GB 19458-2004 PDF EnglishUS$160.00 · In stock · Download in 9 seconds
GB 19458-2004: Safety code for inspection of hazardous properties for dangerous goods - General specifications Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid
Similar standardsGB 19458-2004: Safety code for inspection of hazardous properties for dangerous goods - General specifications---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GB19458-2004 GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 13.300 A 80 Safety code for inspection of hazardous properties for dangerous goods - General specifications Issued on. MARCH 04, 2004 Implemented on. OCTOBER 01, 2004 Issued by. General Administration of Quality Supervision, Inspection and Quarantine of PRC. Standardization Administration of PRC. Table of ContentsForeword... 3 1 Scope... 4 2 Normative references... 4 3 Terms and definitions... 4 4 Categories... 6 5 Requirements... 8 6 Tests... 9 7 Signs... 10 8 Inspection rules... 10 Appendix A (Normative) Hazard priority list... 12 Appendix B (Normative) Sign of hazardous characteristics of dangerous goods... 13ForewordChapters 5, 6, 7, 8 of this standard are mandatory. The rest are recommended. The degree of consistency between this standard and the United Nations "Recommendations on the Transport of Dangerous Goods - Model Regulations" (13th revision) is non-equivalent. Its relevant technical content is consistent with the above regulations. The standard text format makes editorial changes, in accordance with GB/T 1.1-2000. Appendix A and Appendix B of this standard are normative appendixes. This standard was proposed by AND shall be under the jurisdiction of the National Standardization Technical Committee on Hazardous Chemicals Management (SAC/TC 251). Responsible drafting organizations of this standard. AQSIQ Central Laboratory of Dangerous Goods. Participated drafting organizations of this standard. Tianjin Entry-Exit Inspection and Quarantine Bureau, Asia-Pacific Dangerous Goods Association, Jiangnan University. The main drafters of this standard. Wang Libing, Zhao Guoqing, Huang Yong, Tian Jiayin, Lv Gang, Sun Shujun. This standard is formulated for the first time. Safety code for inspection of hazardous properties for dangerous goods - General specifications1 ScopeThis standard specifies the terms and definitions, classification, requirements, testing, marking, inspection rules of dangerous goods. This standard is applicable to the inspection of dangerous characteristics of dangerous goods.2 Normative referencesThe provisions in following documents become the provisions of this Standard through reference in this Standard. For the dated references, the subsequent amendments (excluding corrections) or revisions do not apply to this Standard; however, parties who reach an agreement based on this Standard are encouraged to study if the latest versions of these documents are applicable. For undated references, the latest edition of the referenced document applies. GB 190 Packing symbol of dangerous goods GB/T 3690-1992 Classification and sign of commonly used dangerous chemical products United Nations Recommendations on the Transport of Dangerous Goods - Model Regulations (13th revision)3 Terms and definitionsThe following terms and definitions, which are defined in GB/T 3690 and "Recommendations on the Transport of Dangerous Goods - Model Regulations" (13th revision) apply to this standard. 3.1 Explosive Solid or liquid substances which, under external action (such as heat, pressure, impact, etc.), can undergo violent chemical reactions, generate a large amount of gas and heat instantaneously, cause the surrounding pressure to rise rapidly and explode, thereby damaging the surrounding environment items. 3.2 Gas Substances which have a vapor pressure greater than 300 kPa at 50 °C. OR a substance that is completely gaseous at a standard pressure of 101.3 kPa at a temperature including 20 °C. 3.3 Flammable liquid Flammable liquids, liquid mixtures or liquids containing solid substances.4 Categories4.1 Category of dangerous goods 4.1.1 Dangerous goods are divided into 9 categories, according to their specific hazards or the most important hazards. Some categories are subdivided into items. The order of the numbers of the categories and items is not in order of degree of hazard. 