|
US$239.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
SN/T 1631.6-2012: Rules for the inspection of machines for import and export. Part 6: Shaping machine
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| SN/T 1631.6-2012 | English | 239 |
Add to Cart
|
3 days [Need to translate]
|
Rules for the inspection of machines for import and export. Part 6: Shaping machine
| Valid |
SN/T 1631.6-2012
|
PDF similar to SN/T 1631.6-2012
Basic data | Standard ID | SN/T 1631.6-2012 (SN/T1631.6-2012) | | Description (Translated English) | Rules for the inspection of machines for import and export. Part 6: Shaping machine | | Sector / Industry | Commodity Inspection Standard (Recommended) | | Classification of Chinese Standard | J50 | | Word Count Estimation | 9,938 | | Older Standard (superseded by this standard) | SN/T 0359-1995 | | Quoted Standard | GB/T 191; GB 5226.1-2008; GB/T 9061; GB/T 13264; GB 15760-2004; GB/T 16769; JB/T 3362.1-2006; JB/T 3362.2-2011; JB/T 3362.3-2006; SN/T 0002; SN/T 2755.4 | | Regulation (derived from) | National Quality Inspection (2012) 777; industry standard filing Notice 2013 No. 4 (No. 160 overall) | | Issuing agency(ies) | General Administration of Customs | | Summary | This standard specifies the export Shaper sampling, testing, inspection results to determine and unqualified disposal. This standard applies to export Shaper test. | SN/T 1631.6-2012: Rules for the inspection of machines for import and export. Part 6: Shaping machine
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rules for the inspection of machines for import and export.Part 6. Shaping machine
People's Republic of China Entry-Exit Inspection and Quarantine Standards
Instead of the SN/T 0359-1995
Import and export of machine tool inspection procedures
Part 6. Shaper
Part 6. Shapingmachine
Issued on. 2012-12-12
2013-07-01 implementation
People's Republic of China
The State Administration of Quality Supervision, Inspection and Quarantine released
Foreword
SN/T 1631 "import and export of machine tools for the inspection," is divided into six parts.
--- Part 1. General requirements;
--- Part 2. CNC machine tools;
--- Part 3. grinder;
--- Part 4. Grinders;
--- Part 5. WEDM;
--- Part 6. Shaper.
This section SN/T 1631 Part 6.
This section drafted in accordance with GB/T 1.1-2009 given rules.
The partial replacement of SN/T 0359-1995 "Shaper export inspection procedures."
This section compared with the SN/T 0359-1995, the main technical changes are as follows.
--- Modify the scope of this section relates about;
--- Adjust and add some reference standards;
--- Modify the standard structure, terminology and testing to refine the content type testing.
This section proposed and managed by the National Certification and Accreditation Administration Committee.
This section was drafted by. People's Republic of China Shandong CIQ.
The main drafters of this section. Wang Zhuang, Li Zhao Xue, Xu Jian, Yu Bo, pack Dayong.
This part of the standard replaces the previous editions are.
--- SN/T 0359-1995.
Introduction
"Import and export of machine tools for the inspection," the import and export of machine tool inspection work in accordance with the import and export of machine tool inspection play a guiding
And normative role.
With China's accession to the World Trade Organization (WTO) and the revised "People's Republic of China Import and Export Commodity Inspection Law" Import and Export Commodity Inspection
Test pattern has undergone great changes, therefore, the inspection and quarantine departments in charge of the State to establish a system of inspection and quarantine standards. This part belongs to inspection
The fourth layer (mechanical and electrical test Standard System Layer) --- personality criteria for the inspection of special requirements Shaper quarantine standard system.
Import and export of machine tool inspection procedures
Part 6. Shaper
1 Scope
This section SN/T 1631 provides for import and export Shaper of sampling, testing, test results and determination unqualified disposal.
This section applies to the import and export inspection Shaper.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 191 Packaging - Pictorial signs
GB 5226.1-2008 Safety of machinery electrical equipment Part 1. General technical conditions
GB/T 9061 General technical conditions for metal cutting machine tools
GB/T 13264 percent nonconforming small lot sampling inspection procedures and sample forms
GB 15760-2004 Metal-cutting machine tool safety general technology condition
GB/T 16769 Metal Cutting Machine noise level measurement method
JB/T 3362.1-2006 Shaper - Part 1. Parameters
JB/T 3362.2-2011 Shaper - Part 2. Testing of the accuracy
JB/T 3362.3-2006 Shaper - Part 3. Technical requirements
Basic requirements SN/T 0002 Electromechanical Import and Export Commodity Inspection Machine written procedure
SN/T 2755.4 industrial products export enterprise management - Part 4. Test the basic requirements of regulation
3 Terms and definitions
SN/T 0002 and SN/T 2755.4 and define the following terms and definitions apply to this document.
3.1
Inspection Lot inspectionlot
The same size/model for the implementation of inspection and collection, and under the same conditions produced a number of units of the product (referred batch).
3.2
Type Test mode modeoftypetest
Mandatory requirements based on national technical specifications type tests, batch import and export commodities or pumping grant implementation sampling, testing and inspection
Conformity assessment activities.
3.3
Compliance Verification mode modeofcomplianceverification
According to the mandatory requirements of national technical specifications, conformity assessment of import and export commodities inspection of the technical documentation and the necessary sampling inspection
activity.
|