.0002g, placed in a small beaker. Add 20mL hydrochloric acid solution, cover the surface of the dish, steam bath (or adjustable electric) on And evaporated to dryness. Plus 20mL hydrochloric acid solution to dissolve the residue and evaporated again to dryness. The litmus heating was continued until the residue is dissolved in water when It was neutral. The solution was transferred to 100mL volumetric flask, dilute to the mark. Pipette 25mL solution was placed in 150mL beaker, Add 4 drops of potassium chromate indicator solution, under uniform stirring, titration with standard silver nitrate titration solution, to show steady light orange suspension is End, while the blank test. Blank test shall be measured in parallel, using the same analysis steps, taking the same amount of all reagents, the blank test without the sample. A.4.4 Calculation Results Sodium nitrate (NaNO3) content (dry basis) of the mass fraction w1, according to equation (A.1) Calculated. w1 = c × (V-V0) × M m × ÷ × 1000 × 100% (A.1) Where. Concentration c --- standard silver nitrate titration solution, expressed in moles per liter (mol/L); V --- volume of the sample solution was titrated standard silver nitrate titration solution consumption in milliliters (mL); V0 --- blank titration volume of silver nitrate standard solution titration solution consumption in milliliters (mL); --- The M sodium nitrate molar mass in grams per mole (g/mol), [M (NaNO3) = 84.99]; M --- the quality of the sample, in grams (g); --- Conversion factor; 1000 --- conversion factor. Take the arithmetic mean of the parallel determination results of the measurement results, the results of two parallel determination of the absolute difference is not more than 0.2%. A.5 chloride (Cl) Determination A.5.1 Method summary With GB/T 3051-2000 Chapter 3. A.5.2 Reagents and materials A.5.2.1 urea. A.5.2.2 other with GB/T 3051-2000 Chapter 4. A.5.3 Instruments and Equipment Microburette. dividing the value of 0.01mL or 0.02mL. A.5.4 Analysis step A.5.4.1 Preparation of the reference solution In 250mL Erlenmeyer flask add 50mL water, add 3g of urea dissolved by heating. A solution of (11) in the nitric acid solution to a boil without bubbles Generating, cooling. Add 2 drops to 3 drops of bromophenol blue indicator solution, with sodium hydroxide solution (1mol/L) adjusted solution was blue, with a (113) nitrate Adjust the solution to the solution from blue to yellow and then excess 2 drops to 6 drops. Add 1mL diphenylcarbazone hydrazide indicator solution, microtiter Tube with c [ 2Hg (NO) 2] is about 0.05mol/L nitrate mercury standard titration solution titrated to purple. Record mercuric nitrate titration standard solution The volume of fluid. This solution was formulated before use. A.5.4.2 Determination Weigh about 10g sample, accurate to 0.01g, placed in 250mL conical flask, add about 50mL of water, heating the sample is completely dissolved. plus 3g of urea dissolved by heating, a solution of (11) in the micro-boiling nitric acid solution, to no small bubbles, cooling, add 2 drops of bromophenol blue indicator solution, with Sodium hydroxide solution (1mol/L) was adjusted solution was blue, with a (113) was adjusted nitrate solution turns from blue to yellow and then excess 2 drops ~ 6 drops. Join 1mL diphenylcarbazone hydrazine indicator solution, using microburette concentration c [ 2Hg (NO) 2] is about 0.05mol/L of Mercuric nitrate titration standard solution titration solution from yellow to the reference solution with the same purple as the end point. The mercury-containing waste is collected in a bottle after titration, according to the method GB/T 3051-2000 Annex D for processing. A.5.5 Calculation Results Chloride (Cl) mass fraction w2, according to equation (A.2) Calculated. w2 = c × (V-V0) × M m × 1000 × 100% (A.2) Where. Concentration c --- silver nitrate mercury standard titration solution, expressed in moles per liter (mol/L); Volume V --- titrate the sample solution consumed nitrate mercury standard titration solution, in milliliters (mL); Senate volume V0 --- mercury nitrate titration solution than the standard solution consumed in milliliters (mL); --- The M molar mass of chlorine in grams per mole (g/mol), [M (Cl) = 35.45]; M --- the quality of the sample, in grams (g); 1000 --- conversion factor. Take the arithmetic mean of the parallel determination results of the measurement results, the results of two parallel determination of the absolute difference is not more than 0.02%. A.6 Determination of Moisture A.6.1 Instruments and Equipment Weighing bottle. φ50mm × 30mm. A.6.2 Analysis step With pre-dried at 105 ℃ ~ 110 ℃ to constant quality weighing bottle Weigh about 5g samples, accurate to 0.0002g, at 105 ℃ ~ 110 ℃ drying to constant mass. A.6.3 Calculation Results Moisture mass fraction w3, according to equation (A.3) Calculated. w3 = m-m1 m × 100% (A.3) Where. M --- the quality of the sample, in grams (g); Quality, unit m1 --- after drying the sample in grams (g). Take the arithmetic mean of the parallel determination results of the measurement results, the results of two parallel determination of the absolute difference is not more than 0.02%. 5102- 5􀏕 6881

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB 1886.5-2015_English be delivered?

Answer: Upon your order, we will start to translate GB 1886.5-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB 1886.5-2015_English with my colleagues?

Answer: Yes. The purchased PDF of GB 1886.5-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.