|
US$174.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 17498.9-2008: Stationary training equipment -- Part 9: Elliptical trainers -- Additional specific safety requirements and test methods
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB 17498.9-2008 | English | 174 |
Add to Cart
|
3 days [Need to translate]
|
Stationary training equipment -- Part 9: Elliptical trainers -- Additional specific safety requirements and test methods
| Valid |
GB 17498.9-2008
|
PDF similar to GB 17498.9-2008
Basic data | Standard ID | GB 17498.9-2008 (GB17498.9-2008) | | Description (Translated English) | Stationary training equipment -- Part 9: Elliptical trainers -- Additional specific safety requirements and test methods | | Sector / Industry | National Standard | | Classification of Chinese Standard | Y55 | | Classification of International Standard | 97.220.30 | | Word Count Estimation | 9,935 | | Date of Issue | 2008-12-30 | | Date of Implementation | 2010-04-01 | | Quoted Standard | GB 17498.1-2008; ISO 5904; EN 71-1; EN 563 | | Adopted Standard | ISO 20957-9-2005, IDT | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 27 of 2008 (total 140) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This Chinese standard applies to elliptical training machine (also known as cross trainers) in addition to general safety requirements of GB 17498. 1 specific safety requirements should be used in conjunction with GB 17498. 1. This standard applies to elliptical training machine (also known as cross trainers). | GB 17498.9-2008: Stationary training equipment -- Part 9: Elliptical trainers -- Additional specific safety requirements and test methods
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Stationary training equipment.Part 9. Elliptical trainers.Additional specific safety requirements and test methods
ICS 97.220.30
Y55
National Standards of People's Republic of China
GB 17498.9-2008/ISO 20957-9.2005
Stationary training equipment
Part 9. elliptical trainer
Additional specific safety requirements and test methods
(ISO 20957-9.2005, IDT)
Posted 2008-12-30
2010-04-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
Section 5 of this chapter, Chapter 7 are mandatory; the rest are recommended.
GB 17498 "Stationary training equipment" consists of the following nine sections.
--- Part 1. General safety requirements and test methods;
Strength training equipment, additional specific safety requirements and test methods;. --- Part 2
Strength training benches, additional specific safety requirements and test methods;. Part 4 of ---
--- Part 5. Particular safety requirements and test methods Pedal crank training equipment, additional;
--- Part 6. specific safety requirements and test methods for treadmills added;
--- Part 7. specific safety requirements and test methods for rowing attached;
--- Part 8. Particular safety requirements and test methods for stepping machine, step machine and additional climber;
--- Part 9. elliptical trainers, additional specific safety requirements and test methods;
--- Part 10. with a fixed wheel or without flywheel exercise bike, additional specific safety requirements and test methods.
This is part of the GB Part 917 498.
The standard at the time of division of its parts, in order to maintain consistency with the original international standards, will be Part 2 and Part 3 to be a
merge.
This part identical with ISO 20957-9.2005 "Stationary training equipment - Part 9. Elliptical trainers, additional specific safety to machine
Sum Test methods. "
For ease of use, this section made the following editorial changes.
--- In order to maintain our existing fitness equipment harmonization of national standards and in accordance with the actual use of such products in the field at home and abroad
The product and our customary name, appropriately modified "guide elements" standard name; that is, directly translated
Thesaurus "stationary training equipment" (stationarytrainingequipment) in order to modify the "Stationary training equipment";
--- Remove the cover of the international standard, PDF denied responsibility statement (PDFdisclaimer), Preface and Table of Contents;
--- Use the decimal symbol instead of decimal symbol ",". ",";
--- With "GB 17498 of the present part" or "this part" instead of "this part of ISO 20957."
This part is proposed by the China National Light Industry Council.
This part of the National Center for Standardization centralized stationery.
This section drafted by. National Sporting Goods Quality Supervision and Inspection Center, Qingdao Impulse (Group) Co., Ltd., Shanxi O Reiter Health
Industry Co., Ltd., Shenzhen, a good family Industrial Co., Ltd., Ningbo Michelis Sports Equipment Co., Ltd., Shandong Xianghe Group shares have
Limited, evergreen (Shanghai) Co., Ltd. sports equipment.
The main drafters of this section. Yan-Ling Wang, Zhou Mao security, Hou Duxing, Xuean Hu, Zhang Jiaxing, Han Guang, Zhu, one, Cui Juntao, Liu Yan Xiong.
