|
US$114.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
SN/T 1083.4-2012: Determination of total moisture in coke
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| SN/T 1083.4-2012 | English | 114 |
Add to Cart
|
3 days [Need to translate]
|
Determination of total moisture in coke
| Valid |
SN/T 1083.4-2012
|
PDF similar to SN/T 1083.4-2012
Standard similar to SN/T 1083.4-2012 GB/T 2001 GB/T 2006 GB/T 1997 SN/T 3799 Basic data | Standard ID | SN/T 1083.4-2012 (SN/T1083.4-2012) | | Description (Translated English) | Determination of total moisture in coke | | Sector / Industry | Commodity Inspection Standard (Recommended) | | Classification of Chinese Standard | H32 | | Word Count Estimation | 6,699 | | Quoted Standard | GB/T 1997-2008 | | Adopted Standard | ISO 579-1999, IDT | | Regulation (derived from) | National Quality Inspection (2012) 777; industry standard filing Notice 2013 No. 4 (No. 160 overall) | | Issuing agency(ies) | General Administration of Customs | | Summary | This standard specifies the coke Determination of total moisture. This standard applies to the blast furnace coke, foundry coke and other high-temperature coking products Determination of total moisture. | SN/T 1083.4-2012: Determination of total moisture in coke---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Determination of total moisture in coke
People's Republic of China Entry-Exit Inspection and Quarantine Standards
Determination of total moisture of coke
(ISO 579.1999Coke-Determinationoftotalmoisture, IDT)
Issued on. 2012-12-12
2013-07-01 implementation
People's Republic of China
The State Administration of Quality Supervision, Inspection and Quarantine released
Foreword
SN/T 1083 series of standards is divided into four parts.
--- Part 1. Coke analytical sample moisture, rapid determination of ash;
--- Part 2. Determination of the phosphorus content of coke;
--- Part 3. Determination of sulfur content in coke instrumental method;
--- Part 4. Determination of total moisture of coke.
This section SN/T 1083 Part 4.
This section drafted in accordance with the rules of GB/T 1.1-2009 and GB/T 20001.4-2001 given.
This part identical with ISO 579.1999 (E) "Determination of total moisture in coke."
For ease of use, this part of ISO 579.1999 (E) made the following editorial changes.
--- "This International Standard" be replaced by "this standard";
"." --- With a decimal point instead of a comma as the decimal point, "";
--- Delete foreword international standards;
--- Normative reference document, with the GB/T 1997-2008 instead of ISO 9411-2 and ISO 13909-6.
This section proposed and managed by the National Certification and Accreditation Administration Committee.
This section was drafted by. People's Republic of China Ningbo Exit Inspection and Quarantine.
The main drafters of this section. forest edge, Zhang Jianbo, Zheng Lin, Liu Mei, Zhu Bo, Wang Qian, Pu Qi.
Determination of total moisture of coke
1 Scope
SN/T 1083 provisions of this section for the determination of total moisture in coke.
This section applies to the blast furnace coke, foundry coke and other high temperature coking products in the determination of total moisture.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 1997-2008 and preparation of coke samples
3 Method summary
The sample is heated in air to 120 ℃ ~ 200 ℃ and maintained at that temperature until sample constant weight, by the mass loss of the sample to calculate the moisture
Mass fraction.
4 Instrument
4.1 oven, the temperature can be controlled within a range of 120 ℃ ~ 200 ℃, and there is sufficient air exchange rate.
4.2 platter, an area of about 0.1m2, a depth of about 25mm, made of corrosion-resistant materials such as stainless steel, galvanized iron or aluminum.
4.3 balance, a sense of the amount of 1g.
5 Sample
Test samples of total moisture in accordance with GB/T 1997-2008 were taken and prepared and stored in a sealed container. All samples
Jaw crusher to 16mm or less, reduced from minutes to obtain laboratory samples. During the operation it should be noted that water is not a result of ventilation and loss
Loss, or fly ash sample should not have lost.
Obviously wet sample and is expected to more than 15% of water samples prior to crushing and pre-drying should be reduced points. Air drying step, see
GB/T 1997-2008. Obviously moist air dried sample and measuring the residual moisture should be carried out in the same laboratory.
Step 6 Analysis
Weighing platter clean, dry air (4.2), accurate to 1g. Add about 1kg laboratory samples, spread evenly and weighed, accurate to 1g.
The trays containing the sample (4.2) into the oven 120 ℃ ~ 200 ℃ for (4.1) inside. After the drying process, come loaded from oven
There are dried immediately weighed sample trays, to prevent the absorption of moisture during the cooling process.
If you are unsure whether the drying process is complete, at 120 ℃ ~ 200 ℃ drying continues until the change in mass of not more than 0.1%.
Specific oven, quality time constant weight should be experimentally determined.
NOTE. If available, drying can be conducted at a lower temperature, such as hard coal with 105 ℃ ~ 110 ℃.
|