|
US$259.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
TYT3601-2023: Code for Use of Rowing Equipment
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| TY/T 3601-2023 | English | 259 |
Add to Cart
|
3 days [Need to translate]
|
Code for Use of Rowing Equipment
| Valid |
TY/T 3601-2023
|
PDF similar to TYT3601-2023
Basic data | Standard ID | TY/T 3601-2023 (TY/T3601-2023) | | Description (Translated English) | (Three wheel vehicle half shaft) | | Sector / Industry | Sports Industry Standard (Recommended) | | Date of Implementation | 2024-06-01 | | Older Standard (superseded by this standard) | GB/T 23921-2009 | TYT3601-2023: Code for Use of Rowing Equipment---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 97.220.40
CCSY56
Sports Industry Standards of the People's Republic of China
Instructions for use of rowing equipment
Published on 2023-09-01
Implemented on 2023-11-01
Released by the State Sports General Administration
Table of contents
Preface III
1 Scope 1
2 Normative reference documents 1
3 Terms and Definitions 1
4 Requirements for rowing boat selection 2
5 Rowing product requirements 2
5.1 Rowing components 2
5.2 Rowing boat weight requirements 3
6 Check before use 3
6.1 Appearance and accessories inspection 3
6.2 Rowing boat debugging 3
7 Requirements for using water areas 7
8 Marking, packaging, transportation and storage7
8.1 Flag 7
8.2 Packaging 7
8.3 Transport8
8.4 Storage 8
9 Maintenance 8
Foreword
This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents"
Drafting.
Certain contents of this document may be covered by patents. The publisher of this document assumes no responsibility for identifying patents.
This document is proposed by the Chinese Rowing Association.
This document is under the jurisdiction of the State Sports General Administration.
This document was drafted by. Chinese Rowing Association, Hangzhou Liangjin Boating Co., Ltd., Hangzhou Kanghua Boating Co., Ltd., Hangzhou Qiandao Lake Pearson
Boat Co., Ltd., Hangzhou Feiying Boat Co., Ltd., Hangzhou Fuyang Ark Boat Co., Ltd.
The main drafters of this document. Chen Chunxin, Wang Yan, Mao Xiaorong, Shentu Weiying, Shao Junping, Zhu Peiwu, Xiong Ying, Fang Wenyou.
Instructions for use of rowing equipment
1 Scope
This document stipulates the selection requirements, product requirements, pre-use inspection, usage water requirements, and
Marking, packaging, transportation, storage and maintenance.
This document applies to rowing equipment used for competitions, training and other activities in still water areas. For rowing equipment for other types of activities, please refer to
use.
2 Normative reference documents
The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated references
For documents, only the version corresponding to the date applies to this document; for undated referenced documents, the latest version (including all amendments) applies.
used in this document.
GB/T 13412 Technical conditions for rowing boats, kayaks, rowing boats and their accessories
3 Terms and definitions
The following terms and definitions apply to this document.
3.1
Rowing
The boat is shaped like a weaving shuttle. There are movable seats in the cabin. The oars are placed on the oar bolts of the oar rack. The oar rack stretches out on both sides of the boat. The oarsmen move forward with their backs facing each other.
The direction is stroked with the paddle pin as the axis.
3.2
lengthofboat
The distance from the leading edge of the bow (including the safety ball) to the trailing edge of the stern.
Note. The unit is meters (m).
3.3
breadthofboat
The maximum width between the outer chords on both sides of the hull (excluding seaboards).
Note. The unit is meters (m).
3.4
depthofboat
The maximum vertical distance between the centerline of the bottom of the boat and the sheer line.
Note. The unit is meters (m).
3.5
oar lock angle
The angle between the working surface of the propeller bolt and the vertical line.
Note. This angle includes the longitudinal angle and transverse angle of the propeller bolt.
3.6
oarlockheight
When the sliding seat is in the lowest position, the vertical distance between the propeller bolt and the lowest part of the sliding seat.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of TYT3601-2023_English be delivered?Answer: Upon your order, we will start to translate TYT3601-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of TYT3601-2023_English with my colleagues?Answer: Yes. The purchased PDF of TYT3601-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|