GB 17498.9-2008/ISO 20957-9.2005
Stationary training equipment
Part 9. elliptical trainer
Additional specific safety requirements and test methods
1 Scope
GB This section 17498 specifies the elliptical trainer (also called a cross trainer) GB 17498.1 In addition to the general safety requirements
Particular safety requirements and should be used in conjunction with GB 17498.1.
This section applies to the elliptical trainer (also called a cross trainer).
2 Normative references
The following documents contain provisions which, through reference in this Part of GB 17498, constitute provisions of this part. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this
section.
GB 17498.1-2008 Stationary training equipment - Part 1. General safety requirements and test methods (ISO 20957-1.2005,
IDT)
ISO 5904 Gymnastics Floor Exercise equipment floor mats and non-slip surface Determination
EN71-1 Safety of toys - Part 1. mechanical and physical properties
EN563 Safety of machinery - accessible surface temperature determine the thermal limit of the surface temperature data Ergonomics
3 Terms and Definitions
GB 17498.1-2008 established as well as the following terms and definitions apply to this part of GB 17498.
3.1
It can produce a continuous reciprocating elliptical foot movement, and can include a manually operated upper limb training equipment training apparatus. Elliptical trainer press even
Continued operation and reciprocating closed-loop cycle.
3.2
Pedal pedal
According to the manufacturer's supporting leg training program designed for proper operation of apparatus.
3.3
Pedal guards pedalguard
Fence fence
When the training program by the manufacturer for the correct operation of preventing the rigid member leg slip foot platform design.
3.4
A cycle elliptical trainer finger from the starting point through the entire range of motion (360 °) and then back to the starting point.
GB 17498.9-2008/ISO 20957-9.2005
Category 4
Shall comply with the requirements of Chapter 4 GB 17498.1-2008.
5 Safety requirements
5.1 General
Design training equipment components in addition to meeting outside GB 17498.1-2008 shall comply with the following requirements.
5.2 external structure
5.2.1 accessible parts of the crushing and shearing points
Elliptical trainer should be no crushing and shearing points.
6.2 Test Press.
5.2.2 Surface Temperature
6.3 When you press the test, the temperature on the accessible parts of the elliptical training equipment should not exceed 65 ℃.
5.3 inherent load
5.3.1 H class
After carrying body mass (100kg) 2.5 times the load components H class equipment shall not be damaged.
6.4 Test Press.
5.3.2 S Class
Carrying body mass (100kg) 4 times the load of training equipment should not be damaged.
The parts S class equipment shall be able to withstand body mass (100kg) 2 times the load.
100kg of body mass as the rated load.
After the test.
--- Other size deformation should not exceed 1%.
5.4 Handle
When tested in accordance with 6.5, the permanent deformation of the handle should not exceed 3%.
To reduce the risk of the handle pierced top, the top end portion of the handle diameter should be not less than 50mm. 6.1.1 Test Press.
5.5 pedals
Pedals should be a non-slip surface is not less than 300mm × 100mm, and when tested in accordance with ISO 5904 should be larger than the coefficient of friction
0.5.
Pedals inside and cutting-edge height shall be not less than 30mm fence.
5.6 Stability
By 6.6 when tested training equipment should not tipping.
5.7 Durability Test
When you press the 6.7 test, training equipment shall withstand.
Class H 12,000 cycles;
S class 100 000 cycles.
After the test is complete, training equipment according to manufacturer's instruction manual should be able to work properly and should not have any signs of damage.
GB 17498.9-2008/ISO 20957-9.2005
No activity handle elliptical trainer has a movable handle elliptical trainer
There are mobile and fixed grip handle elliptical trainer
1 --- display;
2 --- resistance;
3 --- pedal guards;
4 --- pedal platform;
5 --- movable handle;
6 --- fixed handle;
7 --- rack.
1 elliptical trainer legend
GB 17498.9-2008/ISO 20957-9.2005
5.8 Additional requirements for Class A
Displayed or set power P and the deviation of the actual input power of 50W in ± 5W, 50W was greater than ± 10%.
Follow the manufacturer's description of the power measurement test.
Additional requirements for level 5.9 B and C grade
See GB 17498.1-2008, power is not applied in watts.
6 Test methods
6.1 General
6.1.1 Dimensional Inspection.
6.1.2 visual inspection.
6.1.3 tactile inspection.
