|
US$429.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
NB/T 11640-2024: Wireless remote control device for mining equipment
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| NB/T 11640-2024 | English | 429 |
Add to Cart
|
4 days [Need to translate]
|
Wireless remote control device for mining equipment
| Valid |
NB/T 11640-2024
|
PDF similar to NB/T 11640-2024
Basic data | Standard ID | NB/T 11640-2024 (NB/T11640-2024) | | Description (Translated English) | Wireless remote control device for mining equipment | | Sector / Industry | Energy Industry Standard (Recommended) | | Classification of Chinese Standard | D98 | | Classification of International Standard | 29.260.20 | | Word Count Estimation | 19,116 | | Date of Issue | 2024-09-24 | | Date of Implementation | 2025-03-24 | | Issuing agency(ies) | National Energy Administration | NB/T 11640-2024: Wireless remote control device for mining equipment---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/NBT11640-2024
Wireless remote control device for mining equipment
Energy Industry Standards of the People's Republic of China
The National Energy Administration released
Wireless remote control device for coal mining equipment
Released on September 24, 2024
2025-03-24 Implementation
CCS D 98
ICS 29.260.20
Preface III
1 Scope 1
2 Normative references 1
3 Terms and Definitions 2
4 Product Model and Category 2
5 Technical Requirements 3
6 Test methods 7
7 Inspection Rules 11
8 Marking, packaging, transportation and storage 13
Table of Contents
Preface
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents"
Drafting.
Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.
This document was proposed by the Science and Technology Development Department of the China Coal Industry Association.
This document is under the jurisdiction of the Coal Industry Coal Mine Safety Standardization Technical Committee.
This document was drafted by. China Coal Technology and Engineering Group Shenyang Research Institute Co., Ltd., Shaanxi Guangtai Mining Electromechanical Equipment Co., Ltd., Beijing Yilianzhi
Control Technology Co., Ltd., Fushun China Coal Technology and Engineering Testing Center Co., Ltd., Anbiao National Mining Product Safety Marking Center Co., Ltd., Zhejiang Hualuo
Communications Equipment Co., Ltd., National Engineering Laboratory for Coal Mining Machinery and Equipment.
The main drafters of this document are. Ma Long, Qian Xu, Qi Wenting, Li Zhe, Li Zhenxin, Chang Lin, Zhang Yujia, Guo Yongqiang, Hu Eryi, Wang Shubo, Wang Lei,
Xu Mingying, Pan Yanan, Liu Yajun, Chen Qing, Zhai Qingni, Tang Yong, Zhang Shengda, Tian Hongxian, and Zhang Jianjun.
Wireless remote control device for coal mining equipment
1 Scope
This document specifies the product classification, technical requirements, test methods, inspection rules and marking, packaging, and other requirements of wireless remote control devices for coal mining equipment.
Packaging, transportation and storage.
This document is applicable to wireless remote control devices for mining equipment used in underground coal mines, non-coal mines and open-pit coal mines (hereinafter referred to as
device).
2 Normative references
The contents of the following documents constitute the essential clauses of this document through normative references in this document.
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to this document.
document.
GB/T 191 Pictorial markings for packaging, storage and transportation
GB/T 2423.1-2008 Environmental testing for electric and electronic products Part 2.Test methods Test A. Low temperature
GB/T 2423.2-2008 Environmental testing for electric and electronic products Part 2.Test methods Test B. High temperature
GB/T 2423.4-2008 Environmental testing for electric and electronic products Part 2.Test methods Test Db. Cyclic damp heat (12 h
12 h cycle)
GB/T 2423.5-2019 Environmental testing Part 2.Test methods Test Ea and guidance. Shock
GB/T 2423.7-2018 Environmental testing Part 2.Test methods Test Ec. Shock caused by rough operation (mainly used for
Equipment type sample)
GB/T 2423.10-2019 Environmental testing Part 2.Test methods Test Fc. Vibration (sinusoidal)
GB/T 3836.1 Explosive atmospheres Part 1.General requirements for equipment
GB/T 3836.2 Explosive atmospheres Part 2.Equipment protected by flameproof enclosure "d"
GB/T 3836.3 Explosive atmospheres Part 3.Equipment protected by increased safety "e"
GB/T 3836.4 Explosive atmospheres Part 4.Equipment protected by intrinsic safety type "i"
GB/T 3836.9 Explosive atmospheres Part 9.Equipment protected by encapsulation type "m"
GB/T 4208 Degrees of protection provided by enclosures (IP Code)
GB/T 9969 General Principles for Instructions for Use of Industrial Products
GB/T 10111 Random number generation and its application in product quality sampling inspection
GB/T 12173 General electrical equipment for mining
GB/T 17626.2 Electromagnetic compatibility test and measurement technology Electrostatic discharge immunity test
GB/T 17626.3 Electromagnetic compatibility test and measurement techniques Part 3.Radio frequency electromagnetic field radiated immunity test
GB/T 17626.4 Electromagnetic compatibility test and measurement technology Electrical fast transient burst immunity test
GB/T 17626.5 Electromagnetic compatibility test and measurement technology surge (shock) immunity test
AQ 1043 Mining Product Safety Signs and Labels
MT/T 210-1990 Basic test methods for electrical and electronic products used for communication, detection and control in coal mines
MT/T 899 Information transmission device for coal mines
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of NB/T 11640-2024_English be delivered?Answer: Upon your order, we will start to translate NB/T 11640-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of NB/T 11640-2024_English with my colleagues?Answer: Yes. The purchased PDF of NB/T 11640-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|