|
US$669.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 17733-2008: Geographical names -- Signs
Status: Valid GB 17733: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB 17733-2008 | English | 669 |
Add to Cart
|
5 days [Need to translate]
|
Geographical names -- Signs
| Valid |
GB 17733-2008
|
| GB 17733.1-1999 | English | 319 |
Add to Cart
|
3 days [Need to translate]
|
Place name plates Towns and villages
| Obsolete |
GB 17733.1-1999
|
PDF similar to GB 17733-2008
Basic data | Standard ID | GB 17733-2008 (GB17733-2008) | | Description (Translated English) | Geographical names -- Signs | | Sector / Industry | National Standard | | Classification of Chinese Standard | P50 | | Classification of International Standard | 01.040.03 | | Word Count Estimation | 29,215 | | Date of Issue | 2008-04-23 | | Date of Implementation | 2008-08-01 | | Older Standard (superseded by this standard) | GB 17733.1-1999 | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 6 of 2008 (total 119) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This Chinese standard specifies the signposts definitions of terms, classification, requirements, test methods, inspection rules, and packaging. This standard applies to the signposts of the production, distribution, use, and supervision and inspection. | GB 17733-2008: Geographical names -- Signs---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Geographical names.Signs
ICS 01.040.03
P50
National Standards of People's Republic of China
Replacing GB 17733.1-1999
Signposts
Posted 2008-04-23
2008-08-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
1 Scope 1
2 Normative references 1
3 Terms and definitions
4 Category 2
5 Requirement 2
5.1 Setting 2
5.2 Content Layout 2
5.3 layout 3
5.4 Color 4
5.5 4 Dimensions
5.6 Exterior 5
5.7 Basic performance 5
5.7.1 substrate 5
5.7.2 Resistance to salt spray corrosion 5
5.7.3 heat-resistant properties 5
5.7.4 high temperature performance 5
5.7.5 low temperature performance 5
5.7.6 weather resistance 5
5.7.7 radiation performance 6
5.7.8 impact resistance 6
5.8 Special Features 6
5.8.1 Reflective signposts 6
5.8.2 long afterglow signposts 6
5.8.3 LED (light emitting diode) signposts 6
5.8.4 Corrosion signposts 6
5.8.5 stele style signposts 6
5.9 signposts support means 7
Names guide flag 7 5.10
5.11 External lighting equipment 7
6 Test methods 7
6.1 Sample Preparation 7
Visual inspection 6.2 Test Method 7
6.3 Resistance to salt spray corrosion test methods 7
Heat-resistant performance test method 6.4 8
6.5 High temperature performance test method 8
6.6 low temperature performance test method 9
6.7 Weathering performance test method 9
6.8 radiated performance test method 9
6.9 Test method for impact resistance 10
6.10 signposts long afterglow luminance 10 Test Method
Brightness and electrical safety performance test method 6.11 LED signposts 10
6.12 Test Report 11
7 Inspection rules 11
8 Packaging 12
(Normative) Appendix A word phonetic alphabet and Arabic numerals 14 words
Annex B (informative) Example 15 signposts forum
Requires long afterglow luminescent powder in Appendix C (normative) signposts 21
Requirements 22 Annex D (normative) signposts long afterglow film
Foreword
The standard six 5.2.1.1,5.2.1.2,5.2.1.3,5.2.1.4,5.7.7,5.8.3.3 content of the mandatory provisions. The remaining articles
Is recommended.
This standard replaces GB 17733.1-1999 "place name sign urban and rural areas."
This compared with the standard GB 17733.1-1999 "place name sign urban and rural areas", the main changes are as follows.
