|
US$209.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
YS/T 698-2009: Magnesium and magnesium-alloy roll-casting plates and sheets
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| YS/T 698-2009 | English | 209 |
Add to Cart
|
3 days [Need to translate]
|
Magnesium and magnesium-alloy roll-casting plates and sheets
| Valid |
YS/T 698-2009
|
PDF similar to YS/T 698-2009
Basic data | Standard ID | YS/T 698-2009 (YS/T698-2009) | | Description (Translated English) | Magnesium and magnesium-alloy roll-casting plates and sheets | | Sector / Industry | Nonferrous Metallurgy Industry Standard (Recommended) | | Classification of Chinese Standard | H61 | | Classification of International Standard | 77.150.20 | | Word Count Estimation | 8,862 | | Date of Issue | 2009-12-04 | | Date of Implementation | 2010-06-01 | | Quoted Standard | GB/T 228; GB/T 4296; GB/T 4297; GB/T 5153; GB/T 13748 | | Regulation (derived from) | MIIT [2009] No. 66 | | Issuing agency(ies) | Ministry of Industry and Information Technology | | Summary | This standard specifies the magnesium and magnesium alloy casting sheet requirements, test methods, inspection rules, packaging, labeling, transportation and storage. This standard applies to magnesium and magnesium alloy casting plate (hereinafter referred to as "casting sheet"). | YS/T 698-2009: Magnesium and magnesium-alloy roll-casting plates and sheets---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Magnesium and magnesium-alloy roll-casting plates and sheets
ICS 77.150.20
H61
People's Republic of China Nonferrous Metals Industry Standard
Magnesium and magnesium alloy casting sheet
Posted 2009-12-04
2010-06-01 implementation
Ministry of Industry and Information Technology of the People's Republic of China released
Foreword
This standard by the National Standardization Technical Committee of non-ferrous metals and centralized.
This standard is drafted by. Shanxi Wenxi silver Magnesium (Group) Co., Ltd., Chinalco Luoyang Copper Co., Ltd.
Participated in the drafting of this standard. County costs silver Magnesium Co., Ltd.
The main drafters of this standard. Wujiang before, Wen Yu, Yanglong Long, Sun Weiming, MULTIPURPOSE UTILIZATION, Bai Yongjun, Wang Feng.
Magnesium and magnesium alloy casting sheet
1 Scope
This standard specifies the requirements for magnesium and magnesium alloy casting sheet, test methods, inspection rules, packaging, labeling, transportation and storage.
This standard applies to magnesium and magnesium alloy casting sheet (hereinafter referred to as "casting plate").
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 228 metal materials at room temperature tensile test method
GB/T 4296 wrought magnesium alloy microstructure inspection method
GB/T 4297 wrought magnesium alloy low magnification inspection method
GB/T 5153 wrought magnesium and magnesium alloy grades and chemical composition
GB/T 13748 (all parts) magnesium and magnesium alloy chemical analysis method
3 Terms
The following terms apply to this standard.
3.1
Magnesium and magnesium alloy melt into the constantly rotating two roll nip solidified while rolling deformation produced by the sheet. Cross section
Rectangular, generally after shearing or cutting edge, and straight delivery.
3.2
Any two points along the casting sheet length measured in the direction (usually measured across the center plate) maximum difference in thickness.
3.3
Casting plate on either a cross section, with the largest difference between any two points centrosymmetric measured thickness.
3.4
Plate on either a cross-section, the thickness of the middle and two edge thickness difference relative to the average percentage for the central thickness.
4 Requirements
4.1 Categories
4.1.1 grade, status and specifications
Casting sheet grades, status and specifications shall comply with the requirements of Table 1. When users need other grades, status and specifications, by both parties
Negotiated and specified in the contract.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of YS/T 698-2009_English be delivered?Answer: Upon your order, we will start to translate YS/T 698-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of YS/T 698-2009_English with my colleagues?Answer: Yes. The purchased PDF of YS/T 698-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|