|
US$479.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
NB/T 11639-2024: General specification of drilling robot for gas prevention and control in coal mine
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| NB/T 11639-2024 | English | 479 |
Add to Cart
|
4 days [Need to translate]
|
General specification of drilling robot for gas prevention and control in coal mine
| Valid |
NB/T 11639-2024
|
PDF similar to NB/T 11639-2024
Basic data | Standard ID | NB/T 11639-2024 (NB/T11639-2024) | | Description (Translated English) | General specification of drilling robot for gas prevention and control in coal mine | | Sector / Industry | Energy Industry Standard (Recommended) | | Classification of Chinese Standard | D98 | | Classification of International Standard | 73.100 | | Word Count Estimation | 21,290 | | Date of Issue | 2024-09-24 | | Date of Implementation | 2025-03-24 | | Issuing agency(ies) | National Energy Administration | NB/T 11639-2024: General specification of drilling robot for gas prevention and control in coal mine
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/NBT11639-2024
General specification of drilling robot for gas prevention and control in coal mine
Energy Industry Standards of the People's Republic of China
The National Energy Administration released
Coal mine gas prevention and control drilling robot
General technical conditions
General specification of drilling robot for gas prevention and
control in coal mine
Released on September 24, 2024
2025-03-24 Implementation
CCS D 98
ICS 73.100
Preface III
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Model and meaning 2
5 Technical Requirements 3
6 Test methods 8
7 Inspection Rules 13
8 Labeling, instruction manual, packaging, transportation and storage 15
Table of Contents
Preface
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents"
Drafting.
Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.
This document was proposed by the China Coal Industry Association.
This document is under the jurisdiction of the Coal Industry Coal Mine Safety Standardization Technical Committee.
This document was drafted by. China Coal Technology and Engineering Group Chongqing Research Institute Co., Ltd., Chongqing Safety Standard Testing Institute Co., Ltd., Safety Standard National Mining
Product Safety Marking Center Co., Ltd., China University of Mining and Technology, Huainan Mining (Group) Co., Ltd. Geological Exploration Engineering Branch, Shandong Energy
China Resources Group Co., Ltd., and Shenhua Energy Co., Ltd. Shenhua Coal Branch.
The main drafters of this document are. Wang Qingfeng, Xin Dezhong, Chen Hang, Zhang Lianjun, Du Lei, Wan Jun, Shi Zhiyuan, Deng Peng, Xiao Yuqing, Wang Zhongbin, Huang Yong,
Li Zhenjie, Ju Guanggang, Zhang Xiufeng, Li Xiaobo, Xue Chunrong, Si Lei, Liu Chuancheng, Zhang Haifeng, Wan Yuan.
Coal mine gas prevention and control drilling robot
General technical conditions
1 Scope
This document specifies the model and meaning, technical requirements, test procedures, and specifications of underground coal mine gas prevention and control drilling robots (hereinafter referred to as “drilling robots”).
Test methods, inspection rules, marking, instruction manual, packaging, transportation and storage.
This document is applicable to drilling robots used for gas prevention and control, anti-blowout and pressure relief, water exploration and drainage, geological exploration, etc. in coal mines.
2 Normative references
The contents of the following documents constitute the essential clauses of this document through normative references in this document.
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to this document.
document.
GB/T 191 Pictorial markings for packaging, storage and transportation
GB/T 2423.1 Environmental testing for electric and electronic products Part 2.Test methods Test A. Low temperature
GB/T 2423.2 Environmental testing for electric and electronic products Part 2.Test methods Test B. High temperature
GB/T 2423.3 Environmental testing Part 2.Test methods Test Cab. Steady state damp heat test
GB/T 3836.1 Explosive atmospheres Part 1.General requirements for equipment
GB/T 3836.2 Explosive atmospheres Part 2.Equipment protected by flameproof enclosure "d"
GB/T 3836.4 Explosive atmospheres Part 4.Equipment protected by intrinsic safety type "i"
GB/T 3836.9 Explosive atmospheres Part 9.Equipment protected by encapsulation type "m"
GB/T 4208 Degrees of protection provided by enclosures (IP Code)
GB/T 9969 General principles for instructions for use of industrial products
GB/T 10111 Random number generation and its application in product quality sampling inspection
GB/T 16754 Design principles for mechanical safety emergency stop
AQ 1043 Mining Product Safety Signs and Labels
AQ 6203 Low-concentration Carrier Catalytic Methane Sensor for Coal Mines
AQ 6205 Electrochemical Carbon Monoxide Sensor for Coal Mines
MT/T 98 Inspection specification for hoses and hose assemblies for hydraulic supports
MT/T 113 General test methods and criteria for flame retardancy and antistatic properties of polymer products for use in underground coal mines
MT/T 356 Coal Mine Underground Safety Engineering Drilling Rig
MT/T 818 (all parts) Coal mine cables
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
coal mine drilling robot for gas prevention and control
It consists of drilling system, traveling system, control system, drill rod loading and unloading device, etc., and is used for gas prevention and control drilling construction in coal mines.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of NB/T 11639-2024_English be delivered?Answer: Upon your order, we will start to translate NB/T 11639-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of NB/T 11639-2024_English with my colleagues?Answer: Yes. The purchased PDF of NB/T 11639-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|