--- The standard name changed to "signposts";
--- Terms and definitions in the chapter, delete the place name signs, street signs, Lane boards, building licensing, building numbers five terms, increasing names, toponyms
Chi two terms (Excerpts Chapter 3; Chapter 3 edition 1999);
--- Terms and definitions in the chapter, delete the code section (Chapter 3 edition 1999);
--- Classification chapter, remove the model part (Chapter 4 of the 1999 edition);
--- Classification chapter, GB 17733.1-1999 include only residential signposts in the street, alley, building, door signposts, this standard
Type signposts increased to human geography and physical geography entities signposts entities signposts, where real human geography
Body signposts include. residential signposts, signposts administrative regions, specialized area signposts, signposts facilities, as well as
Memorial and tourist signposts, signposts natural geographical entity comprising. Sea signposts, signposts River, land topography
Mark (Chapter 4 of this edition; Chapter 4 edition 1999);
--- Demanding chapter, changed the colors, sizes and appearance requirements of the signposts (Excerpts 5.4,5.5,5.6; 1999 edition
The 5.2,5.4,5.5);
--- Requiring a chapter, delete pages, writing requirements (5.1,5.3 edition 1999); increased signposts settings within the layout
Content, layout requirements (Excerpts 5.1,5.2,5.3);
--- Demanding chapter, modify the basic performance requirements of the signposts of (this version 5.7; version of 1999 5.6.1,5.6.2,5.6.3,
5.6.4,5.6.5), modify the special performance requirements for reflective signposts and signposts of long afterglow (Excerpts 5.8.1,
5.8.2; 5.6.6,5.6.7 1999 version), delete the electroluminescent signposts of special performance requirements (1999 version 5.6.8), increase
Plus the special performance requirements for LED name signs, signposts and metal corrosion stele signposts of formula (Excerpts 5.8.3,
5.8.4,5.8.5);
--- Demanding chapter, adds support means, place names direction signs, external lighting equipment requirements of the signposts (edition 5.9,
5.10,5.11);
--- In a chapter test method, modify the appearance of the inspection and test method (edition 6.2; 1999 version 6.1), salt spray corrosion resistance
Test Method (edition 6.3; 1999 version 6.3.4), heat-resistant performance test method (edition 6.4; 1999 edition
6.3.5), weather resistance test method (6.7 Excerpts; 1999 version 6.3.2), radiated performance test method (edition 6.8;
Version 6.2 of 1999), impact resistance test method (edition 6.9; 1999 version 6.4), long afterglow luminance signposts
Test Method (Excerpts of 6.10; 1999 version 6.2), an increase of (6.1 Excerpts), high temperature performance test methods for sample preparation
(Edition 6.5), low temperature performance test method (6.6 Excerpts), brightness, and electrical safety test LED signposts of
The method (Excerpts of 6.11), the test report (edition 6.12);
--- Increased normative appendix "word phonetic alphabet and Arabic numerals word" (see Appendix A);
--- Added Appendix "signposts forum exemplary" informative (see Appendix B);
--- Increased normative appendix "signposts long afterglow luminescent powder of claim" (see Appendix C);
--- Increased normative appendix "signposts long afterglow film requirements" (see Appendix D).
The Standard Appendix A, Appendix C, Appendix D is a normative appendix, Appendix B is an informative annex.
The standard proposed by the People's Republic of China Ministry of Civil Affairs.
This standard by the National Standardization Technical Committee on Geographical Names.
This standard by the Ministry of Civil Affairs Quhuadiming Secretary, Ministry of Civil Affairs is responsible for drafting the Institute of Geographical Names.
Drafting of this standard. Changzhou Hua Sheng Reflective Material Co., Ltd., Hebei Green Photoelectric Technology Co., Ltd., Dalian Luming Luminescent
Technology Co., Ltd., Sichuan Xinli Industrial Group Co., Ltd.
Participated in the drafting of this standard. Wenzhou City Baoxing Printing Co., Tsinghua University, State Key Laboratory of New Ceramics and Fine craft,
Hebei University College of Physical Science and Technology, Hengshui vertical lathe Enterprise Group Co., Ltd., Dalian new spray technology development company, Avery (China)
Limited.
The main drafters of this standard. Dai Liang, Liu preservation, Sunxiu Dong, Chen , Songjiu Cheng, Pang right, Wangtai Ming, Wang V, Lu Jian Asia.
This standard was first published in 1999, this is the first revision.
Signposts
1 Scope
This standard specifies the definitions of terms signposts, classification, requirements, test methods, inspection rules, and packaging.