6.1.4 Operation test.
6.2 Test crushing and shearing points
equipment
--- For Class H, with provisions consistent with GB 6675 B probe;
--- For the S class, using the standard 6.5 GB 17498.1-2008 consistent test finger;
--- Figure 2 using the same test foot.
Test finger close to the movable member in all directions from the determination whether the test finger is stuck.
Height from the ground and placed within the range 600mm 2 identical test pin, this pin should be at least three test point A (FIG. 2)
On the ground and/or equipment, test the foot in this position should not be caught in moving parts.
Means test determines whether and/or test pin is stuck.
Millimeters
1 --- front-end.
Figure 2 Test pin
GB 17498.9-2008/ISO 20957-9.2005
6.3 Test surface temperature
Equipment. contact thermometer with an accuracy of ± 1 ℃.
Test environment for 18 ℃ to 25 ℃.
Using (100 ± 5) kg Test was tested.
Press 60 (1 ± 10%) r/min speed training equipment operating, maintaining 20min.
Resistance should be set to the maximum or reduced to 60r/min, the sports equipment cycle can continue without interruption.
Record the temperature elliptical trainer accessible parts exceeds 65 ℃.
To the associated speed training equipment, the use of load, exercise frequency 100kg adjusted to produce 180 (1 ± 10%) W of the test machine
Mechanical power. See GB/T 18153.
6.4 inherent load test
A balanced position on the pedal, to exert the necessary static load F in accordance with Class H or Class S different requirements, continued 5min. This load
Must be (900-1) applied to the pedal force at the maximum (see FIG. 3) by a (900-1) mm × mm of the surface.
3 inherent load test
Remove load measuring equipment to check for damage or deformation.
On the other pedal measured once again.
Unless otherwise stated in the specification, test, training equipment chassis should not be fixed on the ground.
6.5 grip test
For stationary handle of the handle at the maximum force of 1000N vertical force is applied to maintain 5min.
Then in the same position, with a width of (80 ± 5) mm belt tension 500N is applied in a horizontal direction, maintaining
5min.
Activities grip test should be applied in a rated load their pedals on the same side, and in the event that the maximum grip force direction
Applying a force at 1000N load and keep 5min.
Then applied to the training and direction of 90 ° in the direction of maximum stress at 200N force to maintain 5min.
6.6 Stability Test
It is tested at maximum force.
Let a weight (100 ± 5) kg, height (1750 ± 50) mm test personnel training in the normal position to 60r/min frequency
Rate training equipment stampede 1min.
The training equipment at two power directions (forward and backward) tilt 10 °, the other tilted 5 °.
NOTE. Power direction refers to the direction of movement of the user's body part.
6.7 Durability Test
Non-speed related elliptical trainer, each pedal load 50kg load, and set to 80% of the maximum resistance, with 60 (1 ±
10%) r/min test speed. If the equipment has a continuous power system, when tested, it should be set to the maximum power
GB 17498.9-2008/ISO 20957-9.2005
80%, and a load of 10kg is applied to the handle at the maximum force.
The speed of the associated elliptical trainer, a load of 50kg each pedal load, and 90 (1 ± 10%) r/min rotational speed durability
Test. as follows.
a) For H class to test 15min 15min and then stop the way the test, 12,000 consecutive cycles until completion
test;
b) For the S class, continuous 10h uninterrupted test 100 000 cycles.
Check whether the training equipment can be used according to the manufacturer's instructions properly.
6.8 A level test additional requirements
Comparison of mechanical power input and display of power.
Manufacturers shall indicate in the operating manual shows how to calculate the value of the input power.
Value should be displayed using the manufacturer test parameters calculated from the measured values within a range of ± 10% (measured value ± 5W less than 50W),
[See Chapter 7 b)].
Input power shall be the average 10min test period.
Device accuracy test 3 variables should not be less than ± 1%.
Additional testing requirements 6.9 B grade and C grade.
See GB 17498.1-2008.
7 Additional Operating Instructions
In addition to the requirements of Chapter 9 GB 17498.1-2008 outside, each elliptical trainer should provide easy to understand instructions.
Rated, manual shall include at least the following.
Information (or speed associated with the speed associated with) a) braking system;
b) for Class A, test process test parameters, including. the training speed and resistance test set;
c) training information. the lower limbs, upper limbs and body;
d) How to install and remove.
GB 17498.9-2008/ISO 20957-9.2005
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB 17498.9-2008_English be delivered?Answer: Upon your order, we will start to translate GB 17498.9-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB 17498.9-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB 17498.9-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|