QC/T 1051-2017 (QCT 1051-2017)

Standard ID	Contents [version]	USD	STEP2	[PDF] delivered in	Standard Title (Description)	Related Standard	Status	PDF
QC/T 1051-2017	English	219	Add to Cart	3 days	Driving school training vehicle	QC/T 1051-2017	Valid	QC/T 1051-2017

QC/T 1051-2017
Driving school training vehicle
Coach car
1 Scope
This standard specifies the terms and definitions, requirements, test methods, inspection rules, signs, on-board documents, transportation and storage of coaches.
This standard applies to Class N and M coaches, and other types of coaches are implemented by reference.
2 Normative references
The following documents are essential for the application of this standard. For dated references, only the dated version applies to this
standard. For undated references, the latest version (including all amendments) is applicable to this standard.
GB 4094 Marks for automobile controls, indicators and signaling devices
GB 7258-2012 technical requirements for motor vehicle safety
GB/T 12534 General rules for automotive road test methods
GB 1 5 0 8 4 Performance and installation requirements for indirect vision devices of motor vehicles
GB/T 1 8 4 1 1 Road vehicle product label
QC/T 252 Special vehicle type test rules
QC/T 4 8 4 Automotive paint coating
3 terms and definitions
Column F terms and definitions apply to this standard.
3.1
Basic type motor vehicle
It is a basic vehicle of the same vehicle type as the coach and is not equipped with a special device for the coach.
3.2
Auxiliary brake equipment
A device that performs braking control at the front passenger position and can effectively brake.
3.3
Auxiliary horn switch
Horn switch for steering control in front passenger position.
3.4
Auxiliary rearview mirror
Rear-view mirror mounted on the vehicle and used at the front passenger position.
3.5
Automotive timing meter terminal interface
Interface device for connecting chronograph terminal.
3.6
Auxiliary steering wheel
A steering wheel for steering in the front passenger position.
3.7
Deputy turn signal lamp switch
A switch for turning signal lights at the front passenger position.
3.8
Engine speed limiting device
A device that controls the engine speed within the engine speed range.
4 Requirements
4.1 Vehicle
4.1.1 The coach and its base vehicle shall meet the requirements of this standard and relevant mandatory standards, and shall be in accordance with the product plan approved by the prescribed procedures.
Sample and technical documentation.
4.1.2 Outsourced parts and outsourced parts shall comply with the relevant standards and be used only after they have passed the inspection of the inspection department.
4.1.3 The coach body markings shall comply with the provisions of GB 7258.
4.1.4 On the basis of the structure of the base vehicle, the coach shall be equipped with auxiliary brakes, auxiliary horn switches, auxiliary rear-view mirrors, and on-board chronometers.
The terminal interface can be equipped with auxiliary steering wheels, auxiliary steering lights, and engine speed limiting devices as required.
4.1.5 Special equipment for coaches shall meet the following requirements.
a) The position of the controls of each special device should be easy to operate and reliable in performance;
b) Each component and movement mechanism should be assembled firmly, the structure is reasonable, the work is reliable, and there is no adverse effect on the performance of the base vehicle;
c) Welds are uniform, straight, no missing welds, cracks, slag inclusions, porosity, welding penetration and other defects, no burrs or sanding on the casting surface;
d) The surface of metal parts shall be treated with anti-rust, and the paint coating shall meet the requirements of QC/T 484.
4.2 Special equipment
4.2.1 Auxiliary braking device.
4.2.1.1 The relative position of the auxiliary brake pedal and the seat of the auxiliary brake device shall be relative to the relative position of the brake pedal and the seat of the base car
the same.
4.2.1.2 When operating the auxiliary brake pedal of the auxiliary brake device, its braking function shall be the same as that of the base vehicle brake pedal.
4.2.2 The auxiliary brake pedal force shall comply with the relevant provisions of 7.10.2.3 of GB 7258-2012. The stroke of the auxiliary brake pedal should meet
Relevant p