| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| SN/T 1631.4-2007 | English | 319 |
Add to Cart
|
3 days [Need to translate]
|
Rules for the inspection of machine tools for import and export. Part 4: Grinder
| Obsolete |
SN/T 1631.4-2007
|
PDF similar to SN/T 1631.4-2007
Basic data | Standard ID | SN/T 1631.4-2007 (SN/T1631.4-2007) | | Description (Translated English) | Rules for the inspection of machine tools for import and export. Part 4: Grinder | | Sector / Industry | Commodity Inspection Standard (Recommended) | | Classification of Chinese Standard | J59 | | Classification of International Standard | 25.080.99 | | Word Count Estimation | 8,855 | | Date of Issue | 2007-12-24 | | Date of Implementation | 2008-07-01 | | Quoted Standard | GB/T 191-2000; GB/T 2828.1; GB 5226.1-2002; GB 15760; JB 8799-1998; SN/T 0002 | | Regulation (derived from) | Industry standard filing Notice 2008 No. 2 (No. 98 overall) | | Issuing agency(ies) | General Administration of Customs | | Summary | This standard specifies the export grinders sampling, testing and conformity determination. This standard applies to the maximum wheel diameter 100 mm ~ 250 mm Lightweight Bench grinders, maximum wheel diameter 150 mm ~ 250 mm for bench grinders, the maximum wheel diameter 200 mm ~ 600 mm of floor sanders and grinders Dust export test. This section does not apply to hand-held straight grinder test. | SN/T 1631.4-2007: Rules for the inspection of machine tools for import and export. Part 4: Grinder---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rules for the inspection of machine tools for import and export.Part 4. Grinder
Exit inspection and quarantine industry standard book People's Republic of China
Import and export of machine tool inspection procedures
Part 4. Grinders
Posted 2007-12-24
2008-07-01 implementation
People's Republic of China
The State Administration of Quality Supervision, Inspection and Quarantine released
Foreword
SN/T 1631 "import and export of machine tools for the inspection," consists of four parts.
--- Part 1. General requirements;
--- Part 2. CNC machine tools;
--- Part 3. grinder;
--- Part 4. Grinders.
This section SN/T 1631 "import and export of machine tools for the inspection," Part 4.
This section proposed and managed by the National Certification and Accreditation Administration Committee.
This section is drafted. Jiangsu CIQ.
The main drafters of this section. Schaeffer, Huangxi Qin, Li Chen.
This section first release of exit inspection and quarantine industry standards.
Introduction
"Import and export of machine tools for the inspection," the import and export of machine tool inspection work in accordance with the import and export of machine tool inspection play a guiding
And normative role.
With China's accession to the World Trade Organization (WTO) and the revised "People's Republic of China Import and Export Commodity Inspection Law" Import and Export Commodity Inspection
Test mode has undergone great changes, and changes in order to adapt to the situation, the state department in charge of inspection and quarantine inspection and quarantine standards organization established
system.
This part belongs to the standard system of inspection and quarantine fourth floor --- personality standard specifies requirements for import and export inspection and grinders.
Import and export of machine tool inspection procedures
Part 4. Grinders
1 Scope
SN/T 1631 provisions of this part of the sampling, testing and conformity Importers grinder determination.
This section applies to the maximum wheel diameter 100mm ~ 250mm light Bench grinders, maximum wheel diameter 150mm ~
Import and export inspection 250mm bench grinder, maximum wheel diameter 200mm ~ floor sanders and grinders 600mm of dust.
This section does not apply to hand-held straight grinder test.
2 Normative references
The following documents contain provisions which, through reference SN/T 1631 to the present, constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this
section.
GB/T 191-2000 Packaging - Pictorial signs (eqv ISO 780.1997)
GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan
(GB/T 2828.1-2003, ISO 2859-1.1999, IDT)
GB 5226.1-2002 Safety of machinery electrical equipment Part 1. General requirements (IEC 60204-1.2000, IDT)
GB 15760 metal cutting machine tool safety general technology condition
JB8799-1998 grinder safety and technical conditions
The basic provisions of SN/T 0002 Electromechanical Import and Export Commodity Inspection procedures prepared
3 Terms and Definitions
GB/T 2828.1, SN/T 0002 and established the following terms and definitions apply to this part of the SN/T 1631's.
3.1
According to the mandatory requirements of national technical specifications, batch import and export commodities or pumping grant implementation sampling, testing and inspection of conformity assessment activities.
3.2
Mandatory requirements according to national technical specifications type testing, according to the scene to examine the provisions of the product lot testing, and quality of enterprises
The amount of qualified supervision and management system implementation determination activities.
3.3
Implementation of sampling and collection of the same specifications, models produced under the same conditions of production per unit of product, referred to as batch.
4 General requirements
4.1 safety and environmental protection requirements
Safety and environmental protection requirements for sanders should meet GB 5226.1-2002, GB 15760 and JB8799-1998 requirements. When applicable,
|