|
US$219.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
SN/T 3480.5-2019: (Technical requirements for inspection of complete sets of equipment for imported electronics and electrical industry. Part 5: Special equipment for motor manufacturing)
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| SN/T 3480.5-2019 | English | 219 |
Add to Cart
|
3 days [Need to translate]
|
(Technical requirements for inspection of complete sets of equipment for imported electronics and electrical industry. Part 5: Special equipment for motor manufacturing)
| Valid |
SN/T 3480.5-2019
|
PDF similar to SN/T 3480.5-2019
Basic data | Standard ID | SN/T 3480.5-2019 (SN/T3480.5-2019) | | Description (Translated English) | (Technical requirements for inspection of complete sets of equipment for imported electronics and electrical industry. Part 5: Special equipment for motor manufacturing) | | Sector / Industry | Commodity Inspection Standard (Recommended) | | Classification of Chinese Standard | K48 | | Word Count Estimation | 10,177 | | Date of Issue | 2019-10-25 | | Date of Implementation | 2020-05-01 | | Regulation (derived from) | General Administration of Customs Announcement No. 166 of 2019 | | Issuing agency(ies) | General Administration of Customs | SN/T 3480.5-2019: (Technical requirements for inspection of complete sets of equipment for imported electronics and electrical industry. Part 5: Special equipment for motor manufacturing)
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Technical requirements for inspection of complete sets of equipment for imported electronics and electrical industry.Part 5. Special equipment for motor manufacturing)
ICS 29.100.01K97
People's Republic of China Entry-Exit Inspection and Quarantine Industry Standard
SN/T 3480.5-2019
Imported electrical and electronic equipment
Inspection technical requirements. Part 5. Special equipment for motor manufacturing
Published on October 19,.2015
2020-05-01 implementation
Published by the General Administration of Customs of the People's Republic of China
Foreword
There are 5 parts in the SN/T 3480 "Technical Requirements for the Inspection of Complete Equipment for Imported Electronic and Electrical Industries".
--- Part 1. Surface mount equipment for printed circuit boards;
--- Part 2. Special equipment for wire and cable manufacturing;
--- Part 3. Special equipment for flat panel display manufacturing;
--- Part 4. Semiconductor packaging test equipment;
--- Part 5. Special equipment for motor manufacturing.
This part is the fifth part of Sn/T 3480.
This section is drafted according to the requirements of GB/T 1.1-2009.
Please note that some of this section may involve patents. The issuing authority of this section is not responsible for identifying these patents.
This section is proposed and managed by the General Administration of Customs of the People's Republic of China.
This section was drafted by Xiamen Customs of the People's Republic of China and Qingdao Customs of the People's Republic of China.
The main drafters of this section. Yan Weimin, Zhao Ziyan, Wei Yizhan, Jiang Ke, Zhong Biju, Chen Jingyuan, Huang Yihan, Zheng Haipeng.
SN/T 3480.5-2019
Imported electrical and electronic equipment
Inspection technical requirements. Part 5. Special equipment for motor manufacturing
1 Scope
This part of SN/T 3480 specifies the inspection technical requirements for special equipment for imported motor manufacturing.
This section applies to the inspection of special equipment for motor manufacturing (see Appendix A) as defined in 3.1.
The equipment can also be used by reference.
2 Normative references
The following documents are essential for the application of this document. For dated references, only the dated version applies to this document.
file. For undated references, the latest version (including all amendments) applies to this document.
GB/T 2900.39 Electrical terminology Motor, transformer special equipment
GB/T 16679 Noise sound pressure level measurement method for metal cutting machine tools
SN/T 3700-2013 General requirements for inspection technical requirements for import and export complete sets of equipment
3 Terms and definitions
The terms and definitions defined in GB/T 2900.39, Sn/T 3700-2013 and the following apply to this document.
3.1
Equipment, insulation treatment equipment and other equipment.
