|
US$169.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
WBT1034-2018: Specification for storage service of passenger car
Status: Valid WBT1034: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| WB/T 1034-2018 | English | 169 |
Add to Cart
|
3 days [Need to translate]
|
Specification for storage service of passenger car
| Valid |
WB/T 1034-2018
|
| WB/T 1034-2006 | English | 319 |
Add to Cart
|
3 days [Need to translate]
|
Specification of storage service for passenger car
| Obsolete |
WB/T 1034-2006
|
PDF similar to WBT1034-2018
Basic data | Standard ID | WB/T 1034-2018 (WB/T1034-2018) | | Description (Translated English) | Specification for storage service of passenger car | | Sector / Industry | Chinese Industry Standard (Recommended) | | Classification of Chinese Standard | R10 | | Classification of International Standard | 03.220.20 | | Word Count Estimation | 7,728 | | Date of Issue | 2018-07-16 | | Date of Implementation | 2018-08-01 | | Older Standard (superseded by this standard) | WB/T 1034-2006 | | Regulation (derived from) | National Development and Reform Commission Announcement No. 8 of 2018 | | Issuing agency(ies) | National Development and Reform Commission of the People's Republic of China | WBT1034-2018: Specification for storage service of passenger car---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Specification for storage service of passenger car
ICS 03.220.20
R10
People's Republic of China Logistics Industry Standard
Replace WB/T 1034-2006
Passenger car storage service specification
Published on.2018-07-16
2018-08-01 implementation
National Development and Reform Commission of the People's Republic of China
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces WB/T 1034-2006 "Cargo Storage Service Specification". Compared with WB/T 1034-2006, except for editorial
The main technical changes outside the revision are as follows.
--- Revised the scope of Chapter 1;
--- Revised the definition of Chapter 3 warehousing instructions;
--- Deleted 4.1 should have legal documents issued by the relevant state departments;
--- Modified the driver should have the "People's Republic of China Motor Vehicle Driving License" issued by the Public Security Bureau, the operators should be familiar with the training
Warehouse management business (see 4.7);
--- Increased the need to set up different warehousing services according to different warehouse types (see 5.1.1);
--- Revised and established a clear logo (see 5.1.7);
---Modified storage space (see 5.3);
--- Revised the distance between the warehouse site and the storage operation area and the surrounding overhead high-voltage power lines should comply with the implementation of the Electric Power Facilities Protection Regulations
Requirements of the Rules (see 5.3.2);
--- Increased the availability of three-dimensional storage technology (see 5.3.4);
--- Increased the fire separation between mechanical parking devices and buildings with more than 20 parking spaces should not be less than 6m (see
5.4.2);
---Modified automatic fire alarm system, automatic sprinkler system and smoke extraction facilities (see 5.4.3);
--- Increased the number of mechanical garages without lanes and no personnel to stay indoors. When the number of vehicles in the parking unit does not exceed 3, the unit
In addition to leaving the car entrance and exit and the necessary access passages, the fireproof partition wall and the fire resistance limit are not lower than other parts.
When 1.0h of non-combustible floor slabs are separated, the maximum number of parking spaces allowed in a fire zone is 300 (see 5.4.4);
--- Revised the traffic signs and markings in the reservoir area clearly and conspicuously and accurately (see 5.4.5);
--- Added special area for charging in the library, using special equipment (see 5.4.7);
--- Increased the long-term storage of electric vehicles should be equipped with emergency fire-fighting clothing, water-drop fire extinguishers and other fire-fighting facilities (see 5.4.8);
--- Revised the handover inspection should be carried out in accordance with the relevant provisions of WB/T 1069 (see 6.3);
--- Modified the code and type analysis of the storage quality loss should use the relevant content in WB/T 1021 (see 6.4.3);
--- Deleted the total storage in formula (2) = total inventory at the beginning of the assessment period (see 10.2);
--- Modified the inventory integrity rate in formula (3) = 1 - storage loss rate (see 10.2).
This standard was proposed by the China Federation of Logistics and Purchasing.
This standard is under the jurisdiction of the National Logistics Standardization Technical Committee (SAC/TC269).
This standard was drafted. China Logistics and Purchasing Federation Automobile Logistics Branch, FAW Car Co., Ltd., Anji Automobile Logistics Unit
Co., Ltd., Tianjin Anda Logistics Co., Ltd., Beijing Changjiu Logistics Co., Ltd., Changchun Huayang Storage and Transportation Co., Ltd., FAW Logistics
Ltd., Tianjin Elite Supply Chain Management Co., Ltd., Dongfeng Motor Co., Ltd., Chongqing Changan Minsheng Logistics Co., Ltd.
The main drafters of this standard. Shen Tingrui, Yang Liukou, Chen Qifeng, Qiu Lifu, Chen Lei, Hua Yu, Du Gang, Wang Yintao, Zhou Xiao, Guo Jinyu,
Li Hongmei, Ma Zengrong.
The previous versions of the standards replaced by this standard are.
---WB/T 1034-2006.
Passenger car storage service specification
1 Scope
This standard specifies the warehousing requirements, warehousing service requirements, pick-up and delivery, etc. during the storage process of passenger cars.
This standard applies to the warehousing service of passenger cars.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 3730.1 Terms and definitions for types of cars and trailers
GB/T 31152 Automotive Logistics Terminology
WB/T 1069 Passenger Car Transportation Service Specification
3 Terms and definitions
The following terms and definitions as defined in GB/T 3730.1, GB/T 31152, WB/T 1069 apply to this document.
3.1
Passenger car passengercar
In its design and technical characteristics, it is mainly used for vehicles carrying passengers and their carry-on baggage and/or temporary items, including the driver’s seat.
No more than 9 seats in the room. It can also tow a trailer.
[GB/T 3730.1-2001, definition 2.1.1]
3.2
Passenger car storage storageofpassengercar
The service process of storage and storage, storage, protection, maintenance and management of passenger cars and vehicles.
3.3
Warehousing side storage
The enterprise, party or agent who stores the passenger car.
3.4
Warehousing quality damage qualitydamageinstorage
The quality defects, damages, defects and non-original parts of the passenger car caused by the storage process.
Note. “Non-original specified components” in this standard is “non-required components” in WB/T 1069.
3.5
Warehousing instruction warehouseinstructions
A set of warehousing information that is communicated to the warehousing party, including the goods, the deliverer, the consignee, the time, and so on.
[GB/T 31152-2014, definition 6.3]
3.6
Warehousing information management system storageinformationmanagementsystem
Based on modern tools and means such as computers and communication networks, it serves the system of information processing in the field of warehouse management.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of WBT1034-2018_English be delivered?Answer: Upon your order, we will start to translate WBT1034-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of WBT1034-2018_English with my colleagues?Answer: Yes. The purchased PDF of WBT1034-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version WBT1034-2018?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version WBT1034-2018 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|