|
Std ID |
Description (Standard Title) |
|
QC/T 6-1992
|
Compiling rules for automobile production schedule
|
|
QC/T 7-1992
|
Numbering rules for design documents of automobiles
|
|
QC/T 8-1992
|
(Automotive gauges)
|
|
QC/T 9-1992
|
(Automobile, motorcycle magnetic induction tachometer)
|
|
QC/T 29010-1991
|
(Low automotive wire connector type, size and technical requirements)
|
|
QC/T 29011-1991
|
Wire joint type, size and technical requirements for automobile ignition wire
|
|
QC/T 29013-1991
|
Wire joint type, size and technical requirements for automobile storage battery
|
|
QC/T 29015-1991
|
(Dump truck tailgate locking device technology)
|
|
QC/T 29017-1991
|
Automotive molded plastic parts without individual tolerance limit the size of the deviation
|
|
QC/T 29018-1991
|
Metallographic test for carbonitriding gear of automobile
|
|
QC/T 29020-1991
|
(Minivan stereotypes test procedures)
|
|
QC/T 29021-1991
|
(Minivan dust tightness test methods)
|
|
QC/T 29022-1991
|
(Minivan traveling durability test methods)
|
|
QC/T 29023-1991
|
(Minivan fuel consumption test method)
|
|
QC/T 29025-1991
|
(Car radiator core tube with type size)
|
|
QC/T 29026-1991
|
(Lifter automotive test methods)
|
|
QC/T 29027-1991
|
(Automotive glass lifter technical conditions)
|
|
QC/T 29028-1991
|
(Performance test methods for car locks with ignition switch turned)
|
|
QC/T 29029-1991
|
(Automotive ignition switch with steering lock technical conditions)
|
|
QC/T 29030-1991
|
(Ignition coil installation and connection dimensions)
|
|
QC/T 29031-1991
|
(Car engine bearing plating technical conditions)
|
|
QC/T 29032-1991
|
(Automotive air filter clogged alarm sensors)
|
|
QC/T 29033-1991
|
(Automotive Hydraulic Transmission Performance test methods)
|
|
QC/T 29034-1991
|
(Chinese Industry Standard)
|
|
QC/T 29035-1991
|
Technical specifications for automobile plate spring
|
|
QC/T 29037-1991
|
(Minivan Reliability running test method)
|
|
QC/T 29041-1991
|
(Minivan vehicle transmission housing strength test method)
|
|
QCN 29005-1991
|
(Automotive wiring harness Low quality grading (Trial))
|
|
QCN 29006-1991
|
(Automotive products quality inspection procedures)
|
|
QCN 29007-1991
|
(Automotive products quality inspection and assessment requirements)
|
|
QCN 29008.10-1991
|
(Automotive Products Quality Inspection assembly assessment method)
|
|
QCN 29008.11-1991
|
(Auto parts product quality inspection evaluation method)
|
|
QCN 29008.1-1991
|
(Automotive product quality inspection vehicle assembly adjustment and appearance evaluation method)
|
|
QCN 29008.12-1991
|
(Car accessories product quality inspection evaluation method)
|
|
QCN 29008.13-1991
|
(Automotive Products Quality Inspection cleanliness evaluation method)
|
|
QCN 29008.14-1991
|
(Automotive product quality inspection checks of engine performance evaluation method)
|
|
QCN 29008.15-1991
|
(Automotive product quality inspection engine reliability evaluation method)
|
|
QCN 29008.2-1991
|
(Automotive vehicle product quality inspection checks evaluation method)
|
|
QCN 29008.3-1991
|
(Automotive product quality inspection vehicle reliability assessment method)
|
|
QCN 29008.4-1991
|
(Automotive product quality inspection reliability calculation method and fault mode)
|
|
QCN 29008.5-1991
|
(Automotive product quality inspection with vehicle chassis assembly adapted to adjust and appearance evaluation method)
|
|
QCN 29008.6-1991
|
(Automotive product quality inspection body tightness evaluation method)
|
|
QCN 29008.7-1991
|
(Auto body paint coating product quality inspection evaluation method)
|
|
QCN 29008.8-1991
|
(Automotive Products Quality Inspection Body body evaluation method)
|
|
QCN 29008.9-1991
|
(Automotive air conditioning system of product quality inspection evaluation method)
|
|
QCN 29008-1991
|
(Chinese Industry Standard)
|
|
QCN 29009-1991
|
(Automotive wire connectors technical conditions)
|
|
QCN 29010-1991
|