This standard applies to the signposts of production, distribution, use and supervision and inspection.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 191 Packaging - Pictorial signs (GB/T 191-2000, eqv ISO 780.1997)
GB/T 1720 film adhesion assay
GB/T 1732 Determination of impact resistance of film
GB/T 1733 Determination of water resistance of the film
GB/T 2423.10 Environmental testing for electric and electronic products Part 2. Test methods - Test Fc and guidance. Vibration (sinusoidal)
(GB/T 2423.10-1995, idt IEC 60068-2-6. 1982)
GB 2893 Safety colors (GB 2893-2001, neq ISO 3864. 1984)
Methods of measurement GB/T 3979 object colors
GB/T 6543 Corrugated Box
GB 7000.1 General safety requirements and test fixtures (GB 7000.1-2002, idt IEC 60598-1.1999)
GB/T 7284 wooden frame
GB/T 9174 General cargo transport packaging technology
GB/T 10001 (all parts) flag Public information graphical symbols
GB/T 11185 film bending test (cone axis) (GB/T 11185-1989, eqv ISO 6860. 1984)
GB/T 12464 ordinary wooden box (GB/T 12464-2002, neqJISZ1402.1999)
GB/T Soil quality Determination of cold atoms 17136 total mercury absorption spectrophotometry
GB/T 17137 Flame atomic mass of total chromium in soil absorption spectrophotometry
GB/T 17141 Soil quality lead and cadmium by graphite furnace atomic absorption spectrophotometry
GB/T 17693.1-1999 Western geographical names into Chinese - English Guide
GB/T 18833-2002 road traffic signs reflective film
Minority language place names phonetic alphabet transliteration written 1976-06 National Mapping Bureau, Chinese characters Reform Commission
Chinese place names Pinyin spelling rules (Chinese Names section) 1984-12-25 China Committee on Geographical Names, characters and Reform Commission, China
, The State Bureau of Surveying and Mapping
3 Terms and Definitions
The following terms and definitions apply to this standard.
3.1
People of various geographical entities given distinguished name.
[GB/T 17693.1-1999, Definition 2.1]
3.2
Flag amenities geographic entity distinguished name and related information.
Category 4
4.1 natural geographical entity signposts
4.1.1 Sea signposts, signposts including oceans, bays, straits, beaches, islands, islands, headlands, peninsulas like.
4.1.2 River signposts, including rivers, Heyuan, estuaries, lakes, land islands (including River Island, Island Lake, etc.), glaciers (including cirque glacier
Valley, etc.), waterfalls, springs and other names flag.
4.1.3 signposts terrain, including plains, basins, plateaus, hills, mountains, Yamaguchi, valleys, mountains, volcanoes, grasslands, forests, deserts, Ge
Wall, oasis like signposts.
4.2 Places entity signposts
4.2.1 residential place name signs, including street, alley, area sheet, district, door, floor, floor unit, floor and village names and other signs.
4.2.2 Administrative region signposts, including the provincial level (provinces, autonomous regions, municipalities and special administrative regions) signposts, ground level (prefecture-level cities, autonomous
State, prefecture and the AU, etc.) signposts, county (counties, cities, municipal districts, autonomous and flag, etc.) signposts, township (township, China
Family and hematoxylin township, etc.) signposts.
4.2.3 Professional area signposts, including mining, agricultural areas, forests, pasturelands, industrial areas, border areas, development zones, nature reserves, etc.
Signposts.
4.2.4 signposts facilities, including the railway station, bus station, ground (Town) Rail stations, seaports, river ports, ferries, airports, bridges (such as road bridge
Beams, railway bridges, flyovers and overpasses in the town, etc.), tunnels (such as road tunnels, railway tunnels, underground passages within the town, etc.), ring
Signposts Island has a place name meaning transport facilities, ponds, seawall, reservoirs, flood storage areas, irrigation canals, dams, canals and other place names have meaning
Signposts meaning of water conservancy facilities, power plants, power transmission stations and other signposts Names have significant power facilities.