4 Technical requirements
4.1 General requirements
The general requirements for the technical requirements for inspection of special equipment for motor manufacturing shall comply with the requirements of Article 4.1 of Sn/T 3700-2013.
4.2 Requirements for safety projects
4.2.1 Machinery safety requirements
4.2.1.1 shall meet the requirements of Article 4.2.2 of Sn/T 3700-2013.
4.2.1.2 There should be an emergency stop button in the obvious operating position; the equipment will stop due to failure or power failure. When the failure is removed or the power is restored
After that, press the start or reset button to continue working.
4.2.2 Electrical safety requirements
4.2.2.1 It shall meet the requirements of Article 4.2.3 of Sn/T 3700.
SN/T 3480.5-2019
4.2.2.2 When using 500V and above insulation resistance tester to measure between the electrical circuit of the electrical control device and the grounding device,
The edge resistance should not be less than 1MΩ.
4.2.2.3 The fluting machine shall have good over-voltage and over-current protection.
4.2.2.4 Small motor stator end binding machine, small stator end shaper, small motor stator winding wire winding machine should be connected after installation
The ground and ground connection should be reliable and firm.
4.2.2.5 Use a ground resistance tester to measure between the ground terminal of the electrical control device and any metal component equipped with electrical appliances.
The measurement result should not be greater than 0.1Ω.
4.2.3 Requirements for safety protection devices and warning methods
4.2.3.1 It shall meet the requirements of Article 4.2.4 of Sn/T 3700-2013.
4.2.3.2 The pedal device of the notching machine and the exposed parts of the equipment running at high speed shall be protected.
4.2.4 Non-mechanical safety requirements
It shall meet the requirements of Article 4.2.5 of Sn/T 3700-2013.
4.2.5 Material and material safety requirements
It shall meet the requirements of Article 4.2.6 of Sn/T 3700-2013.
4.2.6 Ergonomic requirements
It shall meet the requirements of Article 4.2.7 of Sn/T 3700-2013.
4.2.7 Information requirements
4.2.7.1 It shall meet the requirements of Article 4.2.8 of Sn/T 3700-2013.
4.2.7.2 There should be various signs such as lubrication, operation and safety that meet the requirements of the regulations, and they can be kept clear for a long time.
4.2.7.3 The notching machine shall have various signs or signs indicating the requirements for lubrication, safe operation, etc., and zero-rotation motors, flywheels, etc.
For the parts, the arrow of correct rotation direction should be marked on the conspicuous part.
4.2.8 Other related requirements
4.2.8.1 It shall meet the requirements of 4.2.2.9.1, 4.2.2.9.2, 4.2.9.3, 4.2.2.9.4, 4.4.2 of SN/T 3700-2013. 2.9.6, 4.2.9.7, 4.2.9.8
Claim.
4.2.8.2 The micro-motor commutator's lower engraving machine shall have an air pressure detection alarm device. When the air supply pressure is lower than the set lower limit value, the device shall issue an alarm
It cannot be started or stopped automatically.
4.3 Requirements for environmental protection projects
4.3.1 It shall meet the requirements of Article 4.3 of Sn/T 3700-2013.
4.3.2 The noise during the operation of special equipment for motor manufacturing shall not be greater than 85 dB (A), unless otherwise specified in the relevant standards or technical documents.
4.3.3 Small motor stator end binding machine, small stator end shaper, slot insulation forming cutting machine, small motor stator winding wire winding
The wire machine, wire embedding machine, and stator slot insulation inserting machine should be tested for noise according to GB/T 16679. The noise during normal operation of the equipment should not be
More than 75dB (A).
4.3.4 The micro-motor commutator under the engraving machine should be tested for noise according to GB/T 16679. The noise during normal operation of the equipment should not exceed
70dB (A).
4.3.5 Noise sound pressure level of notching operation of fluting machine shall not be greater than 80dB (A), and shall not be changed periodically.
SN/T 3480.5-2019
4.4 Requirements for health projects
It shall meet the requirements of Article 4.4 of Sn/T 3700-2013.
