Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
SN/T 4124-2015 | English | 359 |
Add to Cart
|
3 days [Need to translate]
|
Technical requirements for the inspection of import and export electric welding machines. Energy efficiency of electric welding machines
| Obsolete |
SN/T 4124-2015
|
PDF similar to SN/T 4124-2015
Standard similar to SN/T 4124-2015 GB/T 41861 GB/T 40337 GB/T 8118
Basic data Standard ID | SN/T 4124-2015 (SN/T4124-2015) | Description (Translated English) | Technical requirements for the inspection of import and export electric welding machines. Energy efficiency of electric welding machines | Sector / Industry | Commodity Inspection Standard (Recommended) | Classification of Chinese Standard | J64 | Classification of International Standard | 25.160.30 | Word Count Estimation | 9,989 | Date of Issue | 2015-02-09 | Date of Implementation | 2015-09-01 | Quoted Standard | GB/T 2900.22; GB/T 8118; GB 15579.1; GB 28736 | Regulation (derived from) | State-Quality-Inspection-Accreditation [2015] 59 | Issuing agency(ies) | General Administration of Customs | Summary | This standard specifies the energy efficiency of the import and export of welding requirements, test methods and results determined. This standard applies to industrial and professional use designed by the three-phase four-wire or three-phase three-wire 220/380 V nominal voltage of 380/660 V power supply welding machine. This standard applies to energy efficiency inspection of import and export welding. This standard does not apply to AC TIG arc welding, AC and DC TIG arc welder, limited by the mechanical device driven arc welder as well as non-professionals to use for manual metal arc welding power supply load. |
SN/T 4124-2015: Technical requirements for the inspection of import and export electric welding machines. Energy efficiency of electric welding machines ---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Welder welding inspection technology import and export requirements for energy efficiency)
People's Republic of China Entry-Exit Inspection and Quarantine Standards
Importers Welding Inspection Technology Requirements
Energy efficiency welder
Issued on. 2015-02-09
2015-09-01 implementation
People's Republic of China
The State Administration of Quality Supervision, Inspection and Quarantine released
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
Please note that some of the content of this document may involve patents. Distribution of this document
Institutions do not assume the responsibility to identify these patents.
This standard is proposed and managed by the National Certification and Accreditation Administration Committee.
This standard by the People's Republic of China Fujian Entry-Exit Inspection and Quarantine, Shenzhen People's Republic of China, the Chinese people
Zhejiang People's Republic of Exit Inspection and Quarantine, China Institute of Metrology is responsible for drafting.
The main drafters of this standard. Panzeng Rong, NI-sensitive, even Pei Rong, Zhou Xin, Lin Xiaohong, milk Lei Hua, Tang Shao Zhao, leaves Germany to live, Liu Huijun.
Importers Welding Inspection Technology Requirements
Energy efficiency welder
1 Scope
This standard specifies the energy efficiency of the import and export of welding requirements, test methods and results determined.
This standard applies to industrial and professional use designed by the three-phase four-wire 220/380V or three-phase three-wire nominal 380/660V of
Voltage power supply of welding machine.
This standard applies to energy efficiency inspection of import and export welding.
This standard does not apply to AC TIG arc welding, AC and DC TIG arc welding, mechanical equipment driven arc welder and
Non-professionals use to limit the load of manual metal arc welding power source.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 2900.22 Electrotechnical terminology Welder
GB/T 8118 General technical requirements for arc welding machines
GB 15579.1 welding equipment - Part 1. Welding power sources (IEC 60974-1.2005, IDT)
GB 28736 arc welder energy efficiency and energy efficiency level limit
3 Terms and Definitions
GB/T 8118, GB 15579.1 and GB 28736 and defined by the following terms and definitions apply to this document.
3.1
Welder electricweldingmachine
The welding energy is converted into electrical energy and enables the entire plant equipment welding operation, including welding power supplies and accessories.
3.2
Arc welder arcweldingmachine
Heat of molten metal by arc welding machine and welding.
3.3
Compliance Verification mode moduleofcomplianceverification
According to the mandatory requirements of national technical specifications, inspection certificate and inspection documents, goods are consistent with the random testing can be carried out when necessary, and real
Shi supervision of the conformity assessment procedures.
NOTE. rewrite SN/T 1429.1-2005, the definition of 3.3.
3.4
Inspection Lot inspectionlot
The same specifications for the implementation of inspection and collection of models from the same manufacturer under the same production conditions of production per unit of product, referred to as batch.
NOTE. rewrite SN/T 1429.1-2005, the definition of 3.4.
|