4.2.5 memorial and tourist signposts, including scenic areas, parks, people memorial (for example cemetery, people memorial, Memorial, etc.),
Memorial events (such as the ancient battlefield, etc.), religious memorial (such as temple, temple, church, etc.) and the like signposts.
5 Requirements
5.1 Settings
5.1.1 Safety Requirements
Signposts set should not exist.
a) cause any harm to the potential danger to persons;
b) any potential risk to the environment caused by pollution.
5.1.2 setting mode
Signposts generally used. Column (mounted on one or more than one column), cantilevered, attachment type (such as hang nails, paste, insert
Inlay, etc.), stele style, as well as other manner.
5.1.3 Set height
In general, the lower edge of Column height from the ground, and attached to the cantilever type signposts of not less than 2m. Less than 2m
When the signposts corners shall be arc.
5.1.4 Setting Density
5.1.4.1 should be adapted to local conditions to determine the density of the signposts set up to ensure its full pointing guiding function.
5.1.4.2 Under normal circumstances, street, alley intersection shall be provided street, alley signposts. When the two intersection interval is greater than 300m, adaptive
When increasing the number of street, alley of signposts.
5.2 Content layout
5.2.1 Text
Chinese characters should use standard Chinese characters written on signposts 5.2.1.1.
5.2.1.2 signposts minority autonomous areas shall be marked in a minority character of local government regulations, the font used in accordance with its
The relevant provisions of the state.
5.2.1.3 Methods Phonetic Spelling accordance with the provisions of "Chinese place names Pinyin spelling rules (Chinese Names section)," the.
5.2.1.4 Minority Language Names Phonetic Spelling according to "minority language place names written phonetic alphabet transliteration" spelling.
5.2.1.5 signposts should use bold text. Word word phonetic alphabet and Arabic numerals in Appendix A.
5.2.1.6 signposts correct text, strokes clear, neat, evenly spaced, moderate overall position.
5.2.2 graphical symbols
5.2.2.1 increase following the signposts graphic symbols.
a) a specialized area signposts;
b) facilities signposts;
c) memorial and tourist signposts.
5.2.2.2 drawing and graphic symbols shall comply with the relevant provisions of GB/T 10001 in.
5.2.3 indicate the direction of information
Street, Street Lane signposts marked increase, indicating the lane towards the direction information.
5.2.4 zip code
ZIP code area where the door signposts increase.
5.3 layout
5.3.1 Text
5.3.1.1 sea, water, topography, administrative area, professional areas, facilities, memorial and tourist signposts and street, alley, area sheet, cell,
Village residents signposts, the upper three-fifths of the area marked characters names of geographical entities, two fifths of the lower part of the area marked geographical entity
Pinyin name. Layout examples are shown in Figure B. 1 to B. 15.
5.3.1.2 Building signposts left three-fifths of the area marked where blocks of Chinese characters and pinyin name of the village, where the characters name is marked
Shown in the upper three-fifths of the region, in a region marked Pinyin two fifths of the lower portion. Area to the right of two fifths of the number of buildings marked,
Number with Arabic numerals, a height of not less than 350mm. Layout example shown in Figure B. 16.
5.3.1.3 Door signposts region marked an upper two fifths courtyard, independent portal where the characters name neighborhoods and villages, the lower three-fifths
Regional Flag of the door numbered in Arabic numerals written. Layout example shown in Figure B. 17.
Three-fifths of the central unit floor area 5.3.1.4 signposts indicate the width of floor unit name. The first unit with "a unit" means, in turn
analogy. Layout example shown in Figure B. 18.
5.3.1.5 Floor area middle three-fifths of the diameter of the signposts marked floor number. On the ground floor with the first "1", and so on; to
Dir layer with "B1" represents, and so on. Layout example shown in Figure B. 19.
5.3.1.6 When stele formula signposts vertical position, the upper four-fifths of the area marked characters of the name of a geographical entity, one fifth of the area of the lower portion
Domain names Pinyin marked geographic entity, the name of vertical writing characters, Pinyin horizontal writing. Layout example shown in Figure B. 20. Flag minority
When the text marked in minority languages under the name of Chinese characters, wherein the upper three-fifths of the area marked characters geographic entity name, middle
Fifth area markers minority languages, the lower fifth of the area marked Pinyin, minority languages horizontal writing.