(Automotive low-voltage wire connectors. Type, size and technical requirements)
|
|
QCN 29011-1991
|
(Automotive ignition wire connectors. Type, size and technical requirements)
|
|
QCN 29012-1991
|
(Garden column automotive wire connector type, size and technical requirements)
|
|
QCN 29013-1991
|
(Automotive Battery wire connectors. Type, size and technical requirements)
|
|
QCN 29014-1991
|
(Moped Carburetor technical conditions)
|
|
QCN 29015-1991
|
(Dump truck tailgate locking device technology)
|
|
QCN 29016-1991
|
(Automotive engine valve Quality Grading)
|
|
QCN 29017-1991
|
(Automotive injection molded plastic parts is not the limit deviation tolerances)
|
|
QCN 29018-1991
|
(Car carbonitriding gear metallography)
|
|
QCN 29019-1991
|
(Special Purpose Vehicle PTO amount grading system)
|
|
QCN 29024-1991
|
(Moped Carburetor test methods)
|
|
QCN 29035-1991
|
(Automotive leaf spring technical conditions)
|
|
QCN 29036-1991
|
(Minivan technical conditions)
|
|
QCN 9015-1991
|
(Dump Truck sideboard locking device technology)
|
|
QCN 29001-1990
|
(Dongfeng truck drive axle assembly EQ1090E technical conditions)
|
|
QCN 29002-1990
|
(Dongfeng truck drive axle assembly EQ1090E quality grading)
|
|
QCN 29003-1990
|
(Dongfeng truck axle assembly EQ1090E technical conditions)
|
|
QCN 29004-1990
|
(Dongfeng truck axle assembly EQ1090E quality grading)
|
|
QCN 29005-1990
|
(Automotive wiring harness Low Quality Grading)
|
|
QC/T 1092-2018
|
Static stiffness test methods for 15-degree drop center commercial vehicle steel wheels
|
|
QC/T 1093-2018
|
Side impact tube beam for passenger car
|
|
QC/T 243-2018
|
Flatness requirements and test methods of wheel attachment face
|
|
QC/T 456-2018
|
Bulk vehicles for particle grain
|
|
QC/T 695-2018
|
Automotive relay
|
|
QC/T 696-2018
|
The centralized lubrication system of automotive chassis
|
|
QC/T 790-2018
|
Performance requirements and bench test methods of brake chamber for automotive vehicle and trailer
|
|
QC/T 932-2018
|
[Including 2019XG] Emergency shutoff valve of road tanker for dangerous liquid goods transportation
|
|
QC/T 1094-2018
|
General specification of lithium ion batteries for motorcycle starting
|
|
QC/T 1095-2018
|
Performance requierments and bench test methods of motor vehicle assist vacuum pump
|
|
QC/T 1096-2018
|
Bench test methods of fatigue life for torsion beam rear axle of passenger cars
|
|
QC/T 1097-2018
|
Bench test methods of fatigue life for front axle horizontal module of passenger cars
|
|
QC/T 1098-2018
|
Technical specification for powder metallurgy hub used in automotive clutch
|
|
QC/T 1099-2018
|
Specification for collapsible spacer used in automotive drive head assembly
|
|
QC/T 311-2018
|
Performance requirements and bench test methods of motor vehicle brake master cylinder
|
|
QC/T 491-2018
|
Automobile shock absorber technique requirements and test methods
|
|
QC/T 564-2018
|
Performance requirements and test methods for passenger car service brake
|
|
QC/T 645-2018
|
Tow truck
|
|
QC/T 788-2018
|
Performance requirements and bench test methods of automobile pedal device
|
|
QC/T 1100-2019
|
Liquid asphalt tank truck
|
|
QC/T 1101-2019
|
Electric heater for electric vehicle
|
|
QC/T 1102-2019
|
Power sliding door system for automobile
|
|
QC/T 1103-2019
|
12-point head heat resistant nuts
|
|
QC/T 1104-2019
|
12-point head heat resistant bolts
|
|
QC/T 1105-2019
|
Earth bolt performance and test methods
|
|
QC/T 1106-2019
|
Retraining barrier for passenger seat
|
|
QC/T 254-2019
|
The cash carrying vehicles
|
|
QC/T 51-2019
|
Sweeper truck
|
|
QC/T 597.3-2019
|
Specification for fastener with adhesive coating - Part 3: Sealing coatings
|
|
QC/T 699-2019
|
Tail-lifts for vehicles
|
|
QC/T 719-2019
|
Liquid asphalt tank truck
|
|
QC/T 824-2019
|
Rotational speed sensor for automobile
|
|
QC/T 1107-2019
|
(Compressed garbage truck)
|
|
QC/T 1108-2019
|
(Solenoid valve for commercial vehicles)
|