4.1.2 Category 1.Explosives 4.1.3 Category 2.Gases 4.1.4 Category 3.Flammable liquids 4.1.5 Category 4.Flammable solids; spontaneously combustible; contact water emit flammable gases 4.1.6 Category 5.Oxidizers and organic peroxides 4.1.7 Category 6.Toxic and infectious substances 4.1.8 Category 7.Radioactive substances 4.1.9 Category 8.Corrosive substances 4.1.10 Category 9.Miscellaneous dangerous substances and articles 4.2 Category of dangerous goods packaging Except for the dangerous goods of category 1, category 2, category 7, items 5.2 and 6.2, the packaging of other types of dangerous goods can be divided into three packing levels, according to the degree of danger, namely.5 Requirements5.1 Safety requirements 5.1.1 The producer of a new product or the entrusting party applying for the classification of the product shall provide all available safety data about the product, such as toxicity data. 5.1.2 When there is suspicion of explosiveness, a small-scale preliminary test shall be carried out first; then the test of a larger quantity of substances shall be carried out. Preliminary tests include determining the sensitivity of the substance to mechanical stimuli (impact and friction) as well as to heat and flame. 5.2 Test requirements 5.2.1 The test of hazardous characteristics shall be carried out, according to the test conditions. If no tolerance is given in the experiments, this means that the accuracy is determined by the number of decimal places for any given dimension, e.g., 1.1 means 1.05 to 1.15. 5.2.2 The composition of the experimental sample shall be consistent with the concentration of the substance to be transported. 5.2.3 All test materials, in contact with the test substance, shall not affect the test results. If the effect cannot be ruled out, precautions shall be taken, to prevent it from affecting the experimental results. The precautionary measures taken shall be listed in the test report.6 Tests6.1 Carry out the inspection, item by item, according to the 9 categories of dangerous goods classification tests, which are stipulated in the United Nations "Recommendations on the Transport of Dangerous Goods - Model Regulations" (13th revision), unless there is a definite basis to exempt some items. 6.2 When a substance, mixture or solution has more than one hazard, meanwhile its name is not included in the list of dangerous goods in Chapter 3.2 of the United Nations "Recommendations on the Transport of Dangerous Goods - Model Regulations" (13th revision), its category shall be determined in accordance with the following order. 6.3 For goods, which have multiple hazards BUT are not specifically listed in the Dangerous Goods List in Chapter 3.2 of the United Nations "Recommendations on the Transport of Dangerous Goods - Model Regulations" (13th revision), it means that the strictest packing category of these goods of relevant hazards of the goods has priority over other packing groups, as shown in Appendix A.7 Signs7.1 Types of signs There are 9 categories and 21 types of signs for dangerous characteristics of dangerous goods, see Appendix B. 7.2 Graphics of sign The shape of the sign is a square (diamond), which has an angle of 45°. The minimum size is generally 100 mm x 100 mm. It consists of four parts. 7.3 Use of sign 7.3.1 Principles of using the sign When a dangerous goods has more than one hazard, in addition to using the sign to indicate the main hazard category, the corresponding sign of other important hazard categories shall also be used.8 Inspection rules8.1 Inspection items. Carry out inspection item by item according to the requirements of Chapter 5, Chapter 6, Chapter 7 of this standard. 8.2 Under the following circumstances, the manufacturer shall apply to the relevant inspection department for inspection of hazardous characteristics, before submitting for transportation. 8.3 Each type of hazardous characteristics shall be tested and judged according to effective test methods. 8.4 For hazardous characteristics, that can only be determined by multiple experiments, effective test procedures shall be established. 8.5 Without the report of hazardous characteristics, the transport, sale, use of dangerous goods with unknown hazards are not allowed. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB 19458-2004 be delivered?Answer: The full copy PDF of English version of GB 19458-2004 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB 19458-2004_English with my colleagues?Answer: Yes. The purchased PDF of GB 19458-2004_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB 19458-2004 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.How to buy and download a true PDF of English version of GB 19458-2004?A step-by-step guide to download PDF of GB 19458-2004_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB 19458-2004". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