When stele style signposts tap the upper three-fifths of the area marked characters names of geographical entities, two fifths of the lower part of the area marked
Pinyin geographical entity name, Chinese name and Pinyin horizontal writing. Layout example shown in Figure B. 21.
5.3.1.7 In addition to the formula stele erected signposts set outside, under normal circumstances, marked minority languages, minority languages were marked in Chinese characters
Above said, one third of the area of the upper portion of the original Chinese characters written in the name of the region marked minority languages, the lower two-thirds of the area marked Kanji name
He said other parts of the same proportion.
5.3.2 graphical symbols
When setting graphic symbols, regional signposts left two fifths marked graphic symbol, three-fifths of the right side of the area marked geographical entity
Chinese characters and Pinyin names, including Chinese characters name plate in the upper three-fifths of the region, Pinyin marked in the lower region of two fifths
area. Layout example shown in Figure B. 22.
5.3.3 indicate the direction of information
Information indicating the direction marked on both sides of Pinyin, and maintain a certain distance and Pinyin. Information indicating the direction of the height of Chinese characters
Same height phonetic language. Layout example shown in Figure B. 23.
5.3.4 zip code
When the door to the signposts marked ZIP, the fifth region marked an upper courtyard, independent portal where the characters name neighborhoods and villages.
Three-fifths of the central region of the door marked numbered in Arabic numerals written. Fifth regional area where the lower part of the door marked
Domain zip code in the "zip code" words marked by a space, encoding with Arabic numerals. Layout example shown in Figure B. 24.
Color 5.4
Color signposts requirements in Table 1. Table, white, yellow-green or blue may be green when using long afterglow materials.
Divided by the substrate and brown color as the background color, the place name signs should be used GB 2893 required safety color.
Background color stele style signposts of the substrate can be color, text color should be black or red.
Color on the signposts graphic symbol shall comply with the relevant provisions of GB/T 10001 in, and with the flag material, background color and logo
The color of the text on maintaining coordination.
Table 1 color requirements
Type Background Color text color
Residential
Signposts
Street, Lane signposts
Blue (east-west, including the east-west Byway),
Green (north to south, including the north-south Byway)
white
Sheet area, district, door, floor unit,
Floor, village signposts
blue White
Substrate color (metal corrosion signposts) black or red
House signposts
Write the name of the left blue area, the right to write
Floor area is white
Left written text is white on the right writing
F red
Substrate color (metal corrosion signposts) black or red
Administrative areas, facilities signposts blue
Professional areas, sea, water, terrain signposts green
Memorial and tourist signposts brown
white
5.5 Dimensions
5.5.1 signposts graphic writing surface the size specifications in Table 2.
Table 1 Size specifications in millimeters
Types of
Writing plane size graphic
Length and width
The width of the outer edge
Residential
Signposts
Street name signs 1200 ~ 1700 300 ~ 700 ≤25
Lane signposts 460 160 ≤20
Sheet area, district, village signposts 800 ~ 1700 300 ~ 700 ≤25
Door signposts
Large 570 370 ≤15
The 270 170 ≤15
Small 150 90 ≤12
House signposts 900 500 ≤25
Floor unit signposts 300 ~ 400 150 ~ 200 ≤15
Floor signposts diameter.200 ~ 400 ≤15
Table 2 (Continued) millimeters
Types of
Writing plane size graphic
Length and width
The width of the outer edge
Administrative regions signposts 2000 ~ 7000 900 ~ 2500 ≤25
Professional area signposts 1500 ~ 3000 600 ~ 1200 ≤25
Facilities, memorial and tourist signposts 1500 ~ 3000 800 ~ 1500 ≤25
Sea, water, terrain signposts 1500 ~ 5700 600 ~ 1800 ≤25
5.5.2 stele formula signposts set vertical, wide graphic writing surface is (300 ~ 1000) mm, height (600 ~ 2000) mm; stele formula
When the signposts tapped, graphic writing surface of width (1000 ~ 2000) mm, height (600 ~ 1200) mm.
