HOME   Cart(1)   Quotation   About-Us Tax PDFs Standard-List
Powered by Google-Search & Google-Books www.ChineseStandard.net Database: 189760 (26 Nov 2022)

NB/SH/T 0940-2016 (NBSHT 0940-2016)

NB/SH/T 0940-2016_English: PDF (NBSHT0940-2016)
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)Related StandardStatusPDF
NB/SH/T 0940-2016English229 Add to Cart 3 days Standard test method for analysis of in-sevice lubicants using particular four-part integrated tester(Atomic emission spectroscopy, infrared spectroscopy, viscosity, and laser particle counter) NB/SH/T 0940-2016 Valid NB/SH/T 0940-2016

BASIC DATA
Standard ID NB/SH/T 0940-2016 (NB/SH/T0940-2016)
Description (Translated English) Standard test method for analysis of in-sevice lubicants using particular four-part integrated tester(Atomic emission spectroscopy, infrared spectroscopy, viscosity, and laser particle counter)
Sector / Industry Energy Industry Standard (Recommended)
Classification of Chinese Standard E34
Classification of International Standard 75.100
Word Count Estimation 10,182
Date of Issue 2016-12-05
Date of Implementation 2017-05-01
Quoted Standard GB/T 265; GB/T 1995; GB/T 4756; GB/T 11137; GB/T 14039; GB/T 17476; GB/T 18854; SH/T 0251; SH/T 0688; NB/SH/T 0853; NB/SH/T 0865; NB/SH/T 0870
Adopted Standard ASTM D7417-10, MOD
Drafting Organization China National Petroleum Corporation Lanzhou lubricants research and development center
Administrative Organization National Petroleum Products and Lubricants Standardization Technical Committee Lubricants Oil Index Technical Committee
Regulation (derived from) State Energy Administration Bulletin No.9 of 2016
Summary This standard applies to the use of automatic four-in-one tester (atomic emission spectroscopy, infrared spectroscopy, viscosity and laser particle counter) on the lubricating oil in the quantitative analysis. This standard applies to the analysis of ISO viscosity grade range of 10mm ^ (2)/s ~ 320mm ^ (2)/s of lubricating oil, the measured properties of the oil with reference to Table 1 and Table 2. This standard is intended for the trend analysis of wear and contamination of oil, but the test results may not be consistent with the test results of current national standards, industry standards and international standards. This standard is not used for crude oil analysis.