5 Inspection
5.1 Inspection items are divided into key inspection items and general inspection items. Key inspection items should be regarded as mandatory inspection items, and general inspection items can be viewed
Select the actual situation for inspection.
5.2 Inspection of special equipment for motor manufacturing shall be carried out at the corresponding inspection stage in accordance with the inspection items, inspection basis and inspection methods specified in Table 1.
Implement inspection.
Table 1 Inspection items, inspection basis and inspection methods
No. Item Category Inspection Item Inspection Based on Inspection Method Implementation Inspection Stage A B C
1 Mechanical safety requirements for safety items ★ 4.2.1 Inspection/function test √ √ √
2 Electrical safety requirements for safety projects ★ 4.2.2 Inspection/testing/function test √ √ √
3 Requirements for safety protection devices and warning methods for safety projects ★ 4.2.3 Inspection/function test √ √ √
4 Non-mechanical safety requirements for safety items ★ 4.2.4 Inspection/testing/functional test √ √ √
5 Substance and material safety requirements for safety projects ★ 4.2.5 Inspection/testing/functional test √ √ √
6 Ergonomic requirements for safety projects 4.2.6 Inspection/function test √ √
7 Information requirements for the use of security projects ★ 4.2.7 Inspection/data review √ √
8 Other relevant requirements for security projects 4.2.8 Inspection/data review √ √ √
9 Environmental protection project Requirements for environmental protection project 4.3 Testing/data review√
10 Hygiene Project Requirements for Health Project 4.4 Inspection/Data Review √
Note 1. "A" pre-shipment inspection, "B" field installation and commissioning inspection, and "C" field trial operation inspection.
Note 2. "★" key inspection items, "√" option.
SN/T 3480.5-2019
Appendix A
(Informative appendix)
Motor manufacturing special equipment
A. 1 Overview
The special equipment for motor manufacture is mainly composed of coil and stator and rotor manufacturing equipment, core manufacturing equipment, insulation processing equipment and other equipment.
A. 2 Coil and stator and rotor manufacturing equipment
The coil, stator and rotor manufacturing equipment mainly includes Table A. Equipment listed in 1.
Table A. 1 Chinese and English comparison table for coil, stator and rotor manufacturing equipment
Chinese name for coil and stator and rotor manufacturing equipment English name for coil and stator and rotor manufacturing equipment
Winding machine Coilwinding machine
Horizontal Winding Machine Horzontal Winding Machine
Vertical Winding Machine Vertical Winding Machine
Flat-winding machine Strip-on-edging window machine
String mode winding machine
Small motor stator winding wire mold winding machine Statocoilwinding machine
Stator Coiling Machine
Stator-wound embedded wire combination machine Combination machine performance machine
Rotor Winding Machine Rotorcoilwindingdinningmachine
Rotary Rotary Winding and Inserting Machine Turn-tyrotorcoilwinding motorschining machinery
Rotor-fixed rotor winding machine
Main-phase coil compaction machine Main-phase co-pressing machine
Stator End Shaping Machine Statorover Coilforminking
Small Motor Stator End Shaping Machine
End pre-shaping machine Overhanging Forming Machine
End middle shaping machine Overhancing Commination Forming Forging
End final shaping machine Overhangolinfingerminchine
Groove Insulation Forming and Cutting Machine Slotting
Slot insulation forming inserting machine Slotsuplingspinningsing machine
Stator slot insulation inserting machine Stator'sslotinintinizing machine
Multi-slot slot insulation forming inserting machine Multi-slottinshaopingpinningsing machine
Slot Wedge Forming Cutting Machine Sliding Forming Cutout Machine
Slot Wedge Insertion Machine Sliding Gearing Machine
SN/T 3480.5-2019
Table A. 1 (continued)
Chinese name for coil and stator and rotor manufacturing equipment English name for coil and stator and rotor manufacturing equipment
Stator detection marking slot combo machine Combination machine inspection, letering electronics
Coil expansion machine Coilxpanning machine
Coil orthopedic machine Coilformecgyingmachine
Stator single head strapping machine Single-headstorator
Stator double-head lashing machine Double-headstorator
Double-station stator lashing machine Statolacerwitdualstatins
Small motor stator end strapping machine Statorover-hanging machine-milling machine
Rotor binding machine Rotorlacer
Taping machine Taping machine
Frame Coil Taping Machine Diamond Coil Taping Machine
Desktop strapping machine Benchpetapiemingmachine
Stator bar strapping machine Taping machine forstorbar
Electric heating charter Electricy Heated Wrapped Pinching Machine
Electrostatic ring (plate) bandaging machine Wrapping machine forcing stamping
Frame-type coil presses Diamoncollo BLACK PRECESS
Stator bar moulding machine Pressprestortorbar
Drop paint machine Trikleimpregnating machine
Stator drip paint machine Statelighting machinery
Rotor Drip Painter Armature Trimming Premigning Machine
A. ３ Iron core manufacturing equipment
Core manufacturing equipment mainly includes Table A. 2 listed equipment.
