| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| SN/T 0813.3-2007 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Rules for the inspection of metalforming machine for import and export. Part 3: folder and slitter
| Obsolete |
SN/T 0813.3-2007
|
PDF similar to SN/T 0813.3-2007
Standard similar to SN/T 0813.3-2007 JB/T 13910.2 JB/T 13910.1 JB/T 1647.2 Basic data | Standard ID | SN/T 0813.3-2007 (SN/T0813.3-2007) | | Description (Translated English) | Rules for the inspection of metalforming machine for import and export. Part 3: folder and slitter | | Sector / Industry | Commodity Inspection Standard (Recommended) | | Classification of Chinese Standard | J62 | | Classification of International Standard | 25.120.10 | | Word Count Estimation | 7,725 | | Date of Issue | 2007-12-24 | | Date of Implementation | 2008-07-01 | | Quoted Standard | Industry standard filing Notice 2008 No. 2 (No. 98 overall) | | Regulation (derived from) | Accredidation-Technology-Letter [2015] No. 247 | | Issuing agency(ies) | General Administration of Customs | | Summary | This standard specifies the export slitting machine bending sampling, inspection and judgment. This standard applies to the maximum bending thickness not exceeding 3mm slitting machine bending steel slitting machine import and export inspection. | SN/T 0813.3-2007: Rules for the inspection of metalforming machine for import and export. Part 3: folder and slitter
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rules for the inspection of metalforming machine for import and export Part 3. Folder and slitter
Exit inspection and quarantine industry standard book People's Republic of China
Forging Machinery Import and Export Inspection Regulations
Part 3. Bending Slitting Machine
Posted 2007-12-24
2008-07-01 implementation
People's Republic of China
The State Administration of Quality Supervision, Inspection and Quarantine released
Foreword
SN/T 0813 "Forging Machinery Import and Export Inspection Regulations" is divided into three parts.
--- Part 1. General requirements;
--- Part 2. sheet metal bending machine;
--- Part 3. Bending slitting machine.
This section SN/T 0813 "Forging Machinery Import and Export Inspection Regulations" Part 3.
This section proposed and managed by the National Certification and Accreditation Administration Committee.
This section drafted by. People's Republic of China Zhejiang Exit Inspection and Quarantine.
The main drafters of this Part. Chapter GB, Zhu Rong, Lu Wuchang, Li Bingqiang.
This section first release of exit inspection and quarantine industry standards.
Introduction
"Forging Machinery Import and Export Inspection procedures - Part 3. Bending Slitting Machine" is the import and export of forging machine slitting machine bending test work
Basis, the import and export forging machine slitting machine bending test play a guiding and regulating.
With China's accession to the World Trade Organization (WTO) and the revised "People's Republic of China Import and Export Commodity Inspection Law" Import and Export Commodity Inspection
Test mode has undergone great changes, and changes in order to adapt to the situation, the state department in charge of inspection and quarantine inspection and quarantine standards organization established
system.
This standard belongs to the inspection and quarantine standards of the fourth layer (mechanical and electrical test Standard System Layer) --- personality criteria for the import and export of forging
Pressure testing machine bending slitting machine specific requirements.
Forging Machinery Import and Export Inspection Regulations
Part 3. Bending Slitting Machine
1 Scope
SN/T 0813 provisions of this part of the sampling, testing and judgment Importers bending slitting machine.
This section applies to test the maximum bending Slitting thickness of no more than 3mm steel plate bending slitting machine import and export.
2 Normative references
The following documents contain provisions which, through reference SN/T in this section 0813 constitute provisions of this part. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this
section.
GB/T 191 Packaging - Pictorial signs (GB/T 191-2000, eqv ISO 780.1997)
GB 5226.1-2002 Safety of machinery electrical equipment Part 1. General requirements (idt IEC 60204-1.2000)
GB 17120-1997 Metalforming machinery - Safety requirements
GB 18209.2 Safety of machinery - Indication, marking and actuation - Part 2. Requirements for marking (GB 18209.2-2000,
idt IEC 61310-2.1995)
JB/T 3623 forging machinery noise measurement method
JB/T 8832-2001 CNC system General technical conditions
JB9976 plate bending machine folding machine noise limits
JB10148-1999 plate bending machine safety and technical conditions
The basic provisions of SN/T 0002 Electromechanical Import and Export Commodity Inspection procedures prepared
3 Terms and Definitions
SN/T 0002 and established the following terms and definitions apply to SN/T 0813 of this section.
3.1
Standard style of things or events.
3.2
Prescribed by the state inspection and quarantine departments for import and export commodity inspection, import and export commodities conduct of supervision and management of enterprises.
3.3
According to the mandatory requirements of national technical specifications, batch import and export commodities or pumping grant implementation sampling, testing and inspection of conformity assessment activities.
3.4
Produced under the same conditions, the same types of specifications with a number of products for inspection lot, short batch.
|