|
US$499.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
YS/T 12-2012: Technical specification for flame smelting furnaces and maintaining furnaces used for aluminum and aluminum alloys
Status: Valid YS/T 12: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| YS/T 12-2012 | English | 499 |
Add to Cart
|
4 days [Need to translate]
|
Technical specification for flame smelting furnaces and maintaining furnaces used for aluminum and aluminum alloys
| Valid |
YS/T 12-2012
|
| YS/T 12-1991 | English | 519 |
Add to Cart
|
4 days [Need to translate]
|
(Aluminum and aluminum flame melting furnace, holding furnace)
| Obsolete |
YS/T 12-1991
|
PDF similar to YS/T 12-2012
Basic data | Standard ID | YS/T 12-2012 (YS/T12-2012) | | Description (Translated English) | Technical specification for flame smelting furnaces and maintaining furnaces used for aluminum and aluminum alloys | | Sector / Industry | Nonferrous Metallurgy Industry Standard (Recommended) | | Classification of Chinese Standard | H92 | | Classification of International Standard | 77.180 | | Word Count Estimation | 19,193 | | Older Standard (superseded by this standard) | YS/T 12-1991 | | Quoted Standard | GB/T 2587; GB/T 2588; GB/T 2589; GB/T 2624.1; GB/T 2988; GB/T 2994; GB/T 3003; GB/T 3485; GB/T 3486; GB/T 3766; GB/T 3994; GB/T 3996; GB 5226.1; GB 5959.1; GB 6222; GB/T 10066.1; GB/T 10067.1; GB/T 13283; GB/T 15969.2; GB/T 19839; GB 50211; GB 50254; GB 5 | | Regulation (derived from) | Ministry of Industry and Information Technology Bulletin 2012 No. 70; industry standard filing Notice 2013 No. 3 (total 159) | | Issuing agency(ies) | Ministry of Industry and Information Technology | | Summary | This standard specifies the classification and diagrams of aluminum and aluminum melting furnace and flame holding furnace flame, requirements, test methods, inspection rules, products and complete sets of technical documents with the furnace. This standa | YS/T 12-2012: Technical specification for flame smelting furnaces and maintaining furnaces used for aluminum and aluminum alloys
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Technical specification for flame smelting furnaces and maintaining furnaces used for aluminum and aluminum alloys
ICS 77.180
H92
People's Republic of China Nonferrous Metals Industry Standard
Replacing YS/T 12-1991
Aluminum and aluminum alloy flame melting furnace, holding furnace technical conditions
Issued on. 2012-12-28
2013-06-01 implementation
Ministry of Industry and Information Technology of the People's Republic of China released
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
Instead of the standard YS/T 12-1991 "aluminum and aluminum alloy flame melting furnace, holding furnace."
Compared with this standard YS/T 12-1991, the main differences are as follows.
--- Increasing the typical furnace schematic;
--- Increasing the flame on aluminum and aluminum melting furnace, holding furnace energy efficiency and improve the thermal efficiency of the furnace, the technical requirements of burning rate;
--- Increasing the flame on aluminum and aluminum melting furnace, holding furnace combustion products and mouth dust collection, technical requirements of environmental emissions;
--- Increase the technical requirements for aluminum and aluminum alloy flame melting furnace, holding furnace automatic control and safety aspects of the operation;
--- Increasing the flame on aluminum and aluminum melting furnace, holding furnace with equipment technical requirements;
--- Added a large tonnage of aluminum and aluminum flame melting furnace, holding furnace basic performance;
--- Increasing the hydraulic tilting flame melting furnace, holding furnace basic technical requirements.
This standard by the national non-ferrous metals Standardization Technical Committee (SAC/TC243) centralized.
Drafting of this standard. Guangdong Jianmei Aluminum Factory (Group) Co., Ltd., Northeast Light Alloy Co., Ltd., Southwest Aluminum (set
Group) limited liability company, Shandong Nanshan Aluminum Co., Ltd., Shandong Yankuang Light Alloy Co., Ltd., Fujian Nanping Aluminum Co.,
Guangdong Xingfa Aluminium Co., Ltd, Sichuan Guanghan Samsung Aluminum Co., Longkou Conglin Aluminum Co., Ltd., Guangdong Haomei Aluminum Co.
Division Guangya Aluminum Co., Ltd. Suzhou Bo kiln.
The main drafters of this standard. Lu Jiyan, He Yongping, Albert Lee, Zhaozu Qiu, Li Zhe, the European Qing Feng, Zhang Feng stream, summer group show, SOCIETY FOR Hao Zhishun,
Zhouchun Rong, Pan learned, Yu Zhihua.
This standard replaces the standards previously issued as follows.
--- YS/T 12-1991.
Aluminum and aluminum alloy flame melting furnace, holding furnace technical conditions
1 Scope
This standard specifies the classification and diagrams of aluminum and aluminum melting furnace and flame holding furnace flame, requirements, test methods, inspection rules and yield
Products with the furnace and the complete set of technical documents.
This standard applies to gas or liquid fuel flame of aluminum and aluminum melting furnace, holding furnace (hereinafter referred to as flame furnace).
This standard does not apply to vertical flame crucible furnace and smelting furnace.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 2587 General equilibrium energy using equipment
GB/T 2588 General Equipment Thermal efficiency calculation
GB/T 2589 General Principles of comprehensive energy consumption calculation
GB/T 2624.1 with the differential pressure measuring device mounted to round pipe full pipe fluid flow - Part 1. General principles and
Claim
GB/T 2988 high alumina brick
GB/T 2994 high alumina refractory mortar
GB/T 3003 and refractory ceramic fiber products
GB/T 3485 evaluating the rationality of electricity Technical Guidelines
GB/T 3486 evaluating the rationality of thermal Technical Guidelines
GB/T 3766 Hydraulic System General technical conditions
GB/T 3994 clay of insulating firebrick
GB/T 3996 diatomite insulation products
GB 5226.1 mechanical and electrical safety of machinery - Electrical equipment - Part 1. General requirements
Safety - Part 1 GB 5959.1 electric apparatus. General requirements
GB 6222 industrial enterprises Gas Safety Regulations
GB/T 10066.1 Test Method for electric devices - Part 1. General section
GB/T 10067.1 electric equipment basic technical conditions - Part 1. General section
GB/T 13283 industrial process measurement and control instrumentation and display instruments Accuracy class
GB/T 15969.2 Programmable Controllers Part 2. Equipment Requirements and Tests
GB/T 15969.4 programmable logic controller Part 4. User Guide
GB/T 15969.5 Programmable controllers - Part 5. Communication
GB/T 19839 industrial fuel gas combustion GM technology
GB 50211 industrial furnace masonry construction and acceptance
GB 50254 electrical low-voltage electrical equipment installation engineering construction and acceptance
GB 50387 metallurgical machinery hydraulic, lubrication and pneumatic equipment installation acceptance
GB 50482 of aluminum processing plant design specifications
GB 30078 deformable aluminum and aluminum alloy ingot production safety norms
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of YS/T 12-2012_English be delivered?Answer: Upon your order, we will start to translate YS/T 12-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of YS/T 12-2012_English with my colleagues?Answer: Yes. The purchased PDF of YS/T 12-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version YS/T 12-2012?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version YS/T 12-2012 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|