GB/T 28679-2012 PDF English
Price & Delivery
US$130.00 · In stock · Download in 9 secondsGB/T 28679-2012: Remanufacturing of automotive components -- Assembly
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid
| Standard ID | USD | BUY PDF | Delivery | Standard Title (Description) | Status |
| GB/T 28679-2012 | 130 | Add to Cart | Auto, 9 seconds. | Remanufacturing of automotive components -- Assembly | Valid |
Click to Preview this PDF
Similar standards
GB/T 28679-2012: Remanufacturing of automotive components -- Assembly
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT28679-2012GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 43.020 T 40 Remanufacturing of Automotive Components - Assembly ISSUED ON: SEPTEMBER 3, 2012 IMPLEMENTED ON: JANUARY 1, 2013 Issued by: General Administration of Quality Supervision, Inspection and Quarantine; Standardization Administration of the People’s Republic of China.
Table of Contents
Foreword ... 3 1 Scope ... 4 2 Normative References ... 4 3 Terms and Definitions ... 4 4 Basic Requirements for Assembly ... 4Foreword
This Standard was drafted in accordance with the rules in GB/T 1.1-2009. This Standard was proposed by Ministry of Industry and Information Technology of the People’s Republic of China. This Standard shall be under the jurisdiction of National Technical Committee 114 on Road Vehicles of Standardization Administration of China (SAC/TC 114). The drafting organizations of this Standard: Dongfeng Motor Corporation; SINOTRUK Jinan Fuqiang Power Co., Ltd.; Guangzhou Huadu Worldwide Transmission Co., Ltd.; China Automotive Technology & Research Center Co., Ltd.; China Association of Automobile Manufacturers; Technical Center of China FAW Group Corporation; Great Wall Motor Co., Ltd.; Weichai Power (Weifang) Remanufacturing Co., Ltd.; Shanghai Automotive Industry Corporation (Group); Yuchai Remanufacturing Industry (Suzhou) Co., Ltd. The main drafters of this Standard: Hu Tao, Ma Mingchang, Wang Deqian, Zhou Zhengbing, Liu Yanrong, Yan Yiping, Yang Yimin, Yang Jie, Zhang Guorong, Yao Honghua, Chen Qi. Remanufacturing of Automotive Components - Assembly1 Scope
This Standard specifies the terms and definitions of remanufacturing of automotive components - assembly, as well as the basic requirements for assembly, etc. This Standard is applicable to the assembly of the remanufacturing of automotive components. The assembly of the remanufacturing of other motor vehicle parts may take this as a reference.2 Normative References
The following documents are indispensable to the application of this document. In terms of references with a specified date, only versions with a specified date are applicable to this document. In terms of references without a specified date, the latest version (including all the modifications) is applicable to this document. GB/T 26989 Automobile Recovery - Terminology3 Terms and Definitions
The terms and definitions defined in GB/T 26989 are applicable to this Standard.4 Basic Requirements for Assembly
4.1 The assembly environment of the parts shall comply with the stipulations of corresponding processes. 4.2 Before assembly, the parts shall be cleaned or rinsed. 4.3 The parts to be installed on the site of assembly must be qualified products. 4.4 During assembly, the remanufactured parts shall have assembly records, and the record retention period shall not be less than the record period of new products. 4.5 When new parts and components must be adopted, it shall strictly follow the relevant stipulations. 4.6 The assembly shall be carried out in accordance with the specified process requirements. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