Table A. ２ Chinese and English name comparison table of iron core manufacturing equipment
Chinese name of iron core manufacturing equipment English name of iron core manufacturing equipment
Grooving machine Notching Press
Automatic Grooving Machine Automatching
Internal positioning slotting machine Spindle-type-fixing-pointing channels
Outer Positioning Punching Machine Ring-tyfiverenting
Sector Sheet Notching Machine Segment Notch Ching Press
Combining slotting unit for combined slotting unit
Automatic Grooving Winding Machine Automating Winding Stamping Machine
SN/T 3480.5-2019
Table A. 2 (continued)
Chinese name of iron core manufacturing equipment English name of iron core manufacturing equipment
Stator core stacking machine Statorstocking machine
Rotor core lamination machine Rotorstatking machine
(Iron chip) Deburring machine Burr-grinding machine
Silicon Steel Sheet Continuous Annealing Furnace
A. ４ Insulation processing equipment
Insulation processing equipment mainly includes Table A. Equipment listed in 3.
Table A. 3 Chinese and English names of insulation treatment equipment
Other equipment Chinese name Other equipment English name
Vapor Phase Drying Equipment Vapor Phase Drying Plant
Hot Air Circulation Vacuum Drying Furnace Vacuum Cooling
Vacuum-pressure impregnation equipment Vacumpresuirepregnantion
Variable pressure vacuum drying equipment Pressurincreasing dyeing
Epoxy vacuum casting equipment Epoxyrevacumcumcasting
Impregnating tank
Vacuum tank Autoclave
Horizontal impregnation tank Horizontalpregnantion tank
Vertical impregnation tank Verticlimpignation tank
Paint storage tank
Epoxy spraying machine Coaching machine
A. 5 other equipment
Other equipment mainly includes Table A. 4 listed content.
Table A. 4 Chinese and English names of other equipment
Other equipment Chinese name Other equipment English name
Commutator Undercutting Machine Commutator Undercutting Machine
Micro-motor commutator under engraving machine Microcomormoutatortorcutting machine
Commutator welding machine commutator welding machine
Rotor die-casting aluminum machine Aluminum die-casting machine
Rotor low-pressure cast aluminum machine Low-pressurium alloy-casting machine-foror
SN/T 3480.5-2019
Table A. 4 (continued)
Other equipment Chinese name Other equipment English name
Rotor heat jacket machine Rotorshkinking machine
Motor Bearing Pressing Machine Beaingshine Kinmachine
Motor assembly production line Motolassmbling
Motor End Cover Presses Endover Press
Motor core presses Pressor motor press
Silicon steel sheet painting machine Coaing machine floor machine
SN/T 3480.5-2019
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of SN/T 3480.5-2019_English be delivered?Answer: Upon your order, we will start to translate SN/T 3480.5-2019_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of SN/T 3480.5-2019_English with my colleagues?Answer: Yes. The purchased PDF of SN/T 3480.5-2019_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|