|
US$329.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
NB/T 47019.5-2021: (Technical requirements for ordering boiler and heat exchanger tubes - Part 5: Stainless steel)
Status: Valid NB/T 47019.5: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| NB/T 47019.5-2021 | English | 329 |
Add to Cart
|
3 days [Need to translate]
|
(Technical requirements for ordering boiler and heat exchanger tubes - Part 5: Stainless steel)
| Valid |
NB/T 47019.5-2021
|
| NB/T 47019.5-2011 | English | 140 |
Add to Cart
|
0--9 seconds. Auto-delivery
|
Purchase technical specification for boiler and heater exchanger tubes/pipes. Part 5: Stainless steel
| Obsolete |
NB/T 47019.5-2011
|
PDF similar to NB/T 47019.5-2021
Basic data | Standard ID | NB/T 47019.5-2021 (NB/T47019.5-2021) | | Description (Translated English) | (Technical requirements for ordering boiler and heat exchanger tubes - Part 5: Stainless steel) | | Sector / Industry | Energy Industry Standard (Recommended) | | Classification of Chinese Standard | J75 | | Word Count Estimation | 14,156 | | Issuing agency(ies) | National Energy Administration | NB/T 47019.5-2011
ICS 27.060.30
J 75
NB
INDUSTRY STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
Purchase technical specification for boiler & heater
exchanger tubes/pipes - Part 5. Stainless steel
ISSUED ON. JULY 01, 2011
IMPLEMENTED ON. OCTOBER 01, 2011
Issued by. National Energy Administration
Table of contents
Foreword ... 3
1 Scope ... 5
2 Normative references ... 5
3 General requirements ... 6
4 Dimensions and shapes ... 6
5 Technical requirements ... 7
6 Test methods ... 12
7 Inspection rules ... 12
8 Packaging, marking and quality certificates ... 14
ForewordThis standard NB/T 47019-2011 “Purchase technical specification for boiler &
heater exchanger tubes/pipes” was compiled with reference to the European
standard EN, United States standard ASME, Japan standard JIS, and so on,
combining with China's national standards and industry standards, AND the
purchase agreement of boiler and heat exchanger manufacturers.
This standard covers the purchase technical specifications for the steel tubes
and non-ferrous metal tubes which are normally used in boiler, heat exchangers
and other pressure equipment. It is mainly divided into the following eight parts.
- Part 1. General requirements;
- Part 2. Non-alloy and alloy steel with room temperature properties;
- Part 3. Non-alloy and alloy steel with specified elevated temperature
properties;
- Part 4. Low alloy steel for low-temperature services.
- Part 5. Stainless steel;
- Part 6. Ferrite/austenitic duplex steel;
- Part 7. Copper and copper alloy tube;
- Part 8. Titanium and titanium alloy.
This part is the fifth part of NB/T 47019-2011. As compared with the domestic
and international standards, the main differences are as follows.
- SPECIFY the composition and performance of seamless steel tube and
welded steel tube;
- ADD the specifications for the inspection items as agreed between both
parties;
- SPECIFY the stricter packaging requirements;
This part of the standard was proposed by AND shall be under the jurisdiction
of the National Boiler and Pressure Vessel Standardization Technical
Committee (SAC/TC 262).
This drafting organizations of this part. China Special Equipment Testing and
Research Institute, Gansu Lanke Petrochemical High-tech Equipment Co., Ltd.,
China Special Equipment Testing and Research Institute, Jiangsu Wujin
Stainless Steel Tube Factory Group Co., Ltd., Haiyan Zhongda Special Steel
Co., Ltd., Wuxi Tengyue Special Steel Tube Co., Ltd, Zhejiang Jiuli Hi-tech
Metals Co., Ltd.
The main drafters of this part. Pan Jianguo, Zhang Yanfeng, Zhou Wenxue,
Wang Weiguo, Zhang Xian, Song Jianxin, Xu Yaosong, Shao Yu.
As for this part, the National Boiler and Pressure Vessel Standardization
Technical Committee (SAC/TC 262) will be responsible for its interpretation.
Purchase technical specification for boiler & heater
exchanger tubes/pipes - Part 5. Stainless steel
ScopeThis part specifies the classification and marking, technical requirements, test
methods, inspection rules, packaging, marking and quality requirements for
seamless and welded stainless steel tubes.
This part applies to seamless and welded stainless steel tubes for boilers and
heat exchangers.
Normative ReferencesThe following documents are essential to the application of this document. For
the dated documents, only the versions with the dates indicated are applicable
to this document; for the undated documents, only the latest version (including
all the amendments) are applicable to this document.
GB/T 222 Permissible tolerances for chemical composition of steel products
GB/T 223 (all parts) Methods for chemical analysis of iron steel and alloy
GB/T 228 Metallic materials – Tensile testing at ambient temperature
GB/T 230.1 Metallic materials – Rockwell hardness test – Part 1. Test
method
GB/T 241 Metal materials – Tube – Hydrostatic pressure test
GB/T 242 Metal materials – Tube – Drift-expending test
GB/T 246 Metal materials – Tube – Flattening test
GB/T 2102 Acceptance packing marking and quality certification of steel pipe
GB/T 2975 Steel and steel products – Location and preparation of test pieces
for mechanical testing
GB/T 4334 Corrosion of metals and alloys – Test methods for intergranular
corrosion of stainless steel
flattened, the weld on the sample shall be free from cracks, insufficient
penetration, or folding due to inner weld finishing.
5.5.4 Reverse bending test
As for the tube with the ratio of wall thickness to outer diameter less than 10%
OR the wall thickness less than 3.4 mm OR the outer diameter less than 9.5
mm, it shall be subjected to the reverse bending test. After the test, the sample
shall be free from cracks or folding due to inner weld finishing.
5.6 Water pressure test
5.6.1 The steel tube shall be subjected to water pressure test one by one. The
maximum test pressure shall not exceed 20 MPa AND the pressure regulation
time shall be 10 s.
5.6.2 Where the purchaser has no requirement, the manufacturer may use the
eddy current test in lieu of the water pressure test. When the eddy current test
is used to replace the water pressure test, the artificial defects of the contrasting
sample tube and the acceptance level shall comply with the requirements of
level A in GB/T 7735.
5.7 Underwater sealing test
As requested by the purchaser, the welded tube may be subjected to the
underwater sealing test in accordance with NB/T 47019.1.
5.8 Intergranular corrosion
The tube shall be, in accordance with the method E of GB/T 4334, subjected to
the intergranular corrosion test. If requested by the purchaser AND noted in the
contract, it is also allowed to use other intergranular corrosion test methods.
5.9 Non-destructive test
5.9.1 The seamless tube shall be subjected to the ultrasonic detection one by
one, AND the longitudinal depth level of the contrasting sample tube shall
comply with the provisions of L2.5 in GB/T 5777.
5.9.2 The welded tube shall be subjected to the eddy current test one by one,
AND the artificial defects and acceptance level of the contrasting sample tube
shall comply with the provisions of level A in GB/T 7735.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of NB/T 47019.5-2021_English be delivered?Answer: Upon your order, we will start to translate NB/T 47019.5-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of NB/T 47019.5-2021_English with my colleagues?Answer: Yes. The purchased PDF of NB/T 47019.5-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version NB/T 47019.5-2021?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version NB/T 47019.5-2021 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|