5.6 Appearance 1)
1) Unless otherwise specified, the requirements set forth in this standard 5.6 and 5.7 apply only to Column, cantilevered, Attached signposts, does not apply to stele
Style signposts.
5.6.1 signposts should look smooth, neat.
5.6.2 Test Methods according to the provisions of 6.2, signposts should the following defects.
a) significant glitches, cracks;
b) the obvious scratches, damage and color unevenness;
c) larger than 20mm2 bubbles;
d) light, reflective performance was uneven.
5.7 Basic performance
5.7.1 board
5.7.1.1 substrate can be used the following materials.
a) a metal material;
b) an inorganic non-metallic materials;
c) polymer materials.
5.7.1.2 substrate should have a certain hardness, impact resistance, bending resistance and tensile properties.
5.7.1.3 substrate surface should be smooth, flat, no scratches, cracks, dirt.
5.7.1.4 When necessary, the metal material surface rust should be prepared to deal with.
5.7.2 spray corrosion resistance
After the test method in accordance with the provisions of 120h 6.3, the surface of the specimen shall discoloration, blistering and erosion phenomena.
5.7.3 heat-resistant properties
After following the test method specified in 6.4 48h, the surface of the specimen shall blistering, rust and fall off and so on.
5.7.4 high temperature performance
After following the test method specified in 6.5 of 24h, the surface of the specimen shall cracks, softening, peeling, wrinkles, blistering, no warping and appearance
Uniform and so on.
5.7.5 low temperature performance
The method according to the provisions of 6.6 after test 72h, the surface of the specimen shall cracks, softening, peeling, wrinkles, blistering, no warping and appearance
Uniform and so on.
5.7.6 weathering performance
After the test method in accordance with the provisions of 1200h 6.7, the surface of the specimen shall discoloration, cracks, mildew, rust, dents, blistering, erosion,
Peeling, chalking, deformation and shedding phenomenon.
5.7.7 radiation performance
The method according to the test, α, β, γ radiation should not exceed a predetermined value of 6.8 background reading twice.
5.7.8 impact resistance
Use the bottom surface of the film as signposts, impact resistance should be consistent in 5.8.2.3 b) require the column item; other signposts in accordance with
After the test method specified in 6.9, the sample should not be damaged.
5.8 Special Features
5.8.1 Reflective signposts
5.8.1.1 performance chroma chromaticity coordinates for each color in the test method, the sample surface GB/T 18833-2002 7.3 prescribed
And luminance factor should be GB/T 18833-2002 in the range of Table 1, all kinds of color chromaticity diagram, see GB/T 18833-2002 in
Figure 3.
5.8.1.2 retroreflective performance of retroreflective system according to GB/T 18833-2002 test method specified in 7.4, the sample surface are not to
Four reflective film is less than GB/T 18833-2002 specified requirements.
5.8.2 long afterglow signposts
5.8.2.1 Test method in accordance with the provisions of 6.10, the sample should be higher than the initial brightness 10000mcd/m2, brightness should stimulate end 10h
Less than 3mcd/m2.
Performance long afterglow powder used 5.8.2.2 requirements should be consistent with the corresponding provisions of Appendix C.
5.8.2.3 When using the film as a bottom surface, the film's performance should be consistent.
a) Water resistance. In addition to the sample in accordance with external 6.1 prepared in accordance with the test method after 5min GB/T 1733 regulations, should not be lost
Light, discoloration, blistering, wrinkling, loss, rust and other phenomena;
b) impact resistance. In addition to the sample in accordance with external 6.1 prepared according to the method after the test GB/T 1732 regulations, not crack,
Wrinkles and peeling and so on;
c) resistance to bending performance. In addition to the sample in accordance with external 6.1 prepared according to the method after the test GB/T 11185 regulations s...
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB 17733-2008_English be delivered?Answer: Upon your order, we will start to translate GB 17733-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB 17733-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB 17733-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB 17733-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB 17733-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|