YS/T 1069-2015 (YS/T1069-2015, YST 1069-2015, YST1069-2015)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| YS/T 1069-2015 | English | 149 |
Add to Cart
|
3 days [Need to translate]
|
Gold-beryllium alloy evaporation material
| Valid |
YS/T 1069-2015
|
Standards related to: YS/T 1069-2015
| Standard ID | YS/T 1069-2015 (YS/T1069-2015) | | Description (Translated English) | Gold-beryllium alloy evaporation material | | Sector / Industry | Nonferrous Metallurgy Industry Standard (Recommended) | | Classification of Chinese Standard | H68 | | Classification of International Standard | 77.150.99 | | Word Count Estimation | 5,571 | | Date of Issue | 2015-04-30 | | Date of Implementation | 2015-10-01 | | Quoted Standard | GB/T 15072.11; GB/T 15077; GB/T 26292-2010; GJB 950.1A | | Drafting Organization | Your research Platinum Ltd.; Technical and Economic Research Institute of Nonferrous Metals | | Administrative Organization | National Non-Ferrous Metals Standardization Technical Committee (SAC/TC 243) | | Regulation (derived from) | Ministry of Industry and Information Technology Announcement (2015 No. 28) | | Proposing organization | National Non-Ferrous Metals Standardization Technical Committee (SAC/TC 243) | | Issuing agency(ies) | Ministry of Industry and Information Technology of the People's Republic of China | | Summary | This Standard specifies the gold beryllium alloy evaporation material technical requirements, test methods and inspection rules and signs, packaging, transportation, storage and quality certificate with your order (or contract) content. This Standard applies to the semiconductor industry gold beryllium evaporated material. | YS/T 1069-2015
(Beryllium metal evaporation material)
ICS 77.150.99
H68
People's Republic of China Nonferrous Metals Industry Standard
Beryllium metal evaporation materials
Issued on. 2015-04-30
2015-10-01 implementation
Ministry of Industry and Information Technology of the People's Republic of China released
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard by the national non-ferrous metals Standardization Technical Committee (SAC/TC243) and focal points.
This standard was drafted. Your research Platinum Ltd., Technical and Economic Research Institute of Nonferrous Metals.
The main drafters of this standard. Xie Hong Chao, Yang Heng shore to Lei, Zhu Yong, Zhu Wuxun.
Beryllium metal evaporation materials
1 Scope
This standard specifies the gold beryllium alloy evaporation material technical requirements, test methods and inspection rules and signs, packaging, transportation, storage and quality certificate
SHEET with your order (or contract) content.
This standard applies to the semiconductor industry with beryllium metal evaporation materials.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 15072.11 precious metal alloys - Determination of beryllium content of gadolinium and Gold alloys by inductively coupled plasma atomic
Emission Spectrometry
GB/T 15077 precious metals and their alloys geometry measurement methods
GB/T 26292-2010 gold-germanium evaporation material
GJB950.1A trace element analysis of precious metals and their alloys
3 Requirements
3.1 Categories
Press alloying elements are divided into three grades. Au99.5Be, Au99Be, Au98Be.
3.2 Chemical composition
Chemical composition of the product shall comply with the requirements in Table 1.
Table 1 Chemical Composition% (mass fraction)
Alloy
main ingredient
Impurities
no greater than
Total Pb Sb Bi Zn Cd Au Be Fe
Au99.5Be balance 0.45-0.55 0.002 0.002 0.002 0.002 0.005 0.005 0.02
Au99Be margin 0.90 1.10 0.002 0.002 0.002 0.002 0.005 0.005 0.02
Au98Be margin 1.98 ~ 2.20 0.002 0.002 0.002 0.002 0.005 0.005 0.02
3.3 geometry and bias
Product geometry and tolerances shall comply with the provisions of Table 2. By mutual agreement, provide additional product specifications.
...
|