|
US$259.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
YS/T 845-2012: Aluminum alloy round billets by spray forming
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| YS/T 845-2012 | English | 259 |
Add to Cart
|
3 days [Need to translate]
|
Aluminum alloy round billets by spray forming
| Valid |
YS/T 845-2012
|
PDF similar to YS/T 845-2012
Basic data | Standard ID | YS/T 845-2012 (YS/T845-2012) | | Description (Translated English) | Aluminum alloy round billets by spray forming | | Sector / Industry | Nonferrous Metallurgy Industry Standard (Recommended) | | Classification of Chinese Standard | H61 | | Classification of International Standard | 77.150.10 | | Word Count Estimation | 10,147 | | Quoted Standard | GB/T 3190; GB/T 3199; GB/T 3246.1; GB/T 3246.2; GB/T 7999; GB/T 8170; GB/T 17432; GB/T 20975.1; GB/T 20975.10; GB/T 20975.11; GB/T 20975.12; GB/T 20975.13; GB/T 20975.14; GB/T 20975.15; GB/T 20975.16; GB/T 20975.17; GB/T 20975.18; GB/T 20975.19; GB/T 2097 | | Regulation (derived from) | Ministry of Industry and Information Technology Bulletin 2012 No. 70; industry standard filing Notice 2013 No. 3 (total 159) | | Issuing agency(ies) | Ministry of Industry and Information Technology | | Summary | This standard specifies the spray forming aluminum alloy ingot terms and definitions, requirements, test methods, inspection rules and signs, packaging, transportation, storage and purchase order (or contract) content. This standard applies to extrusion, | YS/T 845-2012: Aluminum alloy round billets by spray forming---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Aluminum alloy round billets by spray forming
ICS 77.150.10
H61
People's Republic of China Nonferrous Metals Industry Standard
Injection molded aluminum ingots
Issued on. 2012-12-28
2013-06-01 implementation
Ministry of Industry and Information Technology of the People's Republic of China released
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard by the national non-ferrous metals Standardization Technical Committee (SAC/TC243) centralized.
This standard is drafted by. Jiangsu ho then spray forming alloy Limited.
Participated in the drafting of this standard. Shanghai Jiaotong University, Northeast Light Alloy Co., Ltd., the aluminum branch of Northwest Aluminum, Shandong Yankuang
Light Alloy Co., Ltd.
The main drafters. Zhang Hao, Zhang Jie, Yang Jianzhong, Wu Xinfeng, Hu Danian, He Wei, Feng Yongping, Xiao Yang, Liu Jinxia.
Injection molded aluminum ingots
1 Scope
This standard specifies the spray forming aluminum alloy ingots terms and definitions, requirements, test methods, inspection rules and signs, packaging, transportation, storage
Deposit and purchase order (or contract) content.
This standard applies to extrusion, forging and other pressure processing method for production, the cylindrical billet aluminum injection molding (hereinafter referred to as ingots).
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 3190 Wrought aluminum and aluminum alloy chemical composition
GB/T 3199 aluminum and aluminum alloy products - Packing, marking, transportation and storage
GB/T 3246.1 aluminum and aluminum alloys products inspection method - Part 1 Deformation. microstructure inspection method
GB/T 3246.2 aluminum and aluminum alloys products inspection method - Part 2 Deformation. low magnification inspection method
GB/T 7999 aluminum and aluminum alloys Optical emission spectroscopy method
GB/T 8170 repair value expressed about the rules and limit values and judgment
GB/T 17432 Wrought aluminum and aluminum alloy chemical analysis sampling method
GB/T 20975 (all parts), chemical analysis of aluminum and aluminum alloys
GB/T 22638.1 aluminum test methods - Part 1. Determination of thickness gravimetric method
GB/T 26492.1 deformable aluminum and aluminum alloy ingot casting and machining product defects - Part 1. ingot defects
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
Injection molding sprayforming
Metal or alloy melt ejected through the atomizing nozzle after droplet deposition and solidification and rapid method for the formation of the blank is formed.
3.2
Deposition streamline depositionstreamline
For reciprocating scanning movement of the atomizing nozzle metal or alloy atomized droplets deposited in the deposition trajectory blank cross-section is formed.
4 Requirements
4.1 Categories
4.1.1 grade specifications
Round ingot grade specifications shall comply with the requirements in Table 1. When the demand side need other brands, specifications, in the order determined after consultation by both parties
Single (or contract) are indicated.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of YS/T 845-2012_English be delivered?Answer: Upon your order, we will start to translate YS/T 845-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of YS/T 845-2012_English with my colleagues?Answer: Yes. The purchased PDF of YS/